Hi Paul,
> Am 26.10.2021 um 20:12 schrieb Paul Cercueil :
>
> Hi,
>
> I resend the V3 of my patchset for drm/ingenic, verbatim.
>
> The previous submission of my V3 received a lot of replies, but none of
> these replies were actually talking about the patches themselves.
Indeed. And since we
. Nikolaus Schaller
---
drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 85 +--
drivers/gpu/drm/ingenic/ingenic-drm.h | 42 +++
2 files changed, 122 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
b/drivers/gpu/drm/ingenic/ingenic
From: Paul Boddie
We need to hook up
* HDMI connector
* HDMI power regulator
* DDC pinmux
* HDMI and LCDC endpoint connections
Signed-off-by: Paul Boddie
Signed-off-by: H. Nikolaus Schaller
---
arch/mips/boot/dts/ingenic/ci20.dts | 67 +
1 file changed, 67
From: Paul Boddie
A specialisation of the generic Synopsys HDMI driver is employed for JZ4780
HDMI support. This requires a new driver, plus device tree and configuration
modifications.
Signed-off-by: Paul Boddie
Signed-off-by: H. Nikolaus Schaller
---
arch/mips/boot/dts/ingenic/jz4780.dtsi
From: Sam Ravnborg
Add DT bindings for the hdmi driver for the Ingenic JZ4780 SoC.
Based on .txt binding from Zubair Lutfullah Kakakhel
Signed-off-by: Sam Ravnborg
Signed-off-by: H. Nikolaus Schaller
Cc: Rob Herring
Cc: devicet...@vger.kernel.org
---
.../bindings/display/ingenic-jz4780
Enable CONFIG options as modules.
Signed-off-by: Ezequiel Garcia
Signed-off-by: H. Nikolaus Schaller
---
arch/mips/configs/ci20_defconfig | 6 ++
1 file changed, 6 insertions(+)
diff --git a/arch/mips/configs/ci20_defconfig b/arch/mips/configs/ci20_defconfig
index ab7ebb066834
From: Paul Boddie
A specialisation of the generic Synopsys HDMI driver is employed for JZ4780
HDMI support. This requires a new driver, plus device tree and configuration
modifications.
Signed-off-by: Paul Boddie
Signed-off-by: Ezequiel Garcia
Signed-off-by: H. Nikolaus Schaller
---
drivers
From: Paul Boddie
If ingenic drm driver can not be registered, the IPU driver won't be
deregistered.
Code structure is chosen in preparation to add hdmi unregistration
in error case following the same pattern by a later patch.
Signed-off-by: Paul Boddie
Signed-off-by: H. Nikolaus Schaller
tch warnings
- rebased on v5.14-rc4
- include (failed, hence RFC 8/8) attempt to convert to component framework
(was suggested by Paul Cercueil a while ago)
H. Nikolaus Schaller (1):
MIPS: defconfig: CI20: configure for DRM_DW_HDMI_JZ4780
Paul Boddie (5):
drm/ingenic: Fix drm_init error
Hi Paul,
> Am 29.09.2021 um 16:30 schrieb Paul Cercueil :
>
> Hi,
>
> Le mar., sept. 28 2021 at 14:06:03 +0200, H. Nikolaus Schaller
> a écrit :
>> Hi Paul,
>>> Am 28.09.2021 um 12:21 schrieb H. Nikolaus Schaller :
>>>>> @@ -1492
Hi Paul,
> Am 28.09.2021 um 14:06 schrieb H. Nikolaus Schaller :
>
> Hi Paul,
>
>> Am 28.09.2021 um 12:21 schrieb H. Nikolaus Schaller :
>>
>>>> @@ -1492,10 +1555,16 @@ static int ingenic_drm_init(void)
>>>> {
>>>>
Hi Neil,
> Am 28.09.2021 um 15:02 schrieb Neil Armstrong :
>
> On 27/09/2021 18:44, H. Nikolaus Schaller wrote:
>> From: Paul Boddie
>>
>> A specialisation of the generic Synopsys HDMI driver is employed for JZ4780
>> HDMI support. This requir
Hi Paul,
> Am 28.09.2021 um 12:21 schrieb H. Nikolaus Schaller :
>
>>> @@ -1492,10 +1555,16 @@ static int ingenic_drm_init(void)
>>> {
>>> int err;
>>> + if (IS_ENABLED(CONFIG_DRM_INGENIC_DW_HDMI)) {
>>> + err =
> Am 28.09.2021 um 12:06 schrieb H. Nikolaus Schaller :
>
>>>
>>> +
>>> + /* RGB output control may be superfluous. */
>>> + if (soc_info->has_rgbc)
>>> + regmap_write(priv->map, JZ_REG_LCD_RGBC,
&
Hi,
> Am 28.09.2021 um 11:35 schrieb Paul Cercueil :
>
> Hi Nikolaus / Paul,
>
> Le lun., sept. 27 2021 at 18:44:20 +0200, H. Nikolaus Schaller
> a écrit :
>> From: Paul Boddie
>> Add support for the LCD controller present on JZ4780 SoCs.
