Cyernet T10C has a bad default PWM frequency causing the display to
strobe when the brightness is less than 100%. Create a new quirk to use
the value from the BIOS rather than the default register value.
Signed-off-by: Allen Ballway
---
V1 -> V2: Fix style issues.
.../gpu/drm/i915/disp
Cyernet T10C has a bad default PWM frequency causing the display to
strobe when the brightness is less than 100%. Create a new quirk to use
the value from the BIOS rather than the default register value.
Signed-off-by: Allen Ballway
---
.../gpu/drm/i915/display/intel_backlight.c| 3
Cybernet T10C cannot be dimmed without the backlight strobing. Create a
new quirk to lock the minimum brightness to the highest supported value.
This aligns the device with its behavior on Windows, which will not
lower the brightness below maximum.
Signed-off-by: Allen Ballway
---
V2 -> V3:
Cybernet T10C cannot be dimmed without the backlight strobing. Create a
new quirk to lock the minimum brightness to the highest supported value.
This aligns the device with its behavior on Windows, which will not
lower the brightness below maximum.
Signed-off-by: Allen Ballway
---
V2 -> V3:
Cybernet T10C cannot be dimmed without the backlight strobing. Create a
new quirk to lock the minimum brightness to the highest supported value.
This aligns the device with its behavior on Windows, which will not
lower the brightness below maximum.
Signed-off-by: Allen Ballway
---
V1 -> V2:
Cybernet T10C cannot be dimmed without the backlight strobing. Create a
new quirk to lock the minimum brightness to the highest supported value.
This aligns the device with its behavior on Windows, which will not
lower the brightness below maximum.
Signed-off-by: Allen Ballway
---
.../gpu/drm
Add MTU3 nodes for MT8186 SoC.
Signed-off-by: Allen-KH Cheng
Tested-by: Chen-Yu Tsai
---
arch/arm64/boot/dts/mediatek/mt8186.dtsi | 75
1 file changed, 75 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi
b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
Add ADSP node for MT8186 SoC.
Signed-off-by: Allen-KH Cheng
---
arch/arm64/boot/dts/mediatek/mt8186.dtsi | 20
1 file changed, 20 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi
b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
index a0b7dacc10cd
Add audio controller node for MT8186 SoC.
Signed-off-by: Allen-KH Cheng
---
arch/arm64/boot/dts/mediatek/mt8186.dtsi | 62
1 file changed, 62 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi
b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
index
Add DPI node for MT8186 SoC.
Signed-off-by: Allen-KH Cheng
Tested-by: Chen-Yu Tsai
---
arch/arm64/boot/dts/mediatek/mt8186.dtsi | 17 +
1 file changed, 17 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi
b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
index
Add ADSP mailbox node for MT8186 SoC.
Signed-off-by: Allen-KH Cheng
---
arch/arm64/boot/dts/mediatek/mt8186.dtsi | 14 ++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi
b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
index a8ff984f1192
Add display nodes and GCE info for MT8186 SoC. Also, add GCE
(Global Command Engine) properties to the display nodes in order to
enable the usage of the CMDQ (Command Queue), which is required for
operating the display.
Signed-off-by: Allen-KH Cheng
---
arch/arm64/boot/dts/mediatek/mt8186.dtsi
nding")
Signed-off-by: Allen-KH Cheng
Reviewed-by: Rob Herring
---
.../devicetree/bindings/display/mediatek/mediatek,ccorr.yaml| 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git
a/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
b/Documentation/
Add SPMI node for MT8186 SoC.
Signed-off-by: Allen-KH Cheng
---
arch/arm64/boot/dts/mediatek/mt8186.dtsi | 19 +++
1 file changed, 19 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi
b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
index 3d88480913eb..a8ff984f1192
The mt8186-spmi is used as compatible with mt8195-spmi on the MT8186,
document this situation.
Signed-off-by: Allen-KH Cheng
Reviewed-by: Rob Herring
---
.../devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml | 11 ---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a
This series is based on matthias github, for-next.
Changes since v1:
- Remove the unnecessary trailing number
- Add aliases for ovl* and rdma*
Allen-KH Cheng (9):
arm64: dts: mediatek: mt8186: Add MTU3 nodes
dt-bindings: spmi: spmi-mtk-pmif: Document mediatek,mt8195-spmi as
fallback of
Add DPI node for MT8186 SoC.
