wrong... is it just that
I missed to /pgkmaster/deb/ in my sources.list?
libre Grüße,
Florian
--
\
\\
\ \
| |
/ \
| ils sont |
| brainfrickin' FOUS |
|ces romains!|
\__/
___
left
no
On a pure openbox system, the according configuration file should be
'~/.config/openbox/rc.xml'.
HTH & libre grüße,
Florian
___
Dng mailing list
Dng@lists.dyne.org
https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
.
> Best regards,
> Fred
A very interesting thread, never have I
been so close to hardware!
There's just one question itching me for a
little while now: Is it possible, that this
old mouse simply has some physical
issue, triggered by using button 2?
And if so, what would be the best
) 'read only', or have you
been able to write to it by other means?
libre Grüße,
Florian
___
Dng mailing list
Dng@lists.dyne.org
https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
f options out there. It should be easy to disable the
"wheel click" with libinput's 'ButtonMapping' option.
At home, I use a trackball with four buttons, which has the additional
advantage of living in peace with the tea cup on my narrow desk -_-
l
On Sat, 23 Apr 2022 21:15:34 +0200
Antony Stone wrote:
> On Saturday 23 April 2022 at 21:11:18, Florian Zieboll via Dng wrote:
>
> > On Sat, 23 Apr 2022 09:07:57 -0700 Fred wrote:
> [...]
> >
> > Some time ago, in a similar situation, I had been successful wi
worth a try:
$ man 5 xorg.conf
libre Grüße,
Florian
___
Dng mailing list
Dng@lists.dyne.org
https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
On April 22, 2022 12:21:02 AM GMT+02:00, aitor wrote:
> Hi Fred,
>
> On 21/4/22 23:39, Fred wrote:
>
> > I don't understand what you mean by virtual terminal.
>
> For sure the login prompts of tty2, tty3... brung up by holding down the
> Ctrl+Alt keys, and pressing one of the function keys
Libre Grüße,
Florian
--
[message sent otg]
___
Dng mailing list
Dng@lists.dyne.org
https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
a
> baud rate specification and gpm has an option for this. I know that gpm
> works with this mouse.
I have gpm running on chimaera, so it should be in the repository. Besides
that, 'consolation' had been mentioned on this list as a successor of gpm, but
I have not tried it yet.
On Tue, 19 Apr 2022 00:41:53 +0200
Florian Zieboll via Dng wrote:
> Dementia
Sorry, I mean: just don't feed it!
___
Dng mailing list
Dng@lists.dyne.org
https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
'OnAccessExcludeRootUID' or such
in my clamd.conf - and clamd did act on all other tested 'cat's and
"dogs".
NB: This thread is not meant to discuss why a cifs server might need a
virus scanner ;-)
libre Grüße,
Florian
___
Dng mailing list
Dng@list
On Tue, 19 Apr 2022 07:48:59 +1000
Ralph Ronnquist wrote:
> presuamably it now says daedalus with u rather than daedalas ?
Dementia is a b1tch, as tr0lls are...
onezero,
f.
___
Dng mailing list
Dng@lists.dyne.org
On Mon, 14 Mar 2022 22:25:51 +0100
Ludovic Bellière wrote:
> On Mon, 14 Mar 2022, Florian Zieboll via Dng wrote:
>
> [...]
> >
> >So I assume that it is 'tr' which recognizes that rsync's output is
> >already buffered and thus keeps this setting - while the output
see, if with 5Ghz I can go back to my plain old
config - and how it compares to 2.4GHz in a wooden House.
Thank you and libre Grüße,
Florian
BTW: I was very surprised to find chimaera's wicd depending on
networkmanager!
[1] https://cheatsheet.zwischenspeicher.info/2016/10/14-2017-02-05/
brevity on
> feedback latency. Instead of disabling buffering altogether, you can
> opt to use line buffers (option 'L') instead of the default 4k block
> buffer. That would, presumably, give you a line by line output.