>> This SoC
Hi Paul,
> Am 28.09.2021 um 11:58 schrieb Paul Cercueil :
>
> Hi,
>
> Le lun., sept. 27 2021 at 18:44:28 +0200, H. Nikolaus Schaller
> a écrit :
>> From: Paul Boddie
>> The jz4780 has some features which need initialization
>> according to the vendor k
> Am 28.09.2021 um 11:18 schrieb Maxime Ripard :
>
> On Tue, Sep 28, 2021 at 10:59:45AM +0200, H. Nikolaus Schaller wrote:
>>>> +properties:
>>>> + compatible:
>>>> +items:
>>>> + - const: ingenic,jz4780-dw-hdmi
>>
Hi,
> Am 27.09.2021 um 19:07 schrieb max...@cerno.tech:
>
> Hi,
>
> On Mon, Sep 27, 2021 at 06:44:21PM +0200, H. Nikolaus Schaller wrote:
>> From: Sam Ravnborg
>>
>> Add DT bindings for the hdmi driver for the Ingenic JZ4780 SoC.
>> Based on .txt
> Am 27.09.2021 um 19:08 schrieb Maxime Ripard :
>
> On Mon, Sep 27, 2021 at 06:44:24PM +0200, H. Nikolaus Schaller wrote:
>> From: Paul Boddie
>>
>> A specialisation of the generic Synopsys HDMI driver is employed for JZ4780
>> HDMI support. This requir
> Am 27.09.2021 um 19:00 schrieb Maxime Ripard :
>
> Hi,
>
> On Mon, Sep 27, 2021 at 06:44:23PM +0200, H. Nikolaus Schaller wrote:
>> It appears that dw-hdmi plugin detection is not properly
>> propagated unless we call drm_kms_helper_hotplug_event().
>>
>
From: Paul Boddie
A specialisation of the generic Synopsys HDMI driver is employed for JZ4780
HDMI support. This requires a new driver, plus device tree and configuration
modifications.
Signed-off-by: Paul Boddie
Signed-off-by: Ezequiel Garcia
Signed-off-by: H. Nikolaus Schaller
---
drivers
From: Paul Boddie
The platform-specific configuration structure is augmented with
mode_fixup and timings members so that specialisations of the
Synopsys driver can introduce mode flags and bus flags.
Signed-off-by: Paul Boddie
Signed-off-by: Ezequiel Garcia
Signed-off-by: H. Nikolaus Schaller
From: Paul Boddie
A specialisation of the generic Synopsys HDMI driver is employed for JZ4780
HDMI support. This requires a new driver, plus device tree and configuration
modifications.
Signed-off-by: Paul Boddie
Signed-off-by: H. Nikolaus Schaller
---
arch/mips/boot/dts/ingenic/jz4780.dtsi
Enable CONFIG options as modules.
Signed-off-by: Ezequiel Garcia
Signed-off-by: H. Nikolaus Schaller
---
arch/mips/configs/ci20_defconfig | 6 ++
1 file changed, 6 insertions(+)
diff --git a/arch/mips/configs/ci20_defconfig b/arch/mips/configs/ci20_defconfig
index ab7ebb066834
checkpatch warnings
- rebased on v5.14-rc4
- include (failed, hence RFC 8/8) attempt to convert to component framework
(was suggested by Paul Cercueil a while ago)
H. Nikolaus Schaller (2):
drm/bridge: synopsis: Fix to properly handle HPD
MIPS: defconfig: CI20: configure for DRM_DW_HDMI_JZ
From: Paul Boddie
The jz4780 has some features which need initialization
according to the vendor kernel.
