On Tue, Oct 08, 2024 at 04:37:42PM +0200, Frieder Schrempf wrote:
> Frieder Schrempf (4):
...
> arm64: dts: imx8mm-kontron: Add support for display bridges on BL
> i.MX8MM
> arm64: dts: imx8mm-kontron: Add DL (Display-Line) overlay with LVDS
> support
Applied both, thanks!
On Tue, Oct 08, 2024 at 09:21:05AM +0200, Frieder Schrempf wrote:
> On 28.08.24 9:46 AM, Frieder Schrempf wrote:
> > From: Frieder Schrempf
> >
> > This add support for the display bridges (DSI->LVDS and DSI->HDMI)
> > on the BL i.MX8MM and the 7" LVDS panel in a separate overlay.
> >
> > Only o
On Mon, Mar 04, 2024 at 06:48:58PM -0600, Adam Ford wrote:
> The DSI to HDMI bridge supports hot-plut-detect, but the
> driver didn't previously support a shared IRQ GPIO. With
> the driver updated, the interrupt can be added to the bridge.
>
> Signed-off-by: Adam Ford
> Reviewed-by: Laurent Pin
e
> sure it's still enabled.
>
> Fixes: 4fc8cb47fcfd ("drm/display: Move HDMI helpers into display-helper
> module")
> Reported-by: Mark Brown
> Reported-by: Alexander Stein
> Signed-off-by: Maxime Ripard
Acked-by: Shawn Guo
On Fri, Jan 26, 2024 at 09:57:26AM +0100, Yannic Moog wrote:
> Enable the i.MX8MP LDB driver used for display support of the i.MX8MP
> LVDS interface.
>
> Signed-off-by: Yannic Moog
Applied, thanks!
On Fri, Jan 26, 2024 at 09:57:25AM +0100, Yannic Moog wrote:
> The imx8mp-phyboard-pollux has on-board lvds interface connections. An
> edt,etml1010g3dra panel is supported for this interface. Add device tree
> nodes for backlight and panel.
>
> Signed-off-by: Yannic Moog
Applied, thanks!
On Mon, Nov 27, 2023 at 05:12:29PM +0100, Roland Hieber wrote:
> From: Marco Felsch
>
> This adds the device tree support for the MIPI-DSI block. The block can
> be used as encoder for the parallel signals coming from the lcdif block.
>
> Signed-off-by: Marco Felsch
> Signed-off-by: Roland Hieb
On Sun, Aug 27, 2023 at 12:54:29AM +0300, Dmitry Baryshkov wrote:
> The SK-ATM0700D4-Plug is an extension board (provided by the same
> manufacturer, [1]) which can be connected to the SK-IMX53 panel kit. The
> panel can be connected either using the RGB parallel bus or using the
> LVDS connector (
On Thu, Jun 16, 2022 at 01:14:07AM +0300, Laurent Pinchart wrote:
> Now that a header exists with macros for the media interface bus-type
> values, replace hardcoding numerical constants with the corresponding
> macros in the DT sources.
>
> Signed-off-by: Laurent Pinchart
Applied, thanks!
On Mon, Feb 21, 2022 at 10:53:12AM +0100, Oleksij Rempel wrote:
> From: David Jander
>
> The gpio1 0 pin is controlling CAN termination, not USB H1 VBUS. So,
> remove wrong regulator and assign this gpio to new DT CAN termination
> property.
>
> Signed-off-by: David Jander
> Signed-off-by: Olek
On Mon, Feb 21, 2022 at 10:53:11AM +0100, Oleksij Rempel wrote:
> From: Robin van der Gracht
>
> This series of devices is using lg,lb070wv8 instead of kyo,tcg121xglp.
>
> Signed-off-by: Robin van der Gracht
> Signed-off-by: Oleksij Rempel
Applied, thanks!
On Mon, Feb 21, 2022 at 10:53:10AM +0100, Oleksij Rempel wrote:
> From: Robin van der Gracht
>
> Interrupt counter is mainlined, now we can add missing counter nodes.
>
> Signed-off-by: Robin van der Gracht
> Signed-off-by: Oleksij Rempel
Applied, thanks!