Thank you for the hint: '-oL' works fine, too, and I am going to a
On March 14, 2022 3:38:43 PM GMT+01:00, "Ludovic Bellière"
wrote:
> Hello Florian,
>
> The output isn't going anywhere, it's simply being buffered. It's a
> default when a tool doesn't specify buffering behavior for stdout. In a
> chained pipe, the output will o
On March 14, 2022 11:42:16 AM GMT+01:00, Florian Zieboll via Dng
wrote:
>
> Where is it going resp. how do I catch it?
I was able to work around it by putting the 'tr'-logic in the "postprocessing"
logmailer script. This creates some overhead, as the script loops o
'\r'
'\n' > ./file
Where is it going resp. how do I catch it?
Thanks a lot in advance!
Florian
--
[message sent otg]
___
Dng mailing list
Dng@lists.dyne.org
https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
gt;
> Is there a way to ban it from future upgrades?
Chromium has a hard dependency on 'xdg-desktop-portal', although (IIUC)
it is only required by 'chromium-sandbox', which is /not/ a dependency
of Chromium.
libre Grüße,
Florian
___
Dng mailing list
Dng@lists.dyne.org
https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
On Thu, 24 Feb 2022 22:28:57 +0100
Florian Zieboll via Dng wrote:
> /troll mode
NB, for topical reasons: I suggest to check the shasums and correct me,
pgpsigned, if I'm wrong.
___
Dng mailing list
Dng@lists.dyne.org
ht
On Thu, 24 Feb 2022 22:14:19 +0100
aitor wrote:
> Only the netinst image requires network connection. This image
> contains just the minimal amount of packages to install the base
> system; from thereon the remaining packages are installed over the
> internet.
If you want an up-to-date offline
cdimage/archive/3.0_r6/i386/iso-cd/
scnr & LIBRE gRÜẞE,
Florian
___
Dng mailing list
Dng@lists.dyne.org
https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
On Sun, 20 Feb 2022 13:11:36 +
Antony Stone wrote:
> On Sunday 20 February 2022 at 12:57:07, Florian Zieboll via Dng wrote:
>
> > Dear list,
> >
> > I just want to share the two most important things I learned
> > yesterday:
> >
> > 1.) I can &q
;detaching" of processes
Thank you and libre Grüße,
Florian
___
Dng mailing list
Dng@lists.dyne.org
https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
On Sat, 19 Feb 2022 23:13:28 +0100
Florian Zieboll wrote:
> cum salutis gallicis,
PS: Damn, /is/ibus/, I guess...
___
Dng mailing list
Dng@lists.dyne.org
https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
On Sat, 19 Feb 2022 17:03:58 -0500
Ken Dibble wrote:
> Since you get this in every terminal window, I would look at .bashrc
> and .profile, as well as any shortcut that you use to open a terminal.
Yeah, thanks, that's how I got it :-)
___
Dng mailing
On Sat, 19 Feb 2022 23:00:59 +0100
Florian Zieboll via Dng wrote:
> Popcorn
florian@nulldevice:~$ cat .bashrc | grep tmp
rm -rf ~/tmp/*
Thanks for your attention - I hope you had fun ;-)
cum salutis gallicis,
Florian
___
Dng mailing list
On Sat, 19 Feb 2022 21:59:59 +0100
Florian Zieboll via Dng wrote:
> root@nulldevice:~# ls -l /home/florian/tmp/test*
> -rw-r--r-- 1 florian florian 0 Feb 19 21:11 /home/florian/tmp/test_deletable
> -rw-r--r-- 1 rootroot0 Feb 19 21:19 /home/florian/tmp/test_root
>
> $ rm cant_delete_me
>
> rm: cannot remove 'cant_delete_me' : Operation not permitted
>
> $ sudo rm cant_delete_me
>
> rm: cannot remove 'cant_delete_me' : Operation not permitted
>
> -
>
> See if the error message shows up in the logs.
Where would this
On Sat, 19 Feb 2022 20:36:29 +0100
Florian Zieboll via Dng wrote:
> On Sat, 19 Feb 2022 19:09:15 +0100
> "d...@d404.nl" wrote:
> >
> > Probably not helpful too but does auth.log show something from the
> > use of exec=¨/bin/su" ?