Signed-off-by: Paul Boddie
Signed-off-by: H. Nikolaus Schaller
---
drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 39 +++
1 file changed, 39 insertions(+)
diff --git
From: Paul Boddie
We need to hook up
* HDMI connector
* HDMI power regulator
* DDC pinmux
* HDMI and LCDC endpoint connections
Signed-off-by: Paul Boddie
Signed-off-by: H. Nikolaus Schaller
---
arch/mips/boot/dts/ingenic/ci20.dts | 67 +
1 file changed, 67
It appears that dw-hdmi plugin detection is not properly
propagated unless we call drm_kms_helper_hotplug_event().
Maybe drm_bridge_hpd_notify should have been setup to
call this.
Signed-off-by: H. Nikolaus Schaller
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 2 ++
1 file changed, 2
From: Sam Ravnborg
Add DT bindings for the hdmi driver for the Ingenic JZ4780 SoC.
Based on .txt binding from Zubair Lutfullah Kakakhel
Signed-off-by: Sam Ravnborg
Signed-off-by: H. Nikolaus Schaller
Cc: Rob Herring
Cc: devicet...@vger.kernel.org
---
.../bindings/display/ingenic-jz4780
From: Paul Boddie
If ingenic drm driver can not be registered, the IPU driver won't be
deregistered.
Code structure is chosen in preparation to add hdmi unregistration
in error case following the same pattern by a later patch.
Signed-off-by: Paul Boddie
Signed-off-by: H. Nikolaus Schaller
. Nikolaus Schaller
---
drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 85 +--
drivers/gpu/drm/ingenic/ingenic-drm.h | 42 +++
2 files changed, 122 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
b/drivers/gpu/drm/ingenic/ingenic
Hi Paul,
> Am 25.09.2021 um 21:39 schrieb Paul Cercueil :
>
>
>
> Le sam., sept. 25 2021 at 21:26:42 +0200, H. Nikolaus Schaller
> a écrit :
>> Hi Paul,
>>> Am 25.09.2021 um 21:08 schrieb Paul Cercueil :
>>> Hi Paul & Nikolaus,
>>&g
Hi Paul,
> Am 25.09.2021 um 21:08 schrieb Paul Cercueil :
>
> Hi Paul & Nikolaus,
>
> If you spent some time debugging the issue
we did ...
> instead of complaining that my patchset breaks things...
... we did have a working version (without hdmi-connector)
and bisect pointed at your
Hi Paul,
> Am 23.09.2021 um 22:23 schrieb H. Nikolaus Schaller :
>
>
>> Because your "it doesn't work" arguments have zero weight otherwise.
>
> I hope I still can find it. So I can't promise anything.
> We have had it complete in DTS and added code to pars
Hi Paul,
> Am 23.09.2021 um 21:39 schrieb Paul Cercueil :
>
>
>
> Le jeu., sept. 23 2021 at 20:52:23 +0200, H. Nikolaus Schaller
> a écrit :
>> Hi Paul,
>>> Am 23.09.2021 um 15:30 schrieb Paul Cercueil :
>>> Hi Nikolaus,
>>> Le jeu., se
Hi Paul,
> Am 23.09.2021 um 15:30 schrieb Paul Cercueil :
>
> Hi Nikolaus,
>
> Le jeu., sept. 23 2021 at 13:41:28 +0200, H. Nikolaus Schaller
> a écrit :
>> Hi Laurent,
>> Ah, ok.
>> But then we still have issues.
>> Firstly I woul
Hi Laurent,
> IMHO it is leaving (mature) dw-hdmi untouched and make attachment of a
> connector
> in ingenic_drm_bind() depend on some condition.
Since I don't know details of the DRM bridge/encoder/connector APIs),
let me reformulate the quersion for a condition specifically.
How can one
Hi Laurent,
> Am 23.09.2021 um 12:03 schrieb Laurent Pinchart
> :
>
> Hi Nikolaus,
>
> On Thu, Sep 23, 2021 at 11:55:56AM +0200, H. Nikolaus Schaller wrote:
>>> Am 23.09.2021 um 11:27 schrieb Laurent Pinchart:
>>> On Thu, Sep 23, 2021 at 11:19:23
Hi Laurent,
> Am 23.09.2021 um 11:27 schrieb Laurent Pinchart
> :
>
> Hi Nikolaus,
>
> On Thu, Sep 23, 2021 at 11:19:23AM +0200, H. Nikolaus Schaller wrote:
>>
>>>>> + ret = d
Hi Paul,
> Am 23.09.2021 um 10:49 schrieb Paul Cercueil :
>
> Hi Nikolaus,
>
> Le jeu., sept. 23 2021 at 07:52:08 +0200, H. Nikolaus Schaller
> a écrit :
>> Hi Paul,
>> thanks for another update.