On Mon, Feb 21, 2022 at 10:53:08AM +0100, Oleksij Rempel wrote:
> From: David Jander
>
> countedX lines have different board names (YACO_x). And REV_ and BOARD_ pins
> have multiple functions. So, use names exposed to the OS.
>
> Signed-off-by: David Jander
> Signed-off-by: Oleksij Rempel
App
On Mon, Feb 21, 2022 at 10:53:07AM +0100, Oleksij Rempel wrote:
> From: David Jander
>
> backlight_led is the dimmable backlight for the rubber border on the case. It
> is also used to highlight the power- and some other buttons.
>
> MX6QDL_PAD_SD4_DAT1__PWM3_OUT is also assigned as output for p
On Mon, Feb 21, 2022 at 10:53:06AM +0100, Oleksij Rempel wrote:
> From: David Jander
>
> We have two backlight sources on this boards. Use more specific name for
> the LCD backlight to see the difference.
>
> Signed-off-by: David Jander
> Signed-off-by: Robin van der Gracht
> Signed-off-by: Ol
On Mon, Feb 21, 2022 at 10:53:05AM +0100, Oleksij Rempel wrote:
> From: David Jander
>
> Recover default behavior of the device and set maximal brightness
>
> Signed-off-by: David Jander
> Signed-off-by: Oleksij Rempel
Applied, thanks!
On Mon, Feb 21, 2022 at 10:53:09AM +0100, Oleksij Rempel wrote:
> From: Robin van der Gracht
>
> According to Documentation/devicetree/bindings/sound/fsl,ssi.txt
> 'fsl,mode' should be specified for AC97 mode only.
>
> The 'fsl,ssi' documentation doesn't say anything about specifying
> 'sound-da
On Wed, Apr 6, 2022 at 9:23 AM Shawn Guo wrote:
>
> On Mon, Feb 21, 2022 at 10:53:05AM +0100, Oleksij Rempel wrote:
> > From: David Jander
> >
> > Recover default behavior of the device and set maximal brightness
> >
> > Signed-off-by: David Jande
On Mon, Feb 21, 2022 at 10:53:05AM +0100, Oleksij Rempel wrote:
> From: David Jander
>
> Recover default behavior of the device and set maximal brightness
>
> Signed-off-by: David Jander
> Signed-off-by: Oleksij Rempel
> ---
> arch/arm/boot/dts/imx6dl-victgo.dts | 2 +-
> arch/arm/boot/dts/
On Fri, Feb 11, 2022 at 02:30:33PM +0100, Oleksij Rempel wrote:
> The gpio1 0 pin is controlling CAN termination, not USB H1 VBUS. So,
> remove wrong regulator and assign this gpio to new DT CAN termnation
Sigh, the typo is still there with a new version.
Fixed it up and applied the series.
Shaw
On Mon, Jan 31, 2022 at 11:28:38AM +0100, Oleksij Rempel wrote:
> From: Robin van der Gracht
>
> Signed-off-by: Robin van der Gracht
Please write up some commit log. Also your SoB is missing.
Shawn
> ---
> arch/arm/boot/dts/imx6dl-prtvt7.dts | 42 +
> 1 file chan
On Wed, Jan 05, 2022 at 12:04:34PM +0100, Oleksij Rempel wrote:
> Hi Shawn,
>
> sorry for the delay, I just came back to work.
>
> On Mon, Dec 06, 2021 at 09:06:28AM +0800, Shawn Guo wrote:
> > On Mon, Nov 22, 2021 at 01:43:10PM +0100, Oleksij Rempel wrote:
> > >
On Mon, Nov 22, 2021 at 01:43:10PM +0100, Oleksij Rempel wrote:
> The tsc2046 is an ADC used as touchscreen controller. To share as mach
> code as possible, we should use it as actual ADC + virtual tochscreen
> controller.
> With this patch we make use of the new kernel IIO and HID infrastructure.