Signed-off-by: Allen-KH Cheng
---
arch/arm64/boot/dts/mediatek/mt8186.dtsi | 17 +
1 file changed, 17 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi
b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
index c52f9be1e750..eab30ab01572
Add ADSP node for MT8186 SoC.
Signed-off-by: Allen-KH Cheng
---
arch/arm64/boot/dts/mediatek/mt8186.dtsi | 20
1 file changed, 20 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi
b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
index a0b7dacc10cd
nding")
Signed-off-by: Allen-KH Cheng
---
.../devicetree/bindings/display/mediatek/mediatek,ccorr.yaml| 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git
a/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
b/Documentation/devicetree/bindings/displa
Add ADSP mailbox node for MT8186 SoC.
Signed-off-by: Allen-KH Cheng
---
arch/arm64/boot/dts/mediatek/mt8186.dtsi | 14 ++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi
b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
index a8ff984f1192
Add display nodes and GCE info for MT8186 SoC. Also, add GCE
(Global Command Engine) properties to the display nodes in order to
enable the usage of the CMDQ (Command Queue), which is required for
operating the display.
Signed-off-by: Allen-KH Cheng
---
arch/arm64/boot/dts/mediatek/mt8186.dtsi
The mt8186-spmi is used as compatible with mt8195-spmi on the MT8186,
document this situation.
Signed-off-by: Allen-KH Cheng
---
.../devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml | 11 ---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree
Add MTU3 nodes for MT8186 SoC.
Signed-off-by: Allen-KH Cheng
---
arch/arm64/boot/dts/mediatek/mt8186.dtsi | 75
1 file changed, 75 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi
b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
index c0a3afd55eaf
Add audio controller node for MT8186 SoC.
Signed-off-by: Allen-KH Cheng
---
arch/arm64/boot/dts/mediatek/mt8186.dtsi | 62
1 file changed, 62 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi
b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
index
This series is based on matthias github, for-next.
Allen-KH Cheng (9):
arm64: dts: mediatek: mt8186: Add MTU3 nodes
dt-bindings: spmi: spmi-mtk-pmif: Document mediatek,mt8195-spmi as
fallback of mediatek,mt8186-spmi
arm64: dts: mediatek: mt8186: Add SPMI node
arm64: dts: mediatek
Add SPMI node for MT8186 SoC.
Signed-off-by: Allen-KH Cheng
---
arch/arm64/boot/dts/mediatek/mt8186.dtsi | 19 +++
1 file changed, 19 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi
b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
index 3d88480913eb..a8ff984f1192
Like the ASUS T100HAN for which there is already a quirk,
the DynaBook K50 has a 800x1280 portrait screen mounted
in the tablet part of a landscape oriented 2-in-1.
Update the quirk to be more generic and apply to this device.
Signed-off-by: Allen Ballway
---
.../gpu/drm
Panel is 800x1280 but mounted on a detachable form factor sidways.
Signed-off-by: Allen Ballway
---
.../gpu/drm/drm_panel_orientation_quirks.c| 20 ---
1 file changed, 13 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c
b/drivers
From: allen chen
Currently there are no "upstream" users. So, no existing users to break.
Add properties to restrict dp output data-lanes and clock.
Signed-off-by: Pin-Yen Lin
Signed-off-by: Allen Chen
---
.../bindings/display/bridge/ite,it6505.yaml | 68 +--
1 fi
From: allen chen
Add driver to read data-lanes and link-frequencies from dt property to
restrict output bandwidth.
Signed-off-by: Allen chen
Signed-off-by: Pin-yen Lin
---
drivers/gpu/drm/bridge/ite-it6505.c | 80 +++--
1 file changed, 77 insertions(+), 3 deletions
5:
-Add a port and a endpoint.
-Move data-lanes property to the output endpoint.
Changes in v6:
-Modified data-lanes description by suggestion.
Changes in v7:
-Add commit messages to explain reason for breaking users.
allen chen (2):
dt-bindings: it6505: add properties to restrict output bandwid
From: allen chen
Add driver to read data-lanes and link-frequencies from dt property to
restrict output bandwidth.
Signed-off-by: Allen chen
Signed-off-by: Pin-yen Lin
---
drivers/gpu/drm/bridge/ite-it6505.c | 80 +++--
1 file changed, 77 insertions(+), 3 deletions
From: allen chen
Add properties to restrict dp output data-lanes and clock.
Signed-off-by: Pin-Yen Lin
Signed-off-by: Allen Chen
---
.../bindings/display/bridge/ite,it6505.yaml | 68 +--
1 file changed, 62 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree
5:
-Add a port and a endpoint.