>> We have been delayed to rework the CI20 HDMI code on to
Hi Paul,
thanks for another update.
We have been delayed to rework the CI20 HDMI code on top of your series
but it basically works in some situations. There is for example a problem
if the EDID reports DRM_COLOR_FORMAT_YCRCB422 but it appears to be outside
of your series.
The only issue we have
b H. Nikolaus Schaller :
>
>
>
>> Am 08.08.2021 um 21:06 schrieb H. Nikolaus Schaller :
>>
>>
>>
>>> Am 08.08.2021 um 21:04 schrieb Paul Cercueil :
>>>
>>> Hi Nikolaus,
>>>
>>> Le dim., août 8 2021 at 20:57:09 +0200, H. Nik
> Am 08.08.2021 um 21:06 schrieb H. Nikolaus Schaller :
>
>
>
>> Am 08.08.2021 um 21:04 schrieb Paul Cercueil :
>>
>> Hi Nikolaus,
>>
>> Le dim., août 8 2021 at 20:57:09 +0200, H. Nikolaus Schaller
>> a écrit :
>>> Hi Paul,
>
> Am 08.08.2021 um 21:04 schrieb Paul Cercueil :
>
> Hi Nikolaus,
>
> Le dim., août 8 2021 at 20:57:09 +0200, H. Nikolaus Schaller
> a écrit :
>> Hi Paul,
>> all other patches apply cleanly but this one fails on top of v5.14-rc4.
>> What base are you
Hi Paul,
all other patches apply cleanly but this one fails on top of v5.14-rc4.
What base are you using?
BR and thanks,
Nikolaus
> Am 08.08.2021 um 15:45 schrieb Paul Cercueil :
>
> Attach a top-level bridge to each encoder, which will be used for
> negociating the bus format and flags.
>
>
From: Paul Boddie
The jz4780 has some features which need initialization
according to the vendor kernel.
Signed-off-by: Paul Boddie
Signed-off-by: H. Nikolaus Schaller
---
drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 39 +++
1 file changed, 39 insertions(+)
diff --git
From: Paul Boddie
We need to hook up
* HDMI power regulator
* HDMI connector
* DDC pinmux
* HDMI and LCD endpoint connections
Signed-off-by: Paul Boddie
Signed-off-by: H. Nikolaus Schaller
---
arch/mips/boot/dts/ingenic/ci20.dts | 64 +
1 file changed, 64
From: Paul Boddie
A specialisation of the generic Synopsys HDMI driver is employed for JZ4780
HDMI support. This requires a new driver, plus device tree and configuration
modifications.
Signed-off-by: Paul Boddie
Signed-off-by: H. Nikolaus Schaller
---
arch/mips/boot/dts/ingenic/jz4780.dtsi
Enable CONFIG options as modules.
Signed-off-by: Ezequiel Garcia
Signed-off-by: H. Nikolaus Schaller
---
arch/mips/configs/ci20_defconfig | 7 +++
1 file changed, 7 insertions(+)
diff --git a/arch/mips/configs/ci20_defconfig b/arch/mips/configs/ci20_defconfig
index ab7ebb0668340
From: Paul Boddie
The platform-specific configuration structure is augmented with
mode_fixup and timings members so that specialisations of the
Synopsys driver can introduce mode flags and bus flags.
Signed-off-by: Paul Boddie
Signed-off-by: Ezequiel Garcia
Signed-off-by: H. Nikolaus Schaller
. As soon as the overlay plane is enabled
things go south :P
Tested on MIPS Creator CI20 board.
Signed-off-by: Paul Boddie
Signed-off-by: Ezequiel Garcia
Signed-off-by: H. Nikolaus Schaller
---
drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 119 +++---
drivers/gpu/drm/ingenic
From: Sam Ravnborg
Add DT bindings for the hdmi driver for the Ingenic JZ4780 SoC.
