Hi Tomasz,
在 2017/2/20 10:40, Tomasz Figa 写道:
Hi Zain,
On Mon, Feb 13, 2017 at 6:27 PM, zain wang <w...@rock-chips.com> wrote:
The analogix_dp_transfer() will return -EBUSY if num_transferred is zero.
But sometimes we will send a bare address packet to start the transaction
Hi Sean,
Could you give some comments for this patch?
Thanks
Zain
在 2017/2/13 17:27, zain wang 写道:
The analogix_dp_transfer() will return -EBUSY if num_transferred is zero.
But sometimes we will send a bare address packet to start the transaction,
like drm_dp_i2c_xfer() show
urn num_transferred if num_transferred
equals msg->size.
Signed-off-by: zain wang <w...@rock-chips.com>
---
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
b/drivers/gp
We will ignored PSR setting if panel not support it. So, in this case, we should
return from analogix_dp_enable/disable_psr() without any error code.
Let's retrun 0 instead of -EINVAL when panel not support PSR in
analogix_dp_enable/disable_psr().
Signed-off-by: zain wang
---
Changes in v2
We will ignored PSR setting if panel not support it. So, in this case, we should
return from analogix_dp_enable/disable_psr() without any error code.
Let's retrun 0 instead of -EINVAL when panel not support PSR in
analogix_dp_enable/disable_psr().
Signed-off-by: zain wang
---
drivers/gpu/drm
Sharp lq123p1jx31 support 8bit bps.
Signed-off-by: zain wang
---
drivers/gpu/drm/panel/panel-simple.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c
b/drivers/gpu/drm/panel/panel-simple.c
index 113db3c..6b0c026 100644
--- a/drivers/gpu/drm/panel/panel
From: zain wang <w...@rock-chips.com>
make VOP standby when entry PSR to save some power.
Signed-off-by: zain wang
---
drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 29 ++---
drivers/gpu/drm/rockchip/rockchip_drm_drv.h | 1 +
drivers/gpu/drm/ro
From: zain wang <w...@rock-chips.com>
we would meet a short black screen when exit PSR with the full link
training, In this case, we should use fast link train instead of full
link training.
Signed-off-by: zain wang
---
drivers/gpu/drm/bridge/analogix/analogix_dp_core.
From: zain wang <w...@rock-chips.com>
turn off Main-link and power down eDP PHY when enable psr,
turn on Main-link and power up eDP PHY when disable psr.
Signed-off-by: zain wang
---
Changes in v3:
- detecting PSR state at enable/disable_psr() avoid to make link training
when sink in n
From: Yakir Yang <y...@rock-chips.com>
Make sure the request PSR state takes effect in analogix_dp_send_psr_spd()
function, or print the sink PSR error state if we failed to apply the
requested PSR setting.
Signed-off-by: zain wang
Signed-off-by: Yakir Yang
---
Changes in v3: None
C
From: zain wang <w...@rock-chips.com>
phy_power_on() and analogix_dp_init_dp would be called in bridge_eanble,
so remove them from analogix_dp_bind to be clear.
Signed-off-by: zain wang
---
Changes in v3:
- remove changes before
- remove phy_power_on() and analogix_dp_init_d
From: zain wang <w...@rock-chips.com>
There's a race between when bridge_disable and when vop_crtc_disable are called.
If the flush timer triggers a new psr work between these, we will operate eDP
without power shutdowned by bridge_disable.
In this case, moving activate/deactivate to
Yang (1):
drm/bridge: analogix_dp: detect Sink PSR state after configuring the
PSR
zain wang (5):
drm/bridge: analogix_dp: set psr activate/deactivate when
enable/disable bridge
drm/bridge: remove dp init from analogix_dp_bind
drm: bridge/analogix: switch Main-link and eDP PHY when
turn off Main-link and power down eDP PHY when enable psr,
turn on Main-link and power up eDP PHY when disable psr.
Signed-off-by: zain wang
---
Changes in v2:
- misc changes
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 124 -
1 file changed, 70 insertions(+), 54
From: Yakir Yang <y...@rock-chips.com>
Make sure the request PSR state takes effect in analogix_dp_send_psr_spd()
function, or print the sink PSR error state if we failed to apply the
requested PSR setting.
Signed-off-by: Yakir Yang
Signed-off-by: Zain Wang
---
Changes in v2: None
d
Signed-off-by: zain wang
---
Changes in v2: None
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index b4ce16a..1bd190e 100644
When disabled bridge, analogix_dp_enable_psr() may run due to timer was set
by rockchip_drm_do_flush(), in this case we should return -EBUSY.
Signed-off-by: zain wang
---
Changes in v2:
- add spin_lock to protect dpms_mode
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 43
: analogix_dp: detect Sink PSR state after configuring the
PSR
zain wang (3):
drm/bridge: analogix_dp: prevent runing enable_psr when disabled
bridge.
drm/bridge: analogix_dp: get sync PM when init eDP
drm: bridge/analogix: switch Main-link and eDP PHY when enable/disable
psr
turn off Main-link and power down eDP PHY when enable psr,
turn on Main-link and power up eDP PHY when disable psr.
Signed-off-by: zain wang
---
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 105 ++---
1 file changed, 52 insertions(+), 53 deletions(-)
diff --git
From: Yakir Yang <y...@rock-chips.com>
Make sure the request PSR state takes effect in analogix_dp_send_psr_spd()
function, or print the sink PSR error state if we failed to apply the
requested PSR setting.
Signed-off-by: Yakir Yang
Signed-off-by: Zain Wang
---
drivers/gpu/drm/
Signed-off-by: zain wang
---
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 206529a..026ec91 100644
--- a/drivers/gpu/drm
When disabled bridge, analogix_dp_enable_psr() may run due to timer was set
by rockchip_drm_do_flush(), in this case we should return -EBUSY.
Signed-off-by: zain wang
---
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 10 --
1 file changed, 8 insertions(+), 2 deletions(-)
diff
zain wang (3):
drm/bridge: analogix_dp: prevent runing enable_psr when disabled
bridge.
drm/bridge: analogix_dp: get sync PM when init eDP
drm: bridge/analogix: switch Main-link and eDP PHY when enable/disable
psr
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 107
23 matches
Mail list logo