-Move data-lanes property to the output endpoint.
Changes in v6:
-Modified data-lanes description by suggestion.
allen chen (2):
dt-bindings: it6505: add properties to restrict output bandwidth
drm/bridge: add it6505 driver to read data-lanes and link-fre
From: allen chen
Add driver to read data-lanes and link-frequencies from dt property to
restrict output bandwidth.
Signed-off-by: Allen chen
Signed-off-by: Pin-yen Lin
---
drivers/gpu/drm/bridge/ite-it6505.c | 80 +++--
1 file changed, 77 insertions(+), 3 deletions
From: allen chen
Add properties to restrict dp output data-lanes and clock.
Signed-off-by: Pin-Yen Lin
Signed-off-by: Allen Chen
---
.../bindings/display/bridge/ite,it6505.yaml | 89 +--
1 file changed, 83 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree
5:
-Add a port and a endpoint.
-Move data-lanes property to the output endpoint.
allen chen (2):
dt-bindings: it6505: add properties to restrict output bandwidth
drm/bridge: add it6505 driver to read data-lanes and link-frequencies
from dt
.../bindings/display/bridge/it
From: allen chen
Add properties to restrict dp output data-lanes and clock.
Signed-off-by: Pin-Yen Lin
Signed-off-by: Allen Chen
---
.../bindings/display/bridge/ite,it6505.yaml | 43 +++
1 file changed, 43 insertions(+)
diff --git a/Documentation/devicetree/bindings
From: allen chen
Add driver to read data-lanes and link-frequencies from dt property to
restrict output bandwidth.
Signed-off-by: Allen chen
Signed-off-by: Pin-yen Lin
---
drivers/gpu/drm/bridge/ite-it6505.c | 54 +++--
1 file changed, 51 insertions(+), 3 deletions
This series let driver can read properties from dt to restrict dp output
bandwidth.
Changes in v3:
-Rename property name.
Changes in v4:
-Use data-lanes and link-frequencies instead of "ite,dp-output-data-lane-count"
and "ite,dp-output-max-pixel-clock-mhz".
allen che
From: allen chen
Add driver to read data-lanes and max-pixel-clock-mhz from dt property to
restrict output bandwidth.
Signed-off-by: Allen chen
Signed-off-by: Pin-yen Lin
---
drivers/gpu/drm/bridge/ite-it6505.c | 36 ++---
1 file changed, 33 insertions(+), 3 deletions
From: allen chen
Add properties to restrict dp output data-lanes and clock.
Signed-off-by: Pin-Yen Lin
Signed-off-by: Allen Chen
---
.../bindings/display/bridge/ite,it6505.yaml | 12
1 file changed, 12 insertions(+)
diff --git a/Documentation/devicetree/bindings
From: allen chen
This series let driver can read properties from dt to restrict dp output
bandwidth.
Changes in v3:
-Rename property name.
allen chen (2):
dt-bindings: it6505: add properties to restrict output bandwidth
drm/bridge: add it6505 driver to read data-lanes and
max-pixel
From: allen chen
This series let driver can read properties from dt to restrict dp output
bandwidth.
allen chen (2):
dt-bindings: it6505: add properties to restrict output bandwidth
drm/bridge: add it6505 driver to read data-lanes and
max-pixel-clock-khz from dt
.../bindings/display
From: allen chen
Add properties to restrict dp output data-lanes and clock.
Signed-off-by: Pin-Yen Lin
Signed-off-by: Allen Chen
---
.../devicetree/bindings/display/bridge/ite,it6505.yaml | 10 ++
1 file changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings
From: allen chen
Add driver to read data-lanes and max-pixel-clock-khz from dt property to
restrict output bandwidth.
Signed-off-by: Allen chen
Signed-off-by: Pin-yen Lin
---
drivers/gpu/drm/bridge/ite-it6505.c | 35 ++---
1 file changed, 32 insertions(+), 3 deletions
k_dsi_poweroff() so that we have
>>> a working vblank irq during mtk_drm_crtc_atomic_disable() and stop
>>> getting vblank timeout warnings.
>>>
>>> Fixes: cde7e2e35c28 ("drm/mediatek: Separate poweron/poweroff from
>>> enable/disable and define new funcs")
>>> Signed-off-by: Nícolas F. R. A. Prado
>>>
>> Tested-by: Hsin-Yi Wang
>>
>
> Reviewed-by: AngeloGioacchino Del Regno
>
>
>
Tested suspend/resume work properly on mt8188 and mt8186 .
