Hi to all:
This question has to do with the antenna input for the Drake R-4C.
Has anyone tried bypassing the RF amp and feeding the antenna input
directly to the first mixer in the R-4C?
73,
Chuck___
Drakelist mailing list
Drakelist@zerobeat.net
Hi to all:Who was the manufacture and supplier of the Drake antenna tuner knobs
and amplifier knobs?73,Chuck___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
Hi to all Drake fans:
Do you think the Drake R-4C could be modified to accommodate one of these two
class A audio amps and the graphic equalizer?
At present I don't have the schematics for these products.
Here are the three links to look at:
Hi to all:Here is another link to possible class A tube/valve amps for Drake
R-4C.Do you think any of these little class A amps could be made to work in the
Drake?73,Chuck - AA5WG
http://shop.ebay.com/indeed-hi-fi-lab/m.html
___
Drakelist
Hi Curt:
Remove the balun and try again without the balun. Use low power to see if
there is a change. And, remove the balun and replace with a homebrew balun and
try again.
I did a test on 160 meters and the balun got so hot I could not touch it.
Balun damage is not restricted to 160
Hi to all the Drake Fans:
Hi Don. I too would like to know if anyone has modified the R-4C mixers?
Thank you.
Chuck - AA5WG
Cedar, Michigan
___
Drakelist mailing list
Drakelist@zerobeat.net
What is the preferred Digital readout system for the Drake C-line, (R-4C and
T-4XC)?
What system has the largest readout digits?
Thank you.
73,
Chuck - AA5WG
___
Drakelist mailing list
Drakelist@zerobeat.net
Hi Evan:
Adding a fan to the supply is a neat idea. Could you include a cleaning filter
to the fan, i.e foam insert maybe?
73,
Chuck - AA5WG
___
Drakelist mailing list
Drakelist@zerobeat.net
Evan - K9SQG:
I understand and what you say makes sense.
Thank you.
Chuck - AA5WG
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
Hi Evan - K9SQG:
Good luck with your cutting of phenolic. I look forward to seeing your nice
Drake supply work.
73,
Chuck - AA5WG
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
Hi to all:
I recommend using a diamond coated blade for your table saw to cut phenolic or
expoxy laminate boards. I cut this stuff allot and the diamond coated saw
blade is what works best for me. Remember too, phenolic and epoxy laminates
require special dust collection systems designed
Hi Evan and all Drake fans:
Sir, you are welcome. Upwind and outside seems like a good choice. Good luck
with your work.
73,
Chuck - AA5WG
___
Drakelist mailing list
Drakelist@zerobeat.net
Hi to all:
Can the Drake R7 receiver transceive with the Drake T-4XC transmitter?
Or, would I have to use the mute button on the R7 before transmitting?
73,
Chuck - AA5WG
___
Drakelist mailing list
Drakelist@zerobeat.net
Hi to all:
A couple of days ago there was a very loud crack, pop or bang then some
continuous crackling that came from the speaker. I was in the next room when
this happened.
At present, the receiver will not receive. The S-meter is pegged to the
right. When turning the radio on the
Hi to all:
After aligning the T4X-C the power output is equal when switching between R4-C
or T4X-C control via the transcieve switch on the transmitter.
Now, the output is lower when the transcieve switch is in the T4X-C position.
This is for 80 meters. I aligned the transmitter again and
Hi to all
My T4X-C always put out about 110 -120 watts, less on 20 - 10 meters. On 40
meters there was always RFI problems with our organ.
Today, the T4X-C was putting out 150 watts on 80 meters. All the other bands
had much more output power too. Amp meter said 400 - 450 mills. 320 - 350
between RCVR and XMTR.
Why is this?
Any suggestions on how to obtain uniformity in received signal strengths on all
bands when switching between RCVR and XMTR via T4X-C transceive switch?
73,
Chuck Pool - AA5WG
___
Drakelist mailing list
Hi to all:
Does anyone know of successful mixer and RF amp mods for the R4C?
Thank you.
Chuck Pool - AA5WG
Cedar, Michigan
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
of multiplication
Thank you for all:
73,
Chuck Pool - AA5WG
Cedar, Michigan
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
Hi to all:
This is a T4X-C question. I have a C-Line and I am giving the T-4XC an
alignment (R-4C too).
(1) 80 meters challenge: 80 meters has lower output than all the other
bands. I noticed three of the four alignment trimmer capacitors on the left
side of radio (T-4XC) are
20 matches
Mail list logo