>
> Yes, as my
then 'sudo su -' from there, so I
have numerous sets like the following in the auth.log:
# cat /var/log/auth.log | grep -B2 -A5 '/bin/su'
Feb 19 20:15:24 nulldevice su: (to administrator) florian on pts/1
Feb 19 20:15:24 nulldevice su: pam_unix(su:session): session opened for user
administrator
On Sat, 19 Feb 2022 12:46:18 -0500
Ken Dibble wrote:
>
> Probably not helpful but did you check anacrontab?
Thank you for the hint, but nothing there but anacronically executed
crontab entries... Still helpful, as in the future I will check it
earlier :-)
libre Grüße,
F
On Sat, 19 Feb 2022 16:25:54 +0100
Florian Zieboll via Dng wrote:
> And here the relevant snippet of 'ps axjf':
>
> PPID PID PGID SID TTY TPGID STAT UID TIME COMMAND
> 1 8287 8286 8286 ? -1 Rl1001 0:01
> /usr/bin/qterminal
> 8287 8290
:
The 'audit.log' shows an 'exe="/bin/rm"' with 'ppid 8290' in the first
line, caught with
# auditctl -w /home/florian/tmp/test -p wa ; tail -f /var/log/audit/audit.log
type=SYSCALL msg=audit(1645279145.766:65): arch=c03e syscall=263
success=yes exit=0 a0=ff9c a1=5604372f44d0 a2=0 a3=ff
Am 27. Januar 2022 11:06:15 MEZ schrieb Mike Tubby :
> I have run the installation a second time and paid more attention, when
> it installs Grub it doesn't pop a menu asking where I want the boot
> loader installed (MBR, first partition,) or providing a list of 'drives'
> or block devices to
approach with LibreOffice is different from the one with
'/etc/aliases': LibreOffice can be used to create individualized
mailings, while via the 'aliases' each recipient would receive exactly
the same email (besides the 'To'-header of course).
libre Grüße
On Mon, 24 Jan 2022 21:44:35 +0100
Florian Zieboll via Dng wrote:
> (...)
Sorry, list, it was not my intension to talk politics here, damn: This
had been meant to go offlist!
I fell for the "$sendername" (via Dng) in the 'From' header.
libre G
d to the conventional ad
industry.
everlibre Grüße and best regards,
Florian
[1] Not sure about mine at the moment, at least regarding the latest
spin towards authoritarian support for pharmaceutical corporations
and their puppets. Although one might say that this is just the
l
on) with its new dracut-generated
initramfs, successfully.
libre Grüße,
Florian
___
Dng mailing list
Dng@lists.dyne.org
https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
On Sun, 23 Jan 2022 21:20:56 +0100
Florian Zieboll via Dng wrote:
> On Sun, 23 Jan 2022 20:29:39 +0100
> aitor wrote:
>
> > If the name swap happens randomly, then the required setting might
> > be:
> >
> > RESUME=none
> >
> > instead of:
> >
On Sun, 23 Jan 2022 20:23:51 +0100
tito via Dng wrote:
> On Fri, 21 Jan 2022 15:45:46 +0100
> Florian Zieboll via Dng wrote:
>
> >
> > Hallo list,
> >
> > after the latest kernel-update (chimaera, from 5.10.0-10-amd64 to
> > 5.10.0-11-amd64), my deskt
43df91-ac0a-419b-95e7-5c266447e543)
I: Set the RESUME variable to override this.
but this "attempt" then fails for some reason, although the initramfs
should have the correct info (and IIRC should just try the first
available swap partitio
On Sun, 23 Jan 2022 20:05:43 +0100
aitor wrote:
> Hi,
>
> On 23/1/22 19:54, Florian Zieboll via Dng wrote:
> > Returning to kernel 5.10.0-10-amd64 does NOT solve the issue, as
> > well as the upgrade to linux-image-5.15.0-0.bpo.2-amd64.