On Mon, Nov 22, 2021 at 01:43:08PM +0100, Oleksij Rempel wrote:
> From: Robin van der Gracht
>
> Signed-off-by: Robin van der Gracht
> ---
> arch/arm/boot/dts/imx6dl-prtvt7.dts | 40 +
> 1 file changed, 40 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6dl-prtv
On Tue, Aug 24, 2021 at 09:59:04PM +0200, Sam Ravnborg wrote:
> On Tue, Aug 24, 2021 at 10:58:31AM +0800, Shawn Guo wrote:
> > On Mon, Aug 09, 2021 at 01:10:08PM +0800, Shawn Guo wrote:
> > > It adds a DRM panel driver for Sony Tulip Truly NT35521 5.24" 1280x720
> > &g
On Mon, Aug 09, 2021 at 01:10:08PM +0800, Shawn Guo wrote:
> It adds a DRM panel driver for Sony Tulip Truly NT35521 5.24" 1280x720
> DSI panel, which can be found on Sony Xperia M4 Aqua phone. The panel
> backlight is managed through DSI link.
>
> The driver is built using
On Wed, Aug 04, 2021 at 06:34:36AM +0200, Oleksij Rempel wrote:
> changes v4:
> - add vref-supply to adc@0
> - split gpio assignment for the mdio node
>
> changes v3:
> - drop panel bindings patches, it is already in drm-misc-next
> - remove some new lines
> - reorder compatibles at the start of t
On Wed, Aug 11, 2021 at 12:51:56PM -0600, Rob Herring wrote:
> On Wed, Aug 04, 2021 at 04:13:51PM +0800, Shawn Guo wrote:
> > The Truly NT35521 is a 5.24" 1280x720 DSI panel, and the backlight is
> > managed through DSI link.
> >
> > Signed-off-by: Shawn Guo
&
GPIOs with regulators and adding
Backlight GPIO support.
[1] https://github.com/msm8916-mainline/linux-mdss-dsi-panel-driver-generator
Signed-off-by: Shawn Guo
---
drivers/gpu/drm/panel/Kconfig | 10 +
drivers/gpu/drm/panel/Makefile| 1 +
.../panel/panel-sony-
The Sony Tulip Truly NT35521 is a 5.24" 1280x720 DSI panel, which can
be found on Sony Xperia M4 Aqua phone. The backlight is managed
through DSI link.
Signed-off-by: Shawn Guo
---
.../panel/sony,tulip-truly-nt35521.yaml | 72 +++
1 file changed, 72 insertions(+)
c
el 5V control GPIOs with regulators.
- Rename Backlight GPIO as "backlight-gpios".
[1] https://github.com/msm8916-mainline/linux-mdss-dsi-panel-driver-generator
Shawn Guo (2):
dt-bindings: display: Add Sony Tulip Truly NT35521 panel support
drm/panel: Add Sony Tulip Truly NT35521 driver
On Sun, Aug 08, 2021 at 05:29:30PM +0200, Stephan Gerhold wrote:
> > 2) The driver works good, if the kernel is launched via "fastboot boot".
> >But if the kernel is flashed to eMMC and launched by bootloader with
> >splash screen, kernel will fail to bring up the panel. After kernel
> >
Hi Sam,
On Wed, Aug 04, 2021 at 06:24:12PM +0200, Sam Ravnborg wrote:
> Hi Shawn,
>
> see a few comments in the following.
Thanks for the review comments! All of them will be addressed in v2.
Shawn
> On Wed, Aug 04, 2021 at 04:13:52PM +0800, Shawn Guo wrote:
> > It add
Hi Stephan,
Thanks for looking at the patch!
On Wed, Aug 04, 2021 at 02:09:19PM +0200, Stephan Gerhold wrote:
> Hi Shawn,
>
> Thanks for the patch!
>
> On Wed, Aug 04, 2021 at 04:13:52PM +0800, Shawn Guo wrote:
> > It adds a drm driver for Truly NT35521 5.24" 1280x72
On Wed, Aug 04, 2021 at 06:03:54PM +0200, Sam Ravnborg wrote:
> Hi Shawn,
>
> On Wed, Aug 04, 2021 at 04:13:51PM +0800, Shawn Guo wrote:
> > The Truly NT35521 is a 5.24" 1280x720 DSI panel, and the backlight is
> > managed through DSI link.
> >
> > Signed-o
It adds a drm driver for Truly NT35521 5.24" 1280x720 DSI panel, which
can be found on Sony Xperia M4 Aqua phone. The panel backlight is
managed through DSI link.
Signed-off-by: Shawn Guo
---
drivers/gpu/drm/panel/Kconfig | 9 +
drivers/gpu/drm/panel/Makefile
The Truly NT35521 is a 5.24" 1280x720 DSI panel, and the backlight is
managed through DSI link.
