Hi All;
I 'fished" this xmtr out of my closet, been there for years.
I borrowed a supply from a friend and was bringing it up on a variac when at around 80vac or so, the supply started to Hum/vibrate.
All was in standby or NON-x Mode, so there was it was not in xmit that I know of.
I was thinking there was a short or something in the T-4XB, besides my friend was concerned for his supply, so we stopped!
So I decided, rather then fool around with it & make it worst, was to sell it to someone who needs a project.
I did remove the covers to look around, all was intact & complete except for the last picture of a small Circuit board next to these 3 white power resistors.
The Wire wound Choke(?) is split, a few wires on the board are discolored(where hot?).
Anyway, the cabinet has a few minor scratches on top, there is one area on the side & bottom where paint came off because of Tape. Where do people put tape on thier gear, argh!
Bottom has correct feet, all screws are there.
All correct knobs, Front panel is in Very good condition.
The meter is ok, a vom check "made the pointer move test"!
I'd hate to tear it apart & sell it in pieces, so someone rescue it pse, hi!
I would like to get $150.0PPD.
Pics:
http://www.myradioroom.com/t-4xb1.jpg
http://www.myradioroom.com/t-4xb2.jpg
http://www.myradioroom.com/t-4xb3.jpg
http://www.myradioroom.com/t-4xb4.jpg
http://www.myradioroom.com/t-4xb5.jpg
http://www.myradioroom.com/t-4xb6.jpg
http://www.myradioroom.com/t-4xb7.jpg
http://www.myradioroom.com/t-4xb8.jpg
Tnx & 73...
Rich WA2RQY
- [drakelist] FS: Drake T-4XB Xmtr with 8 pics, Needs TLC?>>... RLucch2098