>
> If you are using sever
On Sun, 23 Jan 2022 19:54:34 +0100
Florian Zieboll via Dng wrote:
> I also just swapped the cables at the two disks: No change.
Now the disk with the swap partition appears as sdb, persistent over
at least four reboots - so this issue seems to have "dis
On Fri, 21 Jan 2022 13:29:11 -0600
Hector Gonzalez Jaime via Dng wrote:
>
> On 1/21/22 11:03, Florian Zieboll via Dng wrote:
> > On Fri, 21 Jan 2022 10:34:28 -0500
> > tempforever wrote:
> >
> >> Something to check/verify:
> >> If swap is listed
On January 21, 2022 7:15:06 PM GMT+01:00, o1bigtenor via Dng
wrote:
> Greetings
>
> For a non-profit - - - this is not bulk email for sales - - - - bulk
> email for connection.
>
> Is there a linux program (foss hopefully) that will allow me to do this?
>
> (Sending regualr emails to a group
On Sun, 23 Jan 2022 12:07:07 +0900
Olaf Meeuwissen via Dng wrote:
> Hi,
>
> Florian Zieboll via Dng writes:
>
> > On Fri, 21 Jan 2022 10:34:28 -0500
> > tempforever wrote:
> >
> >> Something to check/verify:
> >> If swap is listed in /etc/fstab,
On Fri, 21 Jan 2022 10:34:28 -0500
tempforever wrote:
> Something to check/verify:
> If swap is listed in /etc/fstab, then make sure it is listed by UUID
> rather than block-id.
> I mention this, since I have a (commented out) swap line in /etc/fstab
Yes, in the fstab, the swap partition is
s hard to miss.
Any hints are very welcome!
Libre Grüße,
Florian
___
Dng mailing list
Dng@lists.dyne.org
https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
le which cannot be started as a system daemon.
>
> Maybe the dnsmasq-base package a solution?
I can confirm that having dnsmasq-base installed is sufficient to start
the network.
libre Grüße,
Florian
___
Dng mailing list
Dng@lists.dyne.org
htt
On Wed, 19 Jan 2022 20:04:13 +0100 (CET)
k...@aspodata.se wrote:
> Florian:
> > On Wed, 19 Jan 2022 18:19:57 +0100 (CET)
> > k...@aspodata.se wrote:
> ...
> > > To paraphrase usenix:
> > >
> > > ;init:
> > >
> > > but
On Wed, 19 Jan 2022 18:19:57 +0100 (CET)
k...@aspodata.se wrote:
> Florian:
> ...
> > I like "init freedom" very much and think, that it's fully
> > sufficient resp. that it doesn't need any further comment (nor
> > advice).
> >
> > The
eeping the syntax intact:
> init freedom█
with a (blinking?) cursor at the end, seducing to hit [enter]...
This, I think, would make it even more obvious, that Devuan stands not
only for the freedom to choose among a number of init systems, but that
the this very choice will have a much
On Wed, 12 Jan 2022 10:39:07 +0100
Alessandro Vesely via Dng wrote:
> On Wed 12/Jan/2022 01:27:45 +0100 Florian Zieboll via Dng wrote:
> >
> > I am replying to the list to share the valid (tested) alternative.
> > Thanks a lot!
>
>
> Bash st
that makes perfectly sense... As I have
a strict "no whitespace policy" for my filesystems, I just wouldn't
ever have thought of a command to contain one - and am still somewhat
dumbfounded ;-)
Libre Grüße,
Florian
___
Dng mailing list
Dng@lists.dyne.org
https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
will also usually work
> X=$( "command and such" )
> due to the execute block.
Hallo William,
I am replying to the list to share the valid (tested) alternative.
Thanks a lot!
Libre Grüße,
Florian
___
Dng mai
ot;unrar x"
> bash: unrar x: command not found
> ~$
Hallo tempforever,
thank you for your quick and simple reply. Seems that I can go sleep
now :-)
The full script, an archive batch-extractor (zip and rar supported so
far) with absolutely no rights reserved, is attached.
libre Grüße,
F
command not found
???