Based on .txt binding from Zubair Lutfullah Kakakhel
Signed-off-by: Sam Ravnborg
Signed-off-by: H. Nikolaus Schaller
Cc: Rob Herring
Cc: devicet...@vger.kernel.org
---
.../bindings/display/ingenic-jz4780
From: Paul Boddie
A specialisation of the generic Synopsys HDMI driver is employed for JZ4780
HDMI support. This requires a new driver, plus device tree and configuration
modifications.
Signed-off-by: Paul Boddie
Signed-off-by: Ezequiel Garcia
Signed-off-by: H. Nikolaus Schaller
---
drivers
messages revisited for checkpatch warnings
- rebased on v5.14-rc4
- include (failed, hence RFC 8/8) attempt to convert to component framework
(was suggested by Paul Cercueil a while ago)
H. Nikolaus Schaller (1):
MIPS: CI20: defconfig: configure for DRM_DW_HDMI_JZ4780
Paul Boddie (7):
drm/ingenic
From: Paul Boddie
Code structure is in preparation to add hdmi unregistration in error case
following the same pattern.
Signed-off-by: Paul Boddie
Signed-off-by: H. Nikolaus Schaller
---
drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 11 ++-
1 file changed, 10 insertions(+), 1 deletion
Hi Paul,
we have v3 ready and I'll post soon.
Before, here are some feedback to your comments.
> Am 05.08.2021 um 17:22 schrieb Paul Cercueil :
>
> Hi Nikolaus & Paul,
>> +
>> +if (priv->soc_info->hwdesc_size == sizeof(struct
>> ingenic_dma_hwdesc_ext)) {
>
> I'd prefer a boolean
Hi Robert,
> Am 05.08.2021 um 16:32 schrieb Robert Foss :
>
> Hey Nikolaus,
>
> Thanks for submitting this series.
>
> On Thu, 5 Aug 2021 at 16:08, H. Nikolaus Schaller wrote:
>>
>> From: Paul Boddie
>>
>> static void dw_h
Hi Paul,
> Am 05.08.2021 um 18:17 schrieb Paul Cercueil :
>
> Hi Nikolaus and Laurent,
>
> Le jeu., août 5 2021 at 18:07:20 +0200, H. Nikolaus Schaller
> a écrit :
>> Hi Laurent,
>>> Am 05.08.2021 um 17:04 schrieb Laurent Pinchart
>>> :
&g
Hi Laurent,
> Am 05.08.2021 um 17:04 schrieb Laurent Pinchart
> :
>
> Hi Nikolaus,
>
> Thank you for the patch.
>
> On Thu, Aug 05, 2021 at 04:07:57PM +0200, H. Nikolaus Schaller wrote:
>> This patch attempts to convert the ingenic-dw-hdmi driver
>> in
Hi Paul,
> Am 05.08.2021 um 17:22 schrieb Paul Cercueil :
>
> Hi Nikolaus & Paul,
>
> Le jeu., août 5 2021 at 16:07:52 +0200, H. Nikolaus Schaller
> a écrit :
>> From: Paul Boddie
>> Add support for the LCD controller present on JZ4780 SoCs.
>> This
Hi Robert,
> Am 05.08.2021 um 16:32 schrieb Robert Foss :
>
> Hey Nikolaus,
>
> Thanks for submitting this series.
>
> On Thu, 5 Aug 2021 at 16:08, H. Nikolaus Schaller wrote:
>>
>> From: Paul Boddie
>>
>> + .mode_fixup = dw_hdmi_
This series adds HDMI support for JZ4780 and CI20 board
V2:
- code and commit messages revisited for checkpatch warnings
- rebased on v5.14-rc4
- include (failed, hence RFC 8/8) attempt to convert to component framework
(was suggested by Paul Cercueil a while ago)
H. Nikolaus Schaller (2
From: Paul Boddie
We need to hook up
* HDMI power regulator
* HDMI connector
* DDC pinmux
* HDMI and LCD endpoint connections
Signed-off-by: Paul Boddie
Signed-off-by: H. Nikolaus Schaller
---
arch/mips/boot/dts/ingenic/ci20.dts | 64 +
1 file changed, 64
From: Sam Ravnborg
Add DT bindings for the hdmi driver for the Ingenic JZ4780 SoC.
