Tune up Drake B Line.
Pre tune using spot settings. Fine tune on antenna with about 10 watts.
Not all the time but some time when peaking the pre-selector on the
receiver the output will drop suddenly or increase suddenly to 40 watts. The
output on the Drake MN 2000 watt meter will show
**
- Original Message -
From: fjmel...@aol.com
To: drakelist@zerobeat.net
Sent: Monday, December 27, 2010 11:13 PM
Subject: Re: [Drakelist] Drakelist Digest New Thread
Any advise about replacing the existing RCA cables
Any advise about replacing the existing RCA cables on a pair of Drake B
line twins. Can the cables be replaced with a good quality Audio/Video
cables? Is the cable length important? Not talking about the injection cable
just
the other 3 cables.
Thanks
Fred WD8ADG
On Mon, 27 Dec 2010 23:13:41 EST, fjmel...@aol.com wrote:
Any advise about replacing the existing RCA cables on a pair of Drake B
line twins. Can the cables be replaced with a good quality Audio/Video
cables? Is the cable length important? Not talking about the injection cable
just
the
] Drakelist Digest, New thread Best way to reduce drive
to amp.
Using a Drake B line. What is the best way to reduce the drive to the Amp.?
Reduce mic. gain or reduce transmitter output of by using the preselector?
How do you do it?
Thanks
73 de Fred WD8ADG
Fred -
It depends upon 'how much' reduction you need. If having the LOAD
control at minimum (0) and turning the GAIN down to no less than 9
o'clock is still too much power, then you may need additional
reduction. The BEST way is to reduce the Screen voltage on the PA, but
this is not
Using a Drake B line. What is the best way to reduce the drive to the
Amp.? Reduce mic. gain or reduce transmitter output of by using the
preselector?
How do you do it?
Thanks
73 de Fred WD8ADG
___
Drakelist mailing list
7 matches
Mail list logo