arey Barrell" <[EMAIL PROTECTED]>
To: "Tim Kass" <[EMAIL PROTECTED]>, <[EMAIL PROTECTED]>,
<[EMAIL PROTECTED]>
Subject: Re: [Drakelist] Drake T4X Microphone Question
Date: Thu, 3 Apr 2003 22:26:26 -0500
There is an interesting article in Electric Rad
improves
> audio
>> response...got this from Jack Geihl WB8BFS ...73 Tim K8WBL
>>
>> >From: "William J. Bennett" <[EMAIL PROTECTED]>
>> >Reply-To: "William J. Bennett" <[EMAIL PROTECTED]>
>> >To: "Drake List Server" <
t;From: "William J. Bennett" <[EMAIL PROTECTED]>
> >Reply-To: "William J. Bennett" <[EMAIL PROTECTED]>
> >To: "Drake List Server" <[EMAIL PROTECTED]>
> >Subject: [Drakelist] Drake T4X Microphone Question
> >Date: Thu, 3 Apr 2
: "William J. Bennett" <[EMAIL PROTECTED]>
Reply-To: "William J. Bennett" <[EMAIL PROTECTED]>
To: "Drake List Server" <[EMAIL PROTECTED]>
Subject: [Drakelist] Drake T4X Microphone Question
Date: Thu, 3 Apr 2003 07:54:55 -0500
I would like to use a D104
-BEGIN PGP SIGNED MESSAGE-
On Thu, 3 Apr 2003 07:54:55 -0500, William J. Bennett wrote:
>
>I would like to use a D104 with my T4XC. I purchased a HI impedance
>xformer from Hiel but I'm not sure of the pin out of the D104 (red,
>white, shield) and how to wire the transformer between th
Actually the base with the preamp will also drive a hi-Z input just
fine. Whether you bypass the preamp or not is a matter of choice.
Astatic says that the preamp improves the flatness of the output of
the microphone by eliminating the effect of the variation in
termination impedance from transmi
You didn't say if it was a D-104 with or without a preamp in the base of
the stand. The D-104 w/o preamp is a high impedance mic and therefore
doesn't need a transformer. The D-104 with a preamp in the stand has a low
impedance output but the preamp should be bypassed since it isn't needed
in this
Bill -
You don't need a transformer
Wire color codes vary, but _usually_ microphones are wired so that
the shield goes to the "sleeve" of the connector, white goes to the
"tip" (PTT switch), and red goes to the "ring" (microphone).
Schematics are at:
http://bama.sbc.edu/astatic.htm
Eas
I would like to use a D104 with my T4XC. I purchased a HI impedance
xformer from Hiel but I'm not sure of the pin out of the D104 (red,
white, shield) and how to wire the transformer between the T4X and
the D-104. Does anyone have any experience using a D-104 with a Drake
transmitter?
TIA
Bil
9 matches
Mail list logo