Tested-by: Allen-KH Cheng
Hi CK,
We can use [1] in mt8186. Please ignore this PATCH.
Thanks,
Allen
[1]
http://lists.infradead.org/pipermail/linux-mediatek/2022-August/046713.html
On 9/19/22 11:01, Allen-KH Cheng wrote:
> Hi CK,
>
> We will test this fix on the mt8186/mt8183.
> Maybe our fix is not neces
Hi CK,
We will test this fix on the mt8186/mt8183.
Maybe our fix is not necessary.
I appreciate your suggestion.
BRs,
Allen
On 9/18/22 12:32, Chun-Kuang Hu wrote:
> Hi, Allen:
>
> Allen-KH Cheng 於 2022年9月14日 週三 晚上10:00寫道：
>>
>> From: Xinlei Lee
>>
>> Ds
From: allen chen
Add driver to read data-lanes and max-pixel-clock-khz from dt property
to restrict output bandwidth.
Signed-off-by: Allen chen
Signed-off-by: Pin-yen Lin
---
drivers/gpu/drm/bridge/ite-it6505.c | 35 ++---
1 file changed, 32 insertions(+), 3 deletions
From: allen chen
Add properties to restrict dp output data-lanes and clock.
Signed-off-by: Pin-Yen Lin
Signed-off-by: Allen Chen
---
.../devicetree/bindings/display/bridge/ite,it6505.yaml | 10 ++
1 file changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings
From: allen chen
This series let driver can read properties from dt to restrict dp output
bandwidth.
allen chen (2):
dt-bindings: it6505: add properties to restrict output bandwidth
drm/bridge: add it6505 driver to read data-lanes and
max-pixel-clock-khz from dt
.../bindings/display
From: allen chen
Add properties to restrict dp output data-lanes and clock.
Signed-off-by: Pin-Yen Lin
Signed-off-by: Allen Chen
---
.../devicetree/bindings/display/bridge/ite,it6505.yaml | 10 ++
1 file changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings
From: allen chen
Use i2c bus to read/write when it6505 power off will occur i2c error.
Add this check will prevent i2c error when it6505 power off.
Signed-off-by: Pin-Yen Lin
Signed-off-by: Allen Chen
Reviewed-by: Robert Foss
---
drivers/gpu/drm/bridge/ite-it6505.c | 12 ++--
1 file
From: allen chen
Speed up video clock calculation and remove redundant video debug message.
Signed-off-by: Pin-Yen Lin
Signed-off-by: Allen Chen
Reviewed-by: Robert Foss
---
drivers/gpu/drm/bridge/ite-it6505.c | 6 ++
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers
From: allen chen
Change power sequence to meet it6505 data sheet requirement when boot on.
Signed-off-by: Pin-Yen Lin
Signed-off-by: Allen Chen
Reviewed-by: Robert Foss
---
drivers/gpu/drm/bridge/ite-it6505.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu
From: allen chen
This series fixes some it6505 driver bugs and improve computing time.
Changes in v2:
- Change committe message occure to occur.
allen chen (3):
drm/bridge: it6505: Modified power sequence
drm/bridge: it6505: Add i2c api power on check
drm/bridge: it6505: Modified
From: allen chen
Use i2c bus to read/write when it6505 power off will occur i2c error.
Add this check will prevent i2c error when it6505 power off.
Signed-off-by: Pin-Yen Lin
Signed-off-by: Allen Chen
Reviewed-by: Robert Foss
---
drivers/gpu/drm/bridge/ite-it6505.c | 12 ++--
1 file
From: allen chen
Speed up video clock calculation and remove redundant video debug message.
Signed-off-by: Pin-Yen Lin
Signed-off-by: Allen Chen
---
drivers/gpu/drm/bridge/ite-it6505.c | 6 ++
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/bridge/ite
From: allen chen
Use i2c bus to read/write when it6505 power off will occure i2c error.
Add this check will prevent i2c error when it6505 power off.
Signed-off-by: Pin-Yen Lin
Signed-off-by: Allen Chen
---
drivers/gpu/drm/bridge/ite-it6505.c | 12 ++--
1 file changed, 10 insertions
From: allen chen
Change power sequence to meet it6505 data sheet requirement when boot on.