Based on .txt binding from Zubair Lutfullah Kakakhel
Signed-off-by: Sam Ravnborg
Signed-off-by: H. Nikolaus Schaller
Cc: Rob Herring
Cc: devicet...@vger.kernel.org
---
.../bindings/display/ingenic-jz4780
From: Paul Boddie
The platform-specific configuration structure is augmented with
mode_fixup and timings members so that specialisations of the
Synopsys driver can introduce mode flags and bus flags.
Signed-off-by: Paul Boddie
Signed-off-by: Ezequiel Garcia
Signed-off-by: H. Nikolaus Schaller
-authored-by: Paul Boddie
Signed-off-by: H. Nikolaus Schaller
---
drivers/gpu/drm/ingenic/ingenic-dw-hdmi.c | 57 ++-
1 file changed, 46 insertions(+), 11 deletions(-)
diff --git a/drivers/gpu/drm/ingenic/ingenic-dw-hdmi.c
b/drivers/gpu/drm/ingenic/ingenic-dw-hdmi.c
index
From: Paul Boddie
A specialisation of the generic Synopsys HDMI driver is employed for JZ4780
HDMI support. This requires a new driver, plus device tree and configuration
modifications.
Signed-off-by: Paul Boddie
Signed-off-by: H. Nikolaus Schaller
---
arch/mips/boot/dts/ingenic/jz4780.dtsi
Enable CONFIG options as modules.
Signed-off-by: Ezequiel Garcia
Signed-off-by: H. Nikolaus Schaller
---
arch/mips/configs/ci20_defconfig | 7 +++
1 file changed, 7 insertions(+)
diff --git a/arch/mips/configs/ci20_defconfig b/arch/mips/configs/ci20_defconfig
index ab7ebb0668340
. As soon as the overlay plane is enabled
things go south :P
Tested on MIPS Creator CI20 board.
Signed-off-by: Paul Boddie
Signed-off-by: Ezequiel Garcia
Signed-off-by: H. Nikolaus Schaller
---
drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 163 --
drivers/gpu/drm/ingenic
From: Paul Boddie
A specialisation of the generic Synopsys HDMI driver is employed for JZ4780
HDMI support. This requires a new driver, plus device tree and configuration
modifications.
Signed-off-by: Paul Boddie
Signed-off-by: Ezequiel Garcia
Signed-off-by: H. Nikolaus Schaller
---
drivers
dingly, but clk_set_rate()
>> used crtc_state->adjusted_mode->clock instead.
>> Fixes: 28ab7d35b6e0 ("drm/ingenic: Properly compute timings when using a
>> 3x8-bit panel")
>> Cc: sta...@vger.kernel.org # v5.10
Tested-by: H. Nikolaus Schaller # CI20/jz4780 (HDM
Without we get an "Specify missing connector_type" warning.
Fixes: ddb8e853dc85 ("drm/panel: panel-simple: validate panel description")
Signed-off-by: H. Nikolaus Schaller
---
drivers/gpu/drm/panel/panel-simple.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers
so that we can suggest a patch.
BR and thanks,
Nikolaus
> Am 31.01.2021 um 11:54 schrieb H. Nikolaus Schaller :
>
> ping?
>
>> Am 12.01.2021 um 12:41 schrieb H. Nikolaus Schaller :
>>
>> Hi,
>> according to bindings/display/panel/panel-common.yaml
>>
Hi,
> Am 11.02.2021 um 11:36 schrieb Hans Verkuil :
>
> This series improves the drm_bridge support for CEC by introducing two
> new bridge ops in the first patch, and using those in the second patch.
>
> This makes it possible to call cec_s_conn_info() and set
> CEC_CAP_CONNECTOR_INFO for the
ping?
> Am 12.01.2021 um 12:41 schrieb H. Nikolaus Schaller :
>
> Hi,
> according to bindings/display/panel/panel-common.yaml
> and by using "panel-simple" as compatible string we
> can define almost all properties of a DSI panel by a
> device tree entry.
>
&
Hi Paul,
> Am 24.01.2021 um 10:47 schrieb H. Nikolaus Schaller :
>
> Hi Paul,
>
>> Am 24.01.2021 um 10:43 schrieb Paul Cercueil :
>>
>> Hi Nikolaus,
>>
>> Le dim. 24 janv. 2021 à 10:30, H. Nikolaus Schaller a
>> écrit :
>>> Hi
Hi Paul,
> Am 24.01.2021 um 10:43 schrieb Paul Cercueil :
>
> Hi Nikolaus,
>
> Le dim. 24 janv. 2021 à 10:30, H. Nikolaus Schaller a
> écrit :
>> Hi Paul,
>> we observed the same issue on the jz4730 (which is almost identical
>> to the jz4740 wrt. LC
Hi Paul,
we observed the same issue on the jz4730 (which is almost identical
to the jz4740 wrt. LCDC) and our solution [1] was simpler.