Commands without parameters resp. whitespace (e.g. xcmd="unzip") work
fine when double-quoted; a web search (including the "GNU Bash manual"
[1]) did not shed any light on this mystery...
Thank you and libre Grüße,
Florian
[1] https://w
On Mon, 3 Jan 2022 19:22:44 +0100
Florian Zieboll via Dng wrote:
> a simple netcat'ed pdf
Well, "simple pdf" might be an oxymoron... but 'netcat' vs. 'cupsd'
bears an impressive simplification ;-)
___
Dng mailing list
Dng@lists.d
e netcat'ed pdf at port 9100:
$ nc '$hostname' 9100 < file.pdf
libre Grüße,
Florian
___
Dng mailing list
Dng@lists.dyne.org
https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
Hallo Hendrick,
just another possibility: If there's no intermediate print server,
grepping your local '/etc/cups/printers.conf' for 'DeviceURI' will
reveal the printer's IP address resp. its hostname as well.
Libre Grüße,
Florian
___
Dng mailing list
ly installed, 41 to remove and 0 not upgraded.
Hallo Didier,
do you perhaps have something like an auto-'autoclean' policy defined in your
apt configuration?
Libre Grüsse,
Florian
--
[message sent otg]
___
Dng mailing list
Dng@lists.dyne.org
https://m
ment I had been thinking of for a sleepless night was installing
busybox in an initramfs. I suspect Steve facepalming, but be assured:
This is canceled now. Thanks again for all the good input - I'll sure
be back with less off topic mails, when I am back to it!
Libre Grüße,
Florian
embedded"-thing is still somewhat
unclear to me, at least regarding kernel and firmware updates. I'd be more than
happy to get a hint towards an honest introduction to this topic.
Libre Grüße,
Florian
___
Dng mailing list
Dng@lists.dyne.org
https:/
On October 31, 2021 6:05:26 PM GMT+01:00, Steve Litt
wrote:
> Florian and Hendrik,
>
> Would either or both of you be able to give a presentation, on Mutt, at
> the GoLUG meeting this coming Wednesday, 7pm New York time?
Hallo Steve,
sorry for having to let you down: I am no
ote" switch. This should make it
possible to start a "second instance", regardless of an already running one
(and BTW enables you to have different FF profiles running next to each other).
Libre Grüße,
Florian
--
[message sent otg]
_
On October 30, 2021 12:07:35 AM GMT+02:00, Hendrik Boom
wrote:
> Turns out menu-clicking on the bar itself provides a menu
Haha, nice one! My most-given advice to mouse clickers eager to learn: Wherever
you are, use the /other/ button to check for context menus!
libre Grüße,
f.
--
hat this has
> already happened.
Love, light and libre Grüße!
Florian
--
[message sent otg]
___
Dng mailing list
Dng@lists.dyne.org
https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
ib/dpkg/lock' and then
try to fix the failed installation with the appropriate command ('dpkg
--configure -a' or 'dpkg --configure --pending') and then repeat the
upgrade procedure. At least this is what I used to do in such a case,
and I can't remember to have ever messed up anything
lib/systemd/system/sys-temd-agent.service.
AFAIK, the directory '/etc/init/' is only created/used by resp. for the
'upstart' init system, thus I assume that also (at least) those systems
are covered as well.
libre Grüße,
Florian
___
Dng mailing list
Dng@lists.dyne.org
https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
lected additional packages; if an in depth
maintenance is desired, there are the '--no-keeperfile' and
'-ignore-default-rules' options.