Signed-off-by: Pin-Yen Lin
Signed-off-by: Allen Chen
---
drivers/gpu/drm/bridge/ite-it6505.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/ite-it6505.c
b
From: allen chen
This series fixes some it6505 driver bugs and improve computing time.
allen chen (3):
drm/bridge: it6505: Modified power sequence
drm/bridge: it6505: Add i2c api power on check
drm/bridge: it6505: Modified video clock calculation and video debug
message
drivers/gpu
From: allen chen
add read max-lane and max-pixel-clock from dt property
Signed-off-by: Allen Chen
Signed-off-by: Pin-yen Lin
---
drivers/gpu/drm/bridge/ite-it6505.c | 35 ++---
1 file changed, 32 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/bridge/ite
From: allen chen
add read max-lane and max-pixel-clock from dt property
Signed-off-by: Allen-kh Cheng
Signed-off-by: Pin-yen Lin
---
drivers/gpu/drm/bridge/ite-it6505.c | 35 ++---
1 file changed, 32 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/bridge
This adds support for the iTE IT6505.
This device can convert DPI signal to DP output.
From: Allen Chen
Tested-by: Hsin-yi Wang
Signed-off-by: Hermes Wu
Signed-off-by: Allen Chen
---
v10 -> v11 : remove drm_bridge_new_crtc_state
---
drivers/gpu/drm/bridge/Kconfig |8 +
drivers/
This adds support for the iTE IT6505.
This device can convert DPI signal to DP output.
From: Allen Chen
Tested-by: Hsin-yi Wang
Signed-off-by: Hermes Wu
Signed-off-by: Allen Chen
---
This patch depends on
https://patchwork.kernel.org/project/linux-mediatek/patch/20210722062246.2512666-4
This adds support for the iTE IT6505.
This device can convert DPI signal to DP output.
From: Allen Chen
Tested-by: Hsin-yi Wang
Signed-off-by: Hermes Wu
Signed-off-by: Allen Chen
---
v8->v9:
move aux register from probe to bridge_attach
add aux->drm_dev = bridge->dev
This patch d
This adds support for the iTE IT6505.
This device can convert DPI signal to DP output.
From: Allen Chen
Tested-by: Hsin-yi Wang
Signed-off-by: Hermes Wu
Signed-off-by: Allen Chen
v7->v8:
fixed "checkpatch --strict" error
remove unused variable *edid
remove mode_set() callback
Do
This adds support for the iTE IT6505.
This device can convert DPI signal to DP output.
From: Allen Chen
Tested-by: Hsin-yi Wang
Signed-off-by: Hermes Wu
Signed-off-by: Allen Chen
---
drivers/gpu/drm/bridge/Kconfig |7 +
drivers/gpu/drm/bridge/Makefile |1 +
drivers/gpu/drm
This adds support for the iTE IT6505.
This device can convert DPI signal to DP output.
From: Allen Chen
Signed-off-by: Jitao Shi
Signed-off-by: Pi-Hsun Shih
Signed-off-by: Yilun Lin
Signed-off-by: Hermes Wu
Signed-off-by: Allen Chen
---
drivers/gpu/drm/bridge/Kconfig |7 +
drivers
This adds support for the iTE IT6505.
This device can convert DPI signal to DP output.
From: Allen Chen
Signed-off-by: Jitao Shi
Signed-off-by: Pi-Hsun Shih
Signed-off-by: Yilun Lin
Signed-off-by: Hermes Wu
Signed-off-by: Allen Chen
---
drivers/gpu/drm/bridge/Kconfig |7 +
drivers
This adds support for the iTE IT6505.
This device can convert DPI signal to DP output.
From: Allen Chen
Signed-off-by: Jitao Shi
Signed-off-by: Pi-Hsun Shih
Signed-off-by: Yilun Lin
Signed-off-by: Hermes Wu
Signed-off-by: Allen Chen
---
drivers/gpu/drm/bridge/Kconfig |7 +
drivers
This adds support for the iTE IT6505.
This device can convert DPI signal to DP output.
From: Allen Chen
Signed-off-by: Jitao Shi
Signed-off-by: Pi-Hsun Shih
Signed-off-by: Yilun Lin
Signed-off-by: Hermes Wu
Signed-off-by: Allen Chen
---
drivers/gpu/drm/bridge/Kconfig |7
This adds support for the iTE IT6505.
This device can convert DPI signal to DP output.
From: Allen Chen
Signed-off-by: Jitao Shi
Signed-off-by: Pi-Hsun Shih
Signed-off-by: Yilun Lin
Signed-off-by: Hermes Wu
Signed-off-by: Allen Chen
Reported-by: kernel test robot
---
drivers/gpu/drm
This adds support for the iTE IT6505.