It leaves the hwdesc f0 and f1 as they are and just takes f1 for really
programming the first DMA descriptor if there is no OSD.
We have tested on jz4730 and
Hi,
according to bindings/display/panel/panel-common.yaml
and by using "panel-simple" as compatible string we
can define almost all properties of a DSI panel by a
device tree entry.
Except the connector and bus format which can only be
set by adding the same information to the panel-simple
> Am 10.01.2021 um 12:35 schrieb Paul Cercueil :
>
> Hi Thomas,
>
> Le sam. 9 janv. 2021 à 1:33, Thomas Bogendoerfer
> a écrit :
>> On Sat, Jan 09, 2021 at 12:58:05AM +0100, Thomas Bogendoerfer wrote:
>>> On Fri, Jan 08, 2021 at 08:20:43PM +, Paul Cercueil wrote:
>>> > Hi Thomas,
>>> >
Hi Ivaylo,
> Am 27.11.2020 um 19:44 schrieb Ivaylo Dimitrov :
>
> Hi,
>
> On 27.11.20 г. 19:30 ч., Tomi Valkeinen wrote:
>> On 27/11/2020 17:37, Ivaylo Dimitrov wrote:
>>> With 5.9.11 and the patch on top, n900 boots fine, albeit display remains
>>> blank, could be related to
>>> brightness,
Hi Tomi,
I hope you had a good weekend.
And I have added back the CC: list because I think we have progress after our
internal discussion and only one issue remaining.
> Am 13.11.2020 um 15:49 schrieb Tomi Valkeinen :
>
> On 13/11/2020 16:41, H. Nikolaus Schaller wrote:
>> Hi T
> Am 11.11.2020 um 11:11 schrieb Tomi Valkeinen :
>
> On 11/11/2020 09:48, H. Nikolaus Schaller wrote:
>>
>>> Am 11.11.2020 um 07:40 schrieb Tomi Valkeinen :
>>>
>>> On 10/11/2020 23:04, H. Nikolaus Schaller wrote:
>>>>
>>>>&g
> Am 10.11.2020 um 14:49 schrieb H. Nikolaus Schaller :
>
> Hi Tomi,
>
>> Am 09.11.2020 um 12:33 schrieb Tomi Valkeinen :
>>
>> On 09/11/2020 13:09, H. Nikolaus Schaller wrote:
>>
>>>>> I see.
>>>>> Anyways there is missing so
Hi Tomi,
> Am 09.11.2020 um 12:33 schrieb Tomi Valkeinen :
>
> On 09/11/2020 13:09, H. Nikolaus Schaller wrote:
>
>>>> I see.
>>>> Anyways there is missing some simple thing which makes the driver not
>>>> prepared/enabled.
>>>&g
> Am 11.11.2020 um 07:40 schrieb Tomi Valkeinen :
>
> On 10/11/2020 23:04, H. Nikolaus Schaller wrote:
>>
>>> Am 10.11.2020 um 17:52 schrieb Tomi Valkeinen :
>>>
>>> On 10/11/2020 18:49, H. Nikolaus Schaller wrote:
>>>
>>> I gue
> Am 10.11.2020 um 17:52 schrieb Tomi Valkeinen :
>
> On 10/11/2020 18:49, H. Nikolaus Schaller wrote:
>
> I guess you have the same issue. It goes to dsi_bridge_mode_valid, then
> __dsi_calc_config, and stays
> there finding good clocks.