Signed-off-by: Shawn Guo
---
.../bindings/display/panel/truly,nt35521.yaml | 62 +++
1 file changed, 62 insertions(+)
create mode 100644
Documentation/devicetree/bindings/di
It adds a drm driver for Truly NT35521 5.24" 1280x720 DSI panel, which
can be found on Sony Xperia M4 Aqua phone.
Shawn Guo (2):
dt-bindings: display: panel: Add Truly NT35521 panel support
drm/panel: Add Truly NT35521 panel driver
.../bindings/display/panel/truly,nt35521.yaml
On Wed, Jul 14, 2021 at 06:53:49AM +0200, Oleksij Rempel wrote:
> From: Sam Ravnborg
>
> Add SKOV imx6q/dl LT2, LT6 and mi1010ait-1cp1 boards.
>
> Signed-off-by: Sam Ravnborg
> Signed-off-by: Søren Andersen
> Signed-off-by: Juergen Borleis
> Signed-off-by: Ulrich Ölmann
> Signed-off-by: Mich
On Sun, Jul 18, 2021 at 10:22:14PM +0200, Sam Ravnborg wrote:
> Hi Oleksij,
> On Wed, Jul 14, 2021 at 06:53:49AM +0200, Oleksij Rempel wrote:
> > From: Sam Ravnborg
>
> The real author one these dts files are Juergen Borleis IIRC.
> I made some internal refactoring / renaming which is why I thing
On Wed, Jun 09, 2021 at 02:10:50PM +0200, Oleksij Rempel wrote:
> From: Sam Ravnborg
>
> Add SKOV imx6q/dl LT2, LT6 and mi1010ait-1cp1 boards.
>
> Signed-off-by: Sam Ravnborg
> Signed-off-by: Søren Andersen
> Signed-off-by: Juergen Borleis
> Signed-off-by: Ulrich Ölmann
> Signed-off-by: Mich
On Thu, Apr 29, 2021 at 12:29:53AM +0200, Sebastian Reichel wrote:
> This adds device tree files for the General Electric Healthcare
> (GEHC) B1x5v2 series. All models make use of Congatec's QMX6 module,
> which is described in its own device tree include, so that it can
> also be used by other boa
On Mon, Dec 07, 2020 at 03:09:31PM +0100, Oleksij Rempel wrote:
> changes v7:
> - panel-simple.yaml: fix comments and part order
> - panel-simple.yaml: invent a product description for the Kyocera tcg070wvlq
> panel
>
> changes v6:
> - do more panel-simple.yaml related cleanups
>
> changes v5:
>
Hi Uwe,
On Thu, Dec 10, 2020 at 9:05 PM Uwe Kleine-König
wrote:
> > > @@ -111,6 +118,8 @@
> > >
> > > #define SN_LINK_TRAINING_TRIES 10
> > >
> > > +#define SN_PWM_GPIO3
> >
> > So this maps to the GPIO4 described in sn65dsi86 datasheet. I'm
> > wondering if
From: Shawn Guo
It renames GPIO register bits to drop 'SN_' prefix, so that they are
consistent to other definitions - prefixing register name with 'SN_' but
not for bit fields.
Signed-off-by: Shawn Guo
---
drivers/gpu/drm/bridge/ti-sn65dsi86.c | 26 +-
On Mon, Dec 07, 2020 at 10:40:22PM -0600, Bjorn Andersson wrote:
> The SN65DSI86 provides the ability to supply a PWM signal on GPIO 4,
> with the primary purpose of controlling the backlight of the attached
> panel. Add an implementation that exposes this using the standard PWM
> framework, to all
qcom-geni:
> Disable DMA processing on the Lenovo Yoga C630")'.
>
> Signed-off-by: Bjorn Andersson
Acked-by: Shawn Guo
___
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
On Mon, Oct 19, 2020 at 05:48:29PM +0200, Daniel Vetter wrote:
> On Fri, Oct 16, 2020 at 07:46:41PM +0800, Shawn Guo wrote:
> > Indeed! Adding drm_crtc_vblank_reset() into driver crtc reset hook
> > removes the WARNING for me. Really appreciate your comments, Daniel!
