Please contact me off-list for particulars re price and shipping.

I've got some nice B-Twins finally available.  It has been busy enough here 
with career-changing that it has taken me 'til now to have these rigs ready 
since I first announced them in Oct.  Pics that are better than iPhone snaps 
will be done later today.

T-4XB, s/n in 20xxx range, full output, recently re-neutralized and balanced.  
Nice chassis with minimal "freckles".  One feed-through cap was damaged and 
repaired by a previous owner.

R-4B, s/n in the 13xxx range, nice chassis, it is discolored around the fuse 
but not corroded.  Nice, unrestored receiver that required minimal tweaking.  
Three accessory crystals for 30, 11 (!) and 10CW.  Yeah, there were some extra 
11m rocks laying around, though this one already had this one when I bought it.

AC-4 in good working order, s/n in 46xxx range.  I replaced both caps in the 
bias circuit as a preventive measure.  Other caps are original and working fine 
(as were the original bias caps, but they've been completely disconnected from 
the circuit and the new, smaller caps installed underneath).  

MS-4, no dents, speaker works fine, looks like a repaint and there are some 
scuffs on the front.

I'll sell these as a set or individually.  I'll also install a Heathkit Shop or 
Hayseed kit in the AC-4 for a nominal charge above the kit cost if you want.  I 
understand most folks on this list do their own work and there's nothing wrong 
with the power supply.

>From past experience, shipping weights and sizes are:

R-4B, 21 lbs, 20.5 x 20.5 x 13.5 in.
T-4XB, 18 lbs, same size as R-4B.
AC-4, 18 lbs., 14 x 8 x 8 in.
MS-4m 8 lbs, same size as xmitter and receiver.

Shipping from 27302 (NC).

73,

Steve Wedge, W1ES/4

Time flies like an arrow; fruit flies like a banana.


All my computers have my signature with various pearls of wisdom appended 
thereto.
_______________________________________________
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist

Reply via email to