Yes, I could trace it down to ex
> Am 09.11.2020 um 09:04 schrieb Tomi Valkeinen :
>
> On 07/11/2020 14:19, H. Nikolaus Schaller wrote:
>
>> I have set up based on our complete letux-5.10-rc2 tree and maybe using our
>> private config makes
>> the difference. Anyways, the driver is now
> Am 09.11.2020 um 11:34 schrieb Tomi Valkeinen :
>
> On 09/11/2020 12:31, H. Nikolaus Schaller wrote:
>>
>>> Am 09.11.2020 um 11:22 schrieb Tomi Valkeinen :
>>>
>>> On 09/11/2020 11:30, H. Nikolaus Schaller wrote:
>>>>
>>>>&g
> Am 09.11.2020 um 11:22 schrieb Tomi Valkeinen :
>
> On 09/11/2020 11:30, H. Nikolaus Schaller wrote:
>>
>>> Am 09.11.2020 um 09:04 schrieb Tomi Valkeinen :
>>>
>>> On 07/11/2020 14:19, H. Nikolaus Schaller wrote:
>>>
>>>> I
Hi Tomi,
> Am 06.11.2020 um 16:04 schrieb Tomi Valkeinen :
>
>>
>> I took the driver and make my omap4-sdp dts to use it. It probes for me, but
>> stop after that:
>>
>> [ 119.346374] omapdss_dss 5800.dss: supply vdda_video not found, using
>> dummy regulator
>> [ 119.358398] DSS: OMAP
> Am 05.11.2020 um 19:28 schrieb Tomi Valkeinen :
>
> On 05/11/2020 20:14, H. Nikolaus Schaller wrote:
>>
>>> Am 05.11.2020 um 18:36 schrieb Tomi Valkeinen :
>>>
>>> Hi,
>>>
>>> On 05/11/2020 19:15, H. Nikolaus Schaller wrote:
&
> Am 05.11.2020 um 18:36 schrieb Tomi Valkeinen :
>
> Hi,
>
> On 05/11/2020 19:15, H. Nikolaus Schaller wrote:
>
>> Next, I migrated my long waiting mipi_dsi/drm_panel driver conversion for
>> the panel of the Pyra handheld (omap 5 based) to compile on 5.10-rc2
Hi Tomi,
> Am 05.11.2020 um 13:02 schrieb Tomi Valkeinen :
>
> Hi,
>
> This is third version of the series sent by Sebastian in February:
>
> https://www.spinics.net/lists/linux-omap/msg153465.html
>
> I took the patches from his git tree, and rebased on 5.10-rc2. There
> were some conflicts
Hi Ezequiel,
> Am 27.08.2020 um 09:21 schrieb H. Nikolaus Schaller :
>
> Hi Ezequiel,
>
>> Am 24.08.2020 um 19:38 schrieb Ezequiel Garcia
>> :
>>
>> On Mon, 24 Aug 2020 at 13:05, H. Nikolaus Schaller
>> wrote:
>>>
>>> Hi Ezequie
Hi Ezequiel,
> Am 10.09.2020 um 14:14 schrieb Ezequiel Garcia
> :
>>> With the comment from Paul, I think it is best if you push them for review.
>>>
>>> My patch set based on v5.9-rc2 is here (including one EFUSE patch which I
>>> have
>>> included only for making my Ethernet interface work
Hi Ezequiel,
> Am 24.08.2020 um 19:38 schrieb Ezequiel Garcia
> :
>
> On Mon, 24 Aug 2020 at 13:05, H. Nikolaus Schaller wrote:
>>
>> Hi Ezequiel,
>
> The fix is just re-organizing the code a bit. Just pushed a possible
> fix for that (following the IPU han
Hi Ezequiel,
> Am 24.08.2020 um 15:46 schrieb Ezequiel Garcia
> :
>
> On Fri, 21 Aug 2020 at 19:24, Paul Cercueil wrote:
>>
>>
>>
>> Le sam. 22 août 2020 à 0:11, Paul Boddie a
>> écrit :
>>
>> If you send clean patches, there's no reason for me not to merge them.
>>
>
> I'd really like
Hi Ezequiel,
> Am 20.08.2020 um 00:26 schrieb Ezequiel Garcia
> :
>
> On Wed, 19 Aug 2020 at 15:50, H. Nikolaus Schaller wrote:
>>
>> Maybe, can you share your rebased tree to clearly identify the
>> subtle differences? Maybe I have broken something by the reba
Hi Ezequiel,
> Am 19.08.2020 um 12:21 schrieb Ezequiel Garcia
> :
>
> Hello,
>
> First of all, I'd like to thank everyone for the great work
> on ingenic-drm. The driver is in very good shape
> and a pleasure to work with.
>
> Yesterday, I checked out branch "paulb-jz4780-ci20-hdmi-5.8-rc5",
201 - 300 of 565 matches
Mail list logo