>
On Fri, Oct 16, 2020 at 11:30:04AM +0200, Daniel Vetter wrote:
> On Fri, Oct 16, 2020 at 10:54 AM Shawn Guo wrote:
> >
> > On Fri, Oct 16, 2020 at 09:58:46AM +0200, Daniel Vetter wrote:
> > > On Fri, Oct 16, 2020 at 9:13 AM Shawn Guo wrote:
> > > >
> >
On Fri, Oct 16, 2020 at 09:58:46AM +0200, Daniel Vetter wrote:
> On Fri, Oct 16, 2020 at 9:13 AM Shawn Guo wrote:
> >
> > Commit 5caa0feafcc6 ("drm/vblank: Lock down vblank->hwmode more") added
> > WARN_ON_ONCE() for atomic drivers to warn the case that vsync is
ting services may treat kernel
WARNINGS as crashes. Let's drop WARN_ON_ONCE() and change drm_dbg_core()
to drm_warn_once() for warning undefined mode timing.
Signed-off-by: Shawn Guo
---
drivers/gpu/drm/drm_vblank.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git
On Fri, Sep 04, 2020 at 04:53:02PM +0200, Krzysztof Kozlowski wrote:
> All Purism Librem5 phones have three compatibles so they need their own
> entry to fix dbts_check warnings like:
>
> arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dt.yaml: /:
> compatible: ['purism,librem5r2', 'purism,l
On Fri, Sep 04, 2020 at 04:53:07PM +0200, Krzysztof Kozlowski wrote:
> The int-gpios was deprecated in favor of generic interrupts property.
>
> Signed-off-by: Krzysztof Kozlowski
Applied patch #8 ~ #13, thanks.
___
dri-devel mailing list
dri-devel@lis
ent:
> Replace HTTP with HTTPS.
>
> Signed-off-by: Alexander A. Klimov
s/mxs/imx in the subject. Otherwise:
Acked-by: Shawn Guo
> ---
> Continuing my work started at 93431e0607e5.
> See also: git log --oneline '--author=Alexander A. Klimov
> ' v
On Sat, Jun 27, 2020 at 7:53 PM Shawn Guo wrote:
>
> From: Shawn Guo
>
> The msm/mdp5 driver uses state of drm_private_obj as its global atomic
> state, which keeps the assignment of hwpipe to plane. With
> drm_private_obj missing from duplicate state call in context of atomi
From: Shawn Guo
The msm/mdp5 driver uses state of drm_private_obj as its global atomic
state, which keeps the assignment of hwpipe to plane. With
drm_private_obj missing from duplicate state call in context of atomic
suspend/resume helpers, mdp5 suspend works with no problem only for the
very
From: Shawn Guo
The msm/mdp5 driver uses drm_private_obj as its global atomic state,
which keeps the assignment of hwpipe to plane. With drm_private_obj
missing from duplicate state call, mdp5 suspend works with no problem
only for the very first time. Any subsequent suspend will hit the
On Fri, May 22, 2020 at 04:03:14PM -0600, Jordan Crouse wrote:
> diff --git a/drivers/gpu/drm/msm/msm_gpummu.c
> b/drivers/gpu/drm/msm/msm_gpummu.c
> index 34980d8eb7ad..0ad0f848560a 100644
> --- a/drivers/gpu/drm/msm/msm_gpummu.c
> +++ b/drivers/gpu/drm/msm/msm_gpummu.c
> @@ -21,11 +21,6 @@ struc
ress space initialization
> drm/msm: Update the MMU helper function APIs
FWIW, on A405 with glmark2:
Tested-by: Shawn Guo
___
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
On Thu, May 14, 2020 at 04:36:10PM +0200, Ricardo Cañuelo wrote:
> Group the port definitions of the dvi-converter in a 'ports' node to
> make it compliant with the ti,tfp410 binding.
>
> Signed-off-by: Ricardo Cañuelo
s/ims53/imx53-cx9020 in subject.
I fixed it up and applied the patch.
Shawn
;
> Signed-off-by: Jason Yan
Acked-by: Shawn Guo
___
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
s per
git log of file/folder changed here. Other than that:
Reviewed-by: Shawn Guo
___
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
after adreno_gpu_init().
