On Wed, Nov 05, 2014 at 12:57:38PM +0530, Sudip Mukherjee wrote:
> On Tue, Nov 04, 2014 at 11:48:26PM +0200, Aya Mahfouz wrote:
> > On Tue, Nov 04, 2014 at 03:06:53PM +0530, Sudip Mukherjee wrote:
> > > On Tue, Nov 04, 2014 at 02:13:19AM +0200, Aya Mahfouz wrote:
> > > > This patch replaces dev_err
The dgap_init_global() initialize the dgap_board
that is a global variable as static and dgap_poll_timer.
But init_timer() is called twice in dgap_start() and dgap_board
doesn't need to be initialized to NULL.
Signed-off-by: Daeseok Youn
---
drivers/staging/dgap/dgap.c | 23 ---
On Tue, Nov 04, 2014 at 09:39:58PM +0800, Andy Yan wrote:
> From: Andy yan
Leave this out. It's for when you are forwarding a patch from someone
else. Also it has a typo and your email From: header is correct.
>
> the original imx hdmi driver is under staging/imx-drm,
> which depends on imx-d
On 04/11/2014 18:44, Hartley Sweeten wrote:
On Tuesday, November 04, 2014 11:09 AM, Ian Abbott wrote:
This series of patches adds a couple of ioctl codes to the Comedi core
to allow the current "read" and "write" subdevice to be changed after
opening the comedi device. The current read and writ
Em Tue, 4 Nov 2014 02:13:19 +0200
Aya Mahfouz escreveu:
> This patch replaces dev_err by pr_err since the value
> of ir is NULL when the message is displayed.
This one doesn't apply at the media tree:
diff --git a/drivers/staging/media/lirc/lirc_zilog.c
b/drivers/staging/media/lirc/lirc_zilog.
Em Tue, 4 Nov 2014 23:43:07 +0200
Aya Mahfouz escreveu:
> This patches replaces one pr_debug call by dev_dbg and
> changes the device used by one of the dev_err calls.
Also doesn't apply. Probably made to apply on Greg's tree.
Regards,
Mauro
>
> Signed-off-by: Aya Mahfouz
> ---
> drivers/st
On Tue, Nov 04, 2014 at 10:47:19PM +0100, Mariusz Gorski wrote:
> Fix the implementation of a single-open policy for both
> devices (lcd and keypad) by using atomic_t instead of plain ints.
>
This seems like it might be a real life bug that you have experienced?
The changelog should tell the use
On 04/11/14 16:50, H Hartley Sweeten wrote:
Remove the private data member 'ai_sample_count' and use the comedi_async
'scans_done' member to detect the end-of-acquisition.
Also, remove the unnecessary COMEDI_CB_EOS event. The core automatically
detects and adds that event.
Signed-off-by: H Hart
On 04/11/14 16:50, H Hartley Sweeten wrote:
Remove the private data member 'ai_sample_count' and use the comedi_async
'scans_done' member to detect the analog input end-of-acquisition.
Move the EOA check so it happens after adding the samples from the current
urb to the async buffer. This preven
On 04/11/14 16:50, H Hartley Sweeten wrote:
Introduce a new member to comedi_async to count the number of scans completed.
This member is cleared by comedi_buf_reset() along with the other comedi_async
members. It is incremented in comedi_inc_scan_progress() when the end of scan
is detected.
Thi
On Tue, Nov 04, 2014 at 11:43:07PM +0200, Aya Mahfouz wrote:
> This patches replaces one pr_debug call by dev_dbg and
> changes the device used by one of the dev_err calls.
i think you should mention in the commit message why you are changing the
device.
and also for revised patch its better if y
This is a patch to the rtw_cmd.c file that fixes
Error reported by checkpatch.
Signed-off-by: Sanjeev Sharma
---
Changes in v2:
- Shorten variable name by taking temporary structure
drivers/staging/rtl8723au/core/rtw_cmd.c | 126 +++
1 file changed, 62 insertions(
On 04/11/14 16:50, H Hartley Sweeten wrote:
Remove the private data member 'ai_sample_count' and use the comedi_async
'scans_done' member to detect the analog input end-of-acquisition.
Move the EOA check so it happens after adding the samples from the current
urb to the async buffer. This preven
-Original Message-
From: Jes Sorensen [mailto:jes.soren...@redhat.com]
Sent: Thursday, October 30, 2014 8:21 PM
To: Sharma, Sanjeev
Cc: Joe Perches; larry.fin...@lwfinger.net; gre...@linuxfoundation.org;
linux-wirel...@vger.kernel.org; de...@driverdev.osuosl.org;
linux-ker...@vger.kernel
On 04/11/14 17:00, H Hartley Sweeten wrote:
Introduce a helper function to determine the number of scans left in
the async command.
Signed-off-by: H Hartley Sweeten
Cc: Ian Abbott
Cc: Greg Kroah-Hartman
---
drivers/staging/comedi/comedidev.h | 2 ++
drivers/staging/comedi/drivers.c | 39
On Wed, Nov 05, 2014 at 01:19:10PM +0300, Dan Carpenter wrote:
> On Tue, Nov 04, 2014 at 10:47:19PM +0100, Mariusz Gorski wrote:
> > Fix the implementation of a single-open policy for both
> > devices (lcd and keypad) by using atomic_t instead of plain ints.
> >
>
> This seems like it might be a
On 04/11/14 17:00, H Hartley Sweeten wrote:
This series converts the remaining comedi drivers to use the comedi_async
'scans_done' member to count the number of scans completed when counting
scans with a cmd->stop_src of TRIG_COUNT.
H Hartley Sweeten (13):
staging: comedi: drivers: introduce
On 04/11/14 16:50, H Hartley Sweeten wrote:
The comedi drivers that support async commands with a cmd->stop_src of
TRIG_COUNT
currently have a private data member that is used to count the number of scans
completed in order to detect the end of acquisition for the command.
This series addes a n
imx6 and rockchip rk3288 and JZ4780 (Ingenic Xburst/MIPS)
use the interface compatible Designware HDMI IP, but they
also have some lightly difference, such as phy pll configuration,
register width(imx hdmi register is one byte, but rk3288 is 4
bytes width), 4K support(imx6 doesn't support 4k, but r
We found freescale imx6 and rockchip rk3288 and Ingenic JZ4780 (Xburst/MIPS)
use the interface compatible Designware HDMI IP, but they also have some
lightly difference, such as phy pll configuration, register width(imx hdmi
register is one byte, but rk3288 is 4 bytes width and can only access by w
the original imx hdmi driver is under staging/imx-drm,
which depends on imx-drm, so move the imx hdmi drvier out
to drm/bridge and rename imx-hdmi to dw-hdmi
Signed-off-by: Andy Yan
---
drivers/gpu/drm/bridge/Kconfig | 5 +
drivers/gpu/drm/bridge/Makefile
imx6 and rockchip rk3288 and JZ4780 (Ingenic Xburst/MIPS)
use the interface compatible Designware HDMI IP, but they
also have some lightly difference, such as phy pll configuration,
register width(imx hdmi register is one byte, but rk3288 is 4
bytes width), 