Ken, WA2LBI [EMAIL PROTECTED] made an utterance to the drakelist gang
--
Seth,
If the T-4XC works with the R-4C PTO controlling transceive but does
not work with the T-4XC internal PTO then I would check the output of
the T
Ken, WA2LBI [EMAIL PROTECTED] made an utterance to the drakelist gang
--
Jim,
Regardless of how you got there it's good to hear you are back in business!
Ken, WA2LBI
Quoting Jim Zellmer [EMAIL PROTECTED]:
Ken,
TNX
Ken, WA2LBI [EMAIL PROTECTED] made an utterance to the drakelist gang
--
Jim,
I have also run into this problem. The 5595 KC oscillator in the R-4B
would not make frequency so it couldn't match the transmitter. The
piston
Ken, WA2LBI [EMAIL PROTECTED] made an utterance to the drakelist gang
--
George,
The 2 pin plug is almost unobtainium. Those of us who have even one
more than we need are VERY unwilling to part with it (them
Ken, WA2LBI [EMAIL PROTECTED] made an utterance to the drakelist gang
--
Jerry,
Maybe I missed it, what model Drake do you have?
Ken, WA2LBI
Quoting Jerry M Judy [EMAIL PROTECTED]:
I need help with a drake question
Ken, WA2LBI [EMAIL PROTECTED] made an utterance to the drakelist gang
--
George,
Before you break out the arsenal of test gear try removing all the
interconnecting cables and cleaning the connectors. You may have developed
some
Ken, WA2LBI [EMAIL PROTECTED] made an utterance to the drakelist gang
--
Sure you can build a kluge box, I have something similar for the test bench.
For the station, however, I standardized on the Kenwood 4 pin mic wiring scheme
Ken, WA2LBI [EMAIL PROTECTED] made an utterance to the drakelist gang
--
Paul,
Do you have the 75S-1 in STBY or OPR? I believe it has to be in STBY for the
mute line of the TR-4 to control the mute function of the Collins.
Ken
Ken, WA2LBI [EMAIL PROTECTED] made an utterence to the drakelist gang
--
Eric,
IIRC, the INJ cable has phono connectors with a white insulation.
Ken, WA2LBI
Quoting Eric Webner [EMAIL PROTECTED]:
My entire set of cables
Ken, WA2LBI [EMAIL PROTECTED] made an utterence to the drakelist gang
--
Eric,
Jan Crystals has all the information to make the Drake crystals. Call the
number on the web site and tell them what you frequency want. Once I had
values in the vicinity of
the RF gain control?
Ken, WA2LBI
Quoting George [EMAIL PROTECTED]:
Hi all
went through it and found the transistor on the agc board was loose
resoldered and went to readjust the bias and s meter. I turned the
rf gain fully counterclockwise and it would not move the s
. If the foot also has a
solder lug be sure to cut it off so you won't be tempted to use it. You can
also cut off the lugs of the defective can capacitor to give you more room
under the chassis for mounting the new, smaller replacement caps.
Ken, WA2LBI
[EMAIL PROTECTED]
Quoting Al Parker [EMAIL PROTECTED
to be inoperative for unknown reasons and still
require troubleshooting. What is the going price for a working TR-4 in good
condition, maybe $300?
Thanks for any and all assistance and/or advice.
Ken, WA2LBI
[EMAIL PROTECTED
want for it/them. If you want pieces or the entire rig send me a note
detailing what you want. It may help me decide which way to go! To be fair, if
I decide to sell either parts or the entire rig I will respond to the e-mails
in the order received.
Thanks,
Ken, WA2LBI
[EMAIL PROTECTED
sense for me
to repair the rig. If that is the case I may part out the pieces or offer the
rig as a parts donor.
Your advise is appreciated.
Ken, WA2LBI
[EMAIL PROTECTED]
--
Submissions:[EMAIL PROTECTED]
Subscribe
15 matches
Mail list logo