Signed-off-by: Shawn Guo
---
drivers/gpu/drm/msm/adreno/a4xx_gpu.c | 53 +--
1 file changed, 50 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/msm/adreno/a4xx_gpu.c
b/drivers/gpu/drm/msm/adreno/a4xx_gpu.c
index 70de59751188..9e244982974e 100644
d-off-by: Shawn Guo
---
drivers/gpu/drm/msm/adreno/a4xx_gpu.c | 29 +-
drivers/gpu/drm/msm/adreno/adreno_device.c | 11
drivers/gpu/drm/msm/adreno/adreno_gpu.c| 2 +-
drivers/gpu/drm/msm/adreno/adreno_gpu.h| 5
4 files changed, 34 insertions(+
The series adds support for adreno a405 found on MSM8936/MSM8939 and APQ
variants.
Shawn Guo (2):
drm/msm/a4xx: add adreno a405 support
drm/msm/a4xx: add a405_registers for a405 device
drivers/gpu/drm/msm/adreno/a4xx_gpu.c | 82 ++
drivers/gpu/drm/msm/adreno
Hi Konrad,
On Fri, May 01, 2020 at 10:51:59PM +0200, Konrad Dybcio wrote:
> Signed-off-by: Konrad Dybcio
Please write up some commit log. Since this is based on msm8x16_config,
maybe document the differences from it in commit log?
> ---
> drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c | 70
able" and "reset" as found in
> the device tree bindings for panel GPIOs.
>
> This saves a lot of code in the driver and makes it possible
> to get rid of the platform data header altogether.
>
> Cc: Sascha Hauer
> Cc: Anson Huang
> Cc: Shawn Guo
> Cc:
On Mon, Oct 14, 2019 at 12:00:25PM +0200, Nicolas Saenz Julienne wrote:
> On Mon, 2019-10-14 at 16:28 +0800, Shawn Guo wrote:
> > On Tue, Sep 24, 2019 at 08:12:38PM +0200, Nicolas Saenz Julienne wrote:
> > > qoriq-mc's dpmacs DMA configuration is inherited from their parent
On Tue, Sep 24, 2019 at 08:12:39PM +0200, Nicolas Saenz Julienne wrote:
> The bus behind the board's PCIe core has DMA addressing limitations. Add
> an empty 'dma-ranges' property on all PCIe bus descriptions to inform
> the OF core that a translation is due further down the line.
>
> Signed-off-b
On Tue, Sep 24, 2019 at 08:12:38PM +0200, Nicolas Saenz Julienne wrote:
> qoriq-mc's dpmacs DMA configuration is inherited from their parent node,
> which acts a bus in this regard. So far it maked all devices as
> dma-coherent but no dma-ranges recommendation is made.
>
> The truth is that the un
On Wed, Sep 11, 2019 at 07:40:35PM -0700, Guido Günther wrote:
> Temperature and hysteresis were picked after the CPU.
>
> Signed-off-by: Guido Günther
The patch prefix should be 'arm64: dts: ...'
I fixed it up and applied the patch.
Shawn
> ---
> arch/arm64/boot/dts/freescale/imx8mq.dtsi |
On Mon, Sep 16, 2019 at 04:32:55PM +0200, Lucas Stach wrote:
> On Mi, 2019-09-11 at 19:40 -0700, Guido Günther wrote:
> > Add #cooling-cells for when the gpu acts as a cooling device.
> >
> > Signed-off-by: Guido Günther
>
> Reviewed-by: Lucas Stach
Lucas,
I assume you will pick it up.
Shawn
On Thu, Jul 11, 2019 at 01:26:40PM +0200, Andrzej Pietrasiewicz wrote:
> Use the ddc pointer provided by the generic connector.
>
> Signed-off-by: Andrzej Pietrasiewicz
Acked-by: Shawn Guo
___
dri-devel mailing list
dri-devel@lists.freede
On Thu, Jul 11, 2019 at 01:26:39PM +0200, Andrzej Pietrasiewicz wrote:
> Use the ddc pointer provided by the generic connector.
>
> Signed-off-by: Andrzej Pietrasiewicz
Acked-by: Shawn Guo
___
dri-devel mailing list
dri-devel@lists.freede
On Sun, Jun 30, 2019 at 08:18:59AM +0200, Sam Ravnborg wrote:
> Drop use of the deprecated drmP.h header file.
