Hi Simon,
now i changed every interface-line to a listen-address-line. All is
working just fine :-D Including DHCP and DNS.
Perfect. Thank you !
Liebe Grüße aus Freilassing,
Michael Rack
RSM Freilassing
--
RSM Freilassing Tel.: +49 8654 607110
Nocksteinstr. 13
Am 14.05.2010 16:08, schrieb Simon Kelley:
Different versions of dnsmasq? I only looked at the latest code to see
how it would behave with repeated IP addresses, older code may break
differently
dnsmasq -v prints the same Version 2.52 *strange*
Michael Rack wrote:
Hi Simon!
I've installed dnsmasq to my new servers i bought. I copied all files
original as of the old server. But on startup i get this error message:
dnsmasq: unknown interface bond5
after removing bond5 i got the following error message:
dnsmasq: unknown interface
Michael Rack wrote:
I have in mind, that dnsmasq does not handle DHCP Requests if there is a
ip-address configured. I switched then to bind-interfaces...
you can use --interface without --bind-interfaces
But why is the same config not working as before?
DNSMAQ did not had problems on my old
Hi Simon!
I've installed dnsmasq to my new servers i bought. I copied all files
original as of the old server. But on startup i get this error message:
dnsmasq: unknown interface bond5
after removing bond5 i got the following error message:
dnsmasq: unknown interface bond4
after removing
On Thu, May 13, 2010 at 1:24 PM, Michael Rack
michael.r...@rsm-freilassing.de wrote:
Hi Simon!
I've installed dnsmasq to my new servers i bought. I copied all files
original as of the old server. But on startup i get this error message:
dnsmasq: unknown interface bond5
after removing bond5
The interfaces configuration was attached to my mail.
bond0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
inet addr:81.95.14.97 Bcast:81.95.14.99 Mask:255.255.255.252
UP BROADCAST RUNNING MASTER MULTICAST MTU:1460 Metric:1
RX packets:0 errors:0 dropped:0
