Gary,
John Kriner has the kit available from time
to time on Ebay. Contact him at [EMAIL PROTECTED] .
73, Gary
Hello to all,
Sometime ago I bought a small kit to change the 2
pin vox relay to a RCA
jack for keying. I have lost the email and im
wondering if you know of someone
that makes these little modifications precut to
install for the Drake L4B?
Any help is much appreciated.
Best to all,
I appreciate the response from
the reflector members.
(73) Les
---===WB6ORZ===---
Re the 6HS6 (actually two of
them) in my R4-A, there are no test settings called out in the TV-7 data Book.
Does anyone have these, perhaps developed by others over time. My recent visit
to EB5AGV's fine TV-7 site came up short.
Thanks in advance.
(73) Les
---===WB
Don,
If you do decide to autograph the rig, be sure its unplugged.
Good luck, George KB2Z
At 11:32 AM 8/14/05, you wrote:
My thanks to the all the list for all the help! I now have
the
8.050mhz bfo working! I can hear signals !!! (sort of)
So far I have completely replaced the 2nd
I
My thanks to the all the list
for all the help! I now have the
8.050mhz bfo working! I can hear signals !!!
(sort of)
So far I have completely replaced the
2nd IF/audio board and now
also with help here, have replaced the 3n204 on the
pbt board. and rebuilt
the s-meter.
Th
Paul,
There is a mod to relocate the wiring that
connects from the power supply board to the can filter capacitor outside of the
main harness and route them along the outside edge of the chassis
with heavier gage wire. This helps reduce the hum.
73, Gary
"Bob Henderson" <[EMAIL PROTECTED]> made an utterance to the drakelist gang
--
Many thanks to those who have written off reflector expressing interest and
offering encouragement.
The primary mystery is why the 6EJ7 1st mixer in t
8 matches
Mail list logo