> Fix fallout.
>
> Signed-off-by: Sam Ravnborg
> Cc: Shawn Guo
> Cc: David Airlie
> Cc: Daniel Vetter
Acked-by: Shawn Guo
On Fri, Jun 14, 2019 at 10:35:55PM +0200, Daniel Vetter wrote:
> They're the default.
>
> Aside: Would be really nice to switch the others over to
> drm_gem_object_funcs.
>
> Signed-off-by: Daniel Vetter
> Cc: Shawn Guo
Acked-by: Shawn Guo
> ---
> driv
Hi Laurentiu,
On Tue, May 28, 2019 at 07:03:54AM +, Laurentiu Palcu wrote:
> Hi Shawn, Lucas,
>
> On Tue, May 28, 2019 at 09:38:02AM +0800, Shawn Guo wrote:
> > Caution: EXT Email
> >
> > Hi Lucas,
> >
> > On Mon, May 27, 2019 at 03:36:53PM +0200
Hi Lucas,
On Mon, May 27, 2019 at 03:36:53PM +0200, Lucas Stach wrote:
> We have been looking at how to support DCSS in mainline for a while,
> but most of the actual work got pushed behind in schedule due to other
> priorities.
I have some time to contribute. Would you suggest how I should help
On Wed, May 08, 2019 at 07:18:27PM +0200, Guido Günther wrote:
> If somebody is working on DCSS support it'd be cool to know since this
I have some time slots here and will start looking at it, if no one else
is already working on it.
Shawn
> driver is currently a component of imx-display-subsys
On Thu, Mar 21, 2019 at 10:49:03AM +0100, Uwe Kleine-König wrote:
> Hello,
>
> On Wed, Mar 20, 2019 at 01:01:26PM +, Leonard Crestez wrote:
> > Commit d80f8206905c ("pwm: imx: Split into two drivers") also adds a new
> > CONFIG_PWM_IMX27 for the PWM block on recent IMX chips and we should
> >
On Thu, Oct 25, 2018 at 05:09:29PM +0200, Alex Gonzalez wrote:
> Alex Gonzalez (4):
> drm/panel: simple: Add AUO G101EVN010 panel support
> ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel
> ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX
> ARM: dts: ccimx6ulsbcpro: Add suppo
On Thu, Nov 15, 2018 at 11:16:23PM +0100, Fernando Ramos wrote:
> This patch unifies the naming of DRM functions for reference counting as
> requested on Documentation/gpu/todo.rst
>
> Signed-off-by: Fernando Ramos
> ---
> drivers/gpu/drm/arc/arcpgu_drv.c | 4 ++--
> drivers/gpu/drm/
On Fri, Nov 16, 2018 at 12:25:41PM +, Lorenzo Pieralisi wrote:
> On Mon, Oct 08, 2018 at 06:06:21PM +, Leonard Crestez wrote:
> > On some chips the PCIE and PCIE_PHY blocks are in separate power domains
> > which can be power-gated independently. The pci driver needs to handle
> > this by k
On Thu, Oct 25, 2018 at 05:09:29PM +0200, Alex Gonzalez wrote:
> Alex Gonzalez (4):
> drm/panel: simple: Add AUO G101EVN010 panel support
> ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel
> ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX
> ARM: dts: ccimx6ulsbcpro: Add suppo
On Wed, Oct 31, 2018 at 12:17:50PM +, Leonard Crestez wrote:
> On 10/31/2018 8:12 AM, Shawn Guo wrote:
> > On Mon, Oct 08, 2018 at 06:06:23PM +, Leonard Crestez wrote:
> >> This was implemented in the driver but not actually defined and
> >> referenced in d
On Mon, Oct 08, 2018 at 06:06:23PM +, Leonard Crestez wrote:
> This was implemented in the driver but not actually defined and
> referenced in dts. This makes it always on.
>
> From reference manual in section "10.4.1.4.1 Power Distribution":
>
> "Display domain - The DISPLAY domain contains
On Mon, Oct 08, 2018 at 06:06:19PM +, Leonard Crestez wrote:
> The DISPLAY power domain on imx6sx has 7 clocks.
