Yannis,
On Sun, Feb 3, 2019 at 9:39 PM Yannis Milios
wrote:
>
> Are you saying this needs to be done for every single resource potentially
>> hundreds of vm's with multiple disks attached? This sounds like a huge pita.
>>
>
> Yes. However, I did a test. I temporarily reduced redundancy level in
> Are you saying this needs to be done for every single resource potentially
> hundreds of vm's with multiple disks attached? This sounds like a huge pita.
>
Yes. However, I did a test. I temporarily reduced redundancy level in
/etc/pve/storage.cfg and the created a new VM in PVE.
Then I added th
On Sun, 3 Feb 2019 3:42 am Yannis Milios You have to specify which storage pool to use for the resource, otherwise
> it will default to 'DfltStorPool', which does not exist. So that would be
> something like this...
>
> $ linstor resource create pve3 vm-400-disk-1 --storage-pool
>
>
> It might be
You have to specify which storage pool to use for the resource, otherwise
it will default to 'DfltStorPool', which does not exist. So that would be
something like this...
$ linstor resource create pve3 vm-400-disk-1 --storage-pool
It might be also wise to check and compare the settings of the r
Hi,
I manage a Proxmox cluster with Linstro storage.
At the beginning, this Proxmox cluster was composed by 3 nodes: 2 with Linstor
and 1 (a lighter server) just to do the qorum job.
So, LINSTOR storage was composed of 2 Linstor satellites and a controller (in a
VM).
I need to increase ressource