This device can convert DPI signal to DP output.
From: Allen Chen
Signed-off-by: Jitao Shi
Signed-off-by: Pi-Hsun Shih
Signed-off-by: Yilun Lin
Signed-off-by: Hermes Wu
Signed-off-by: Allen Chen
---
drivers/gpu/drm/bridge/Kconfig |7 +
drivers
On Wed, Aug 26, 2020 at 8:43 PM Kees Cook wrote:
>
> On Wed, Aug 26, 2020 at 12:55:28PM +0300, Dan Carpenter wrote:
> > On Wed, Aug 26, 2020 at 07:21:35AM +0530, Allen Pais wrote:
> > > On Thu, Aug 20, 2020 at 3:09 AM James Bottomley
> > > wrote:
> > > >
On Thu, Aug 20, 2020 at 3:09 AM James Bottomley
wrote:
>
> On Wed, 2020-08-19 at 21:54 +0530, Allen wrote:
> > > [...]
> > > > > Since both threads seem to have petered out, let me suggest in
> > > > > kernel.h:
> > >
'm using it so this would just be
> another macro of that type ...
>
So far we have a few which have been suggested as replacement
for from_tasklet()
- out_cast() or outer_cast()
- from_member().
- container_from() or from_container()
from_container() sounds fine, would trimming it a bit work? like from_cont().
--
- Allen
___
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
I objected to it. from_member()? Not
> > > great with naming... But I can see this going further and then we'll
> > > suddenly have tons of these. It's not good for readability.
> >
> > Since both threads seem to have petered out, let me suggest in
> >
> >
> > Signed-off-by: Romain Perier
> > Signed-off-by: Allen Pais
>
> This looks good to me.
>
> Reviewed-by: Corey Minyard
>
> Are you planning to push this, or do you want me to take it? If you
> want me to take it, what is the urgency?
Thanks. Well,
From: Allen Pais
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier
Signed-off-by: Allen Pais
---
drivers/input
From: Allen Pais
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly
and remove the .data field.
Signed-off-by: Romain Perier
Signed-off-by
From: Allen Pais
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier
Signed-off-by: Allen Pais
---
drivers/block
From: Allen Pais
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier
Signed-off-by: Allen Pais
---
drivers
From: Allen Pais
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier
Signed-off-by: Allen Pais
---
drivers/char
From: Allen Pais
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier
Signed-off-by: Allen Pais
---
arch/um
From: Allen Pais
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier
Signed-off-by: Allen Pais
---
drivers
From: Allen Pais
Update all the callbacks of all tasklets by using
from_tasklet() and remove .data field.
Signed-off-by: Romain Perier
Signed-off-by: Allen Pais
---
net/atm/pppoatm.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/net/atm/pppoatm.c b/net/atm/pppoatm.c
index 579b66da1d95
From: Allen Pais
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier
Signed-off-by: Allen Pais
---
drivers
From: Allen Pais
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier
Signed-off-by: Allen Pais
---
drivers/hsi
From: Allen Pais
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier
Signed-off-by: Allen Pais
---
drivers/hv
From: Allen Pais
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier
Signed-off-by: Allen Pais
---
drivers/s390
From: Allen Pais
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier
Signed-off-by: Allen Pais
---
drivers/ntb
From: Allen Pais
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier
Signed-off-by: Allen Pais
---
drivers
From: Allen Pais
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier
Signed-off-by: Allen Pais
---
drivers/misc
From: Allen Pais
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier
Signed-off-by: Allen Pais
---
drivers
From: Allen Pais
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier
Signed-off-by: Allen Pais
---
drivers/vme
From: Allen Pais
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier
Signed-off-by: Allen Pais
---
drivers/atm
This adds support for the iTE IT6505.
This device can convert DPI signal to DP output.
Signed-off-by: Jitao Shi
Signed-off-by: Pi-Hsun Shih
Signed-off-by: Yilun Lin
Signed-off-by: Hermes Wu
Signed-off-by: Allen Chen
---
drivers/gpu/drm/bridge/Kconfig |7 +
drivers/gpu/drm/bridge
compressed
digital audio content.
This series refactors previous it6505 driver and contains document bindings,
Kconfig to control the function enable or not.
allen (2):
ite-it6505 change trigger condition
WIP: drm/bridge: add it6505 driver
.../bindings/display/bridge/ite,it6505.yaml
1 - 100 of 159 matches
Mail list logo