>
> Signed-off-by: Leonard Crestez
Applied, thanks.
___
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop
On Mon, Oct 01, 2018 at 11:56:17PM +0300, Leonard Crestez wrote:
> On some chips the PCIE and PCIE_PHY blocks are in separate power domains
> which can be power-gated independently. The driver needs to handle this
> by keeping both domain active.
>
> This is intended for imx6sx where PCIE is in DI
should
> use drm_atomic_helper_shutdown() instead.
>
> Reviewed-by: Ville Syrjälä
> Signed-off-by: Daniel Vetter
> Cc: Shawn Guo
Acked-by: Shawn Guo
___
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
ann
> Acked-by: Shawn Guo
Pushed to drm-misc-next, thanks.
___
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
On Tue, Sep 18, 2018 at 05:19:09PM +0200, Daniel Vetter wrote:
> On Mon, Aug 27, 2018 at 9:18 AM, Shawn Guo wrote:
> > On Fri, Aug 17, 2018 at 10:24:06AM +0800, zhong jiang wrote:
> >> for_each_available_child_of_node will get and put the node properly,
> >> the followi
s done to highlight the fact that fbdev emulation is an
> internal client that makes use of the driver, it is not part of the
> driver as such. If fbdev setup fails, an error is printed, but the driver
> succeeds probing.
>
> Cc: Shawn Guo
>
On Fri, Aug 17, 2018 at 10:24:06AM +0800, zhong jiang wrote:
> for_each_available_child_of_node will get and put the node properly,
> the following of_node_put will lead to the double put. So just
> remove it.
>
> Signed-off-by: zhong jiang
Acke
mann
Acked-by: Shawn Guo
> ---
> drivers/gpu/drm/zte/zx_drm_drv.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/zte/zx_drm_drv.c
> b/drivers/gpu/drm/zte/zx_drm_drv.c
> index 6f4205e80378..02ae1caf6e8a 100644
> --- a/drivers/g
On Fri, Jul 13, 2018 at 12:39:35PM +0300, Leonard Crestez wrote:
> The imx6sl soc has gpu_2d and gpu_vg, no 3d support:
>
> etnaviv-gpu 220.gpu: model: GC320, revision: 5007
> etnaviv-gpu 2204000.gpu: model: GC355, revision: 1215
>
> The IP blocks seem to be already supported.
>
> Signed-off
On Thu, May 03, 2018 at 12:00:06PM +0200, Türk, Jan wrote:
> > > +/ {
> > > + aliases {
> > > + mmc0 = &usdhc3;
> > > + mmc2 = &usdhc1;
> > > + mmc1 = &usdhc2;
> > > + mmc3 = &usdhc4;
> > > + boardID = &boardID;
> >
> > Why do you need this boardI
On Fri, Apr 27, 2018 at 03:24:41PM +0200, jan.tu...@emtrion.com wrote:
> From: Jan Tuerk
>
> This patch adds support for the emtrion GmbH emCON-MX6 modules.
> They are available with imx.6 Solo, Dual-Lite, Dual and Quad
> equipped with Memory from 512MB to 2GB (configured by U-Boot).
>
> Our def
On Fri, Apr 27, 2018 at 03:24:35PM +0200, jan.tu...@emtrion.com wrote:
> From: Jan Tuerk
>
> Changes for v4:
> - re-arrange the Patch-series to match the DT-submitting-patches
> - Additional patch for the Documentation of the new DT-bindings
>
> [PATCH v4 1/7] dt-bindings: display: Document
On Fri, Apr 20, 2018 at 02:50:52PM +0200, jan.tu...@emtrion.com wrote:
> From: Jan Tuerk
>
> This patch adds support for the emtrion GmbH emCON-MX6 modules.
> They are available with imx.6 Solo, Dual-Lite, Dual and Quad
> equipped with Memory from 512MB to 2GB (configured by U-Boot).
>
> Our def
On Thu, Mar 22, 2018 at 07:40:03PM +0200, Ville Syrjala wrote:
> From: Ville Syrjälä
>
> We want to get rid of plane->fb on atomic drivers. Stop looking at it.
Would it be more precise to use "plane->crtc" in both subject and commit
log? Other than that:
Acked-by:
1 - 100 of 341 matches
Mail list logo