libre Grüße,
Florian
___
Dng mailing list
Dng@lists.dyne.org
https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
e +360 | xargs -l1 apt-file find | sort
libre Grüße,
Florian
___
Dng mailing list
Dng@lists.dyne.org
https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
On Thu, 25 Mar 2021 21:56:09 +0100
Florian Zieboll via Dng wrote:
> The upgrade of my still libsystemd-free desktop PC from Ascii to
> Chimaera ~2 weeks ago went so smooth that I forgot to mention it:
Of course this was an upgrade NOT from Ascii, but from _Beowulf_ to
Chimaera, seems
On Sun, 18 Apr 2021 11:37:58 +0200
Alessandro Vesely via Dng wrote:
> On Sat 17/Apr/2021 15:37:31 +0200 Florian Zieboll via Dng wrote:
> > On April 17, 2021 2:33:53 PM GMT+02:00, Alessandro Vesely via Dng
> > wrote:
> >>
> >> Is there a guide, a wiki, rel
should find it by searching the
subject lines for (most probably) the two release names. IIRC, I just did a
last dist-upgrade to be sure to have all the latest packages, then adapted the
sources.list and went 'apt update' - 'apt upgrade' - reboot - 'apt
dist-upgrade' - reboot.
libre Grüße,
Flori
On April 17, 2021 2:03:44 PM GMT+02:00, Hendrik Boom
wrote:
> Just curious -- what does apt update need the time and date for?
> Aren't the version numbes of the packages all it needs?
I'd guess that the correct time is required for signature verification.
libre Grüße,
F
night? [2] FUD is a bad mentor, so please stop spreading
it.
Told you so :-)
Libre Grüße,
Florian
[1] e.g. https://wiki.c2.com/?BodyFollowsEyes
[2] https://en.wiktionary.org/wiki/deer_in_the_headlights
___
Dng mailing list
Dng@lists.dyne.org
https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
On Fri, 26 Mar 2021 13:07:08 +0100
Alessandro Vesely via Dng wrote:
> Hi All,
>
> Debian is engaging in a disgusting attack against RMS:
Yesterday's mistfits -> today's opressors:
A warm welcome to autismophobia!
I hope we (as humanity) get this resolved, before the tide turns again
to hit
40 / upgrade: 49 / remove: 34)
$ apt dist-upgrade
(to install: 235 / upgrade: 325 / remove: 65)
$ reboot
$ apt autoremove
(to remove: 140)
Thumbs up and thank you for this great distro!
Florian
___
Dng mailing list
Dng@list
r host, but doesn't boot in the NUC.
Does the "other host" recognize it as bootable in UEFI mode? Did you
check for a BIOS update? Did you try with "Secure Boot" disabled?
libre Grüße,
Florian
___
Dng mailing list
Dng@lists.dyne.or
On Sun, 21 Mar 2021 22:33:27 + (GMT)
Jim Jackson wrote:
> well well well. Many thanks for that. And I thought I knew my way
> around alpine :-(
Glad I could help :-)
___
Dng mailing list
Dng@lists.dyne.org
On Sat, 20 Mar 2021 17:21:43 +0100
Florian Zieboll via Dng wrote:
> It's still about leaves hanging on the same ol' tree.
s/hanging/growing/ :-)
Cheerio,
Florian
___
Dng mailing list
Dng@lists.dyne.org
https://mailinglists.dyne.org/cgi-bin/mail
On Sat, 20 Mar 2021 11:15:50 -0400
Steve Litt wrote:
> Florian Zieboll via Dng said on Fri, 19 Mar 2021 13:18:04 +0100
>
> >On March 19, 2021 12:18:17 PM GMT+01:00, Florian Zieboll via Dng
> > wrote:
> >
> >> a sphere
> >
> >Or, lol, should I say: a
asted output, but I
had stopped reading exactly here:
|| On Tue, 16 Mar 2021 07:41:42 -0700
|| Marc Shapiro via Dng wrote:
||
|| > root@quixote:/home/marc# du -sc /path/to/mountpoint/
|| > du: cannot access '/path/to/mountpoint/': No such file or directory
|| > 0 total
On Fri, 19 Mar 2021 13:43:26 +0100
"Dr. Nikolaus Klepp" wrote:
> Anno domini 2021 Fri, 19 Mar 13:18:04 +0100
> Florian Zieboll via Dng scripsit:
> > On March 19, 2021 12:18:17 PM GMT+01:00, Florian Zieboll via Dng
> > wrote:
> >
> > > a sphere
&g
On Fri, 19 Mar 2021 15:00:09 +0100
aitor wrote:
> Do you guys still trust Cristóbal Colón?
