On 7/28/19 3:57 PM, hal wrote:
Some searching says to add "core_freq=250" or "enable_uart=1" but
so far still nothing. Any suggestions are appreciated.
Hi,
I got the serial port working. It's a bit of a task. Apparently the
bluetooth integration messed up the serial port configuration so
wh
On Sun, Jul 28, 2019 at 03:57:47PM -0500, hal wrote:
> Do you use a serial port on your PI 3? I purchased one last week
> on Ebay but have no serial output on the UART0_TXD + UART0_RXD pins.
>
> Some searching says to add "core_freq=250" or "enable_uart=1" but
> so far still nothing. Any suggesti
On Sun, Jul 28, 2019 at 10:33:09AM -0500, goli...@devuan.org wrote:
> On 2019-07-28 09:29, rgsid...@sunrise.ch wrote:
> > Hi, with the actual image, I encountered only one problem. I tried to
> > install it from a USB-stick, but the installer mixed up the partitions
> > and installed on /dev/sdb in
On 7/17/19 3:50 PM, Andreas Messer wrote:
On Tue, Jul 16, 2019 at 08:02:43PM -0500, hal wrote:
Hello,
Thank you. Here is the boot output from
devuan_ascii_2.0.0_armel_raspi1.img.xz and setting emmc clock to 50Mhz in
config.txt
The same sdcard will boot my Raspi A+ fine so maybe it's hardware?
On 2019-07-28 09:29, rgsid...@sunrise.ch wrote:
Hi, with the actual image, I encountered only one problem. I tried to
install it from a USB-stick, but the installer mixed up the partitions
and installed on /dev/sdb instead of /dev/sda. You have to correct
grub and the fstab respectively to avoid
Hi, with the actual image, I encountered only one problem. I tried to install
it from a USB-stick, but the installer mixed up the partitions and installed on
/dev/sdb instead of /dev/sda. You have to correct grub and the fstab
respectively to avoid a non bootable system. And be aware, that ther
Is there a current guide to installing Beowulf on a fresh machine in one
move? Or must Ascii go first and then followed by an in-place upgrade?
/Lars
___
Dng mailing list
Dng@lists.dyne.org
https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng