On Mon, May 02, 2005 at 01:26:00PM -0700, Richard Cagley wrote:
Tried that and didn't work.
I also tried with the basic RX card. I just put a wire in the middle of the
RX-A SMA connector but nothing came out there either.
Very odd.
I just tried the tvrx_wfm_rcv_gui code and noticed that I had
On Mon, May 02, 2005 at 05:50:44PM -0700, Richard Cagley wrote:
Thanks. I think it's a problem with the audio interface.
If I use the file as in cvs and change the decim to 225 and the
audio_decimation to 6 then I get close to 48k (actually, 47047). It doesn't
sound perfect, but it's at least
' [mailto:[EMAIL PROTECTED]
Sent: Monday, May 02, 2005 4:18 PM
To: Richard Cagley
Cc: discuss-gnuradio@gnu.org
Subject: Re: [Discuss-gnuradio] using a 48k sound card with wfm_rcv_gui
On Mon, May 02, 2005 at 01:26:00PM -0700, Richard Cagley wrote:
Tried that and didn't work.
I also tried
On Mon, May 02, 2005 at 07:38:51AM -0700, Richard Cagley wrote:
Eric,
Ok, this makes sense, but where do I make the change? Do I need to recompile
the audio sink code? I see this hw:0.0 thing mentioned in a header file in
gr/include/gnuradio but I can't seem to find the actual code location.
On Mon, May 02, 2005 at 11:12:07AM -0700, Richard Cagley wrote:
That worked. Thanks.
But, I still only get static (I even have an actual antenna hooked up to the
TV card). Is it because of the warning I'm getting?
[EMAIL PROTECTED] usrp]$ wfm_rcv_gui.py 93.7
RX d'board A: TV Rx
RX d'board
On Mon, May 02, 2005 at 01:26:00PM -0700, Richard Cagley wrote:
Tried that and didn't work.
I also tried with the basic RX card. I just put a wire in the middle of the
RX-A SMA connector but nothing came out there either.
Very odd.
Looking at the USRP oriented such that the USB connector is
-gnuradio] using a 48k sound card with wfm_rcv_gui
On Mon, May 02, 2005 at 01:26:00PM -0700, Richard Cagley wrote:
Tried that and didn't work.
I also tried with the basic RX card. I just put a wire in the middle of
the
RX-A SMA connector but nothing came out there either.
Very odd.
Looking
