Have a nice day.
> --
> *Gönderen:* Dor Ratz
> *Gönderildi:* 24 Mayıs 2022 Salı 21:53
> *Kime:* Oğuzhan Gedikli
> *Bilgi:* discuss-gnuradio@gnu.org
> *Konu:* Re: Transmitter and Receiver on the same SDR
>
> Great.
>
> Try to send a video of th
u: Re: Transmitter and Receiver on the same SDR
Hello Oğuzhan:
Also, I think your "Signal Source" block is misconfigured. The "Frequency" of
the "Signal Source" block is not the RF frequency of the signal, it is the
baseband frequency of the signal (so it should be lo
Bilgi: discuss-gnuradio@gnu.org
Konu: Re: Transmitter and Receiver on the same SDR
Great.
Try to send a video of the setup while it is working .
In addition, verify that if there are LED of the connectors they are powered on
while working. I don't remember if it should blink or something
B200s have wide range of
gain settings and is pretty much deaf at 0 dB.
Regards,
Kyeong su Shin
보낸 사람: Oğuzhan Gedikli 대신 Discuss-gnuradio
보낸 날짜: 2022년 5월 24일 화요일 오후 9:33
받는 사람: discuss-gnuradio@gnu.org
제목: Transmitter and Receiver on the same SDR
Hello, I have USR
rt, using this for
>receiver. The antennas have same gain.
>
> --
> *Gönderen:* Dor Ratz
> *Gönderildi:* 24 Mayıs 2022 Salı 19:12
> *Kime:* Oğuzhan Gedikli
> *Bilgi:* discuss-gnuradio@gnu.org
> *Konu:* Re: Transmitter and Receiver on the same S
.
Gönderen: Dor Ratz
Gönderildi: 24 Mayıs 2022 Salı 19:12
Kime: Oğuzhan Gedikli
Bilgi: discuss-gnuradio@gnu.org
Konu: Re: Transmitter and Receiver on the same SDR
Hey,
2 things:
1. Have you tried to raise the gain values in usrp sink and usrp source?
2. Did you
Hey,
2 things:
1. Have you tried to raise the gain values in usrp sink and usrp source?
2. Did you connect antenna to each port? Or is it connected with a cable?
Post a picture of the setup and it can help.
Best
Dor
בתאריך יום ג׳, 24 במאי 2022, 3:59 אחה״צ, מאת Oğuzhan Gedikli <
ouzan...@hotm
On 24/5/22 14:33, Oğuzhan Gedikli wrote:
Hello, I have USRP B200 and i use GNU Radio for design. I want to
transmit a random signal (whatever, is'nt important for now) I am
using the TX/RX port as transmitter and the RX2 port as receiver. I
can transmit signal without any problems but i can't r
Hello, I have USRP B200 and i use GNU Radio for design. I want to transmit a
random signal (whatever, is'nt important for now) I am using the TX/RX port as
transmitter and the RX2 port as receiver. I can transmit signal without any
problems but i can't receive it from other port. I am sending sc
