For a normal operation, the vdd supplies nor the stby GPIO is needed.
There are boards, where these voltages are statically enabled during
board power-up.
This means supply is still required.
You mean using fixed-regulator? I didn't consider that. But yes, you're
right.
-michael
On 02/12/2023 08:54, Tony Lindgren wrote:
> From: Michael Walle
>
> For a normal operation, the vdd supplies nor the stby GPIO is needed.
> There are boards, where these voltages are statically enabled during
> board power-up.
This means supply is still required.
>
> The reset pin is required
From: Michael Walle
For a normal operation, the vdd supplies nor the stby GPIO is needed.
There are boards, where these voltages are statically enabled during
board power-up.
The reset pin is required because once the PPI (PHY protocol interface)
is started, it can only be stopped by asserting t