Personally, I prefer Galilei to Columbus: "And yet it moves!"
BTW, it was a nice tour de Heidelberg with ~500 colorful bicyclist@s
and many friendly people at their windows :-)
Now, safe and sound,
On March 19, 2021 12:18:17 PM GMT+01:00, Florian Zieboll via Dng
wrote:
> a sphere
Or, lol, should I say: a curved plane?
With best regards from Flatland,
Florian
--
[message sent otg]
___
Dng mailing list
Dng@lists.dyne.org
ht
A friendly reminder: It's friday - for freedom, fun & future!
I suggest to consider this information so far off topic, that it hits the nail
on the head from behind. Still, our planet is a sphere!
libre Grüße :-)
--
[message sent otg]
___
Dng
On Wed, 17 Mar 2021 16:18:03 +0100
"Antonio Trkdz.tab" wrote:
> Thank you Florian for your good advice on pinning strategy.
> What I am really scared of is if having installed different gcc
> packages could screw up my system.
> Does your strategy take into account this, i
tech-notes/config.html#show-sort
libre Grüße,
Florian
___
Dng mailing list
Dng@lists.dyne.org
https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
On Wed, 17 Mar 2021 12:49:56 +0100
Florian Zieboll via Dng wrote:
> On Wed, 17 Mar 2021 12:00:19 +0100
> "Antonio Trkdz.tab via Dng" wrote:
>
> > Hello all,
> >
> > I could use some advice on a package pinning which I have set.
> > I need a version
y newly installed "custom" version and its dependencies. Updates
and dependencies get installed as usual and the packages from backports
will not be upgraded to chimaera:
Package: *
Pin: release n=beowulf-backports
Pin-Priority: 150
Just to doube check for "human error": Does the output of 'df' match with the
output of 'du -sc /path/to/mountpoint/'?
--
[message sent otg]
___
Dng mailing list
Dng@lists.dyne.org
https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
done so in order for you to review.
>
> Already looked in lost+found. Nothing there.
>
> Tried fsck. It says the partition is clean.
Did you "force" the fsck (with '-f'), or did you rely on the
filesystem's "marked as clean" flag?
libre Grüße,
Florian
ease accept one of my very favorite GIFs:
https://i.postimg.cc/Vvb9rpVp/1st-level-support.gif
libre Grüße,
Florian
--
"A map of the world that does not include Utopia
is not even worth glancing at."
Oscar Wilde
___
Dng mailing list
On Tue, 09 Mar 2021 23:02:11 +
g4sra via Dng wrote:
> ‐‐‐ Original Message ‐‐‐
> On Tuesday, March 9, 2021 4:00 PM, Florian Zieboll via Dng
> wrote:
>
> > On Tue, 09 Mar 2021 14:18:34 +
> > g4sra via Dng dng@lists.dyne.org wrote:
> >
>
;, but works for me: I connect to the DMZ'ed server
from the LAN using its external FQDN.
libre Grüße,
Florian
___
Dng mailing list
Dng@lists.dyne.org
https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
fter Kurosawa's "Rashomon" (1950) one the most important
films on my harddisk.
Just my two cheese cubes,
Florian cens⬛ré Caution
[1] https://www.quad9.net/support/faq
[2] https://www.switch.ch/news/quad9-moves-to-Switzerland/
[3] https://www.s-ge.com/en/article/news/20211-software-p
On Sat, 6 Mar 2021 12:45:41 +0100
Florian Zieboll via Dng wrote:
> On Sat, 6 Mar 2021 04:27:21 -0500
> Steve Litt wrote:
>
> > >I /had/ Jitsi Meet running (w/o local turn server and jigasi) on a
> > >Odroid XU-4 with 2GB RAM. Tested with up to four participants
1 - 100 of 393 matches
Mail list logo
