On Wed, Apr 5, 2017 at 10:05 AM, Wladimir J. van der Laan
wrote:
> Ok, thanks for testing.
>
> To be clear: was this result with v3.x, or with mainline?
I tested with 4.11-rc5 and the kernel is driving the DVI monitor correctly.
___
dri-devel mailing l
On Wed, Apr 05, 2017 at 09:50:23AM -0300, Fabio Estevam wrote:
> On Sat, Apr 1, 2017 at 6:40 PM, Fabio Estevam wrote:
> > Hi Wladimir,
> >
> > On Fri, Mar 31, 2017 at 2:36 AM, Wladimir J. van der Laan
> > wrote:
> >
> >> - Went as far back as kernel v4.0, even to v3.12 or so (commit 493a863,
> >
On Sat, Apr 1, 2017 at 6:40 PM, Fabio Estevam wrote:
> Hi Wladimir,
>
> On Fri, Mar 31, 2017 at 2:36 AM, Wladimir J. van der Laan
> wrote:
>
>> - Went as far back as kernel v4.0, even to v3.12 or so (commit 493a863, "ARM:
>> dts: imx51-babbage: Make DVI and WVGA panel functional"). No differenc
On Sat, Apr 01, 2017 at 06:40:52PM -0300, Fabio Estevam wrote:
> Hi Wladimir,
>
> On Fri, Mar 31, 2017 at 2:36 AM, Wladimir J. van der Laan
> wrote:
>
> > - Went as far back as kernel v4.0, even to v3.12 or so (commit 493a863,
> > "ARM:
> > dts: imx51-babbage: Make DVI and WVGA panel function
Hi Wladimir,
On Fri, Mar 31, 2017 at 2:36 AM, Wladimir J. van der Laan
wrote:
> - Went as far back as kernel v4.0, even to v3.12 or so (commit 493a863, "ARM:
> dts: imx51-babbage: Make DVI and WVGA panel functional"). No difference. So
> nothing to
> bisect, unfortunately.
It was a long ti
Hello Philipp,
> Looking at the hardware user's guide [1] chapter 9 (VGA and DVI out), I
> notice that the TFP410PA bridge seems to be connected to the DISP2_DAT
> data lines, but uses the DISP1_H/V sync signals (which I can't believe
> is right), according to figure 9-1. But the device tree pin
>
Hi Wladimir,
On Fri, 2017-03-31 at 07:36 +0200, Wladimir J. van der Laan wrote:
> Hello,
>
> I can't get the DVI output to work on a i.MX51 EVP board (babbage). There
> seems to be no signal at all. The board is running the mainline kernel
> 4.11.0-rc4 as of a
> day ago (89970a0).
>
> - The con
Hello,
I can't get the DVI output to work on a i.MX51 EVP board (babbage). There
seems to be no signal at all. The board is running the mainline kernel
4.11.0-rc4 as of a
day ago (89970a0).
- The connector and cable works. u-boot (v2016.07-rc2) shows a penguin at boot.
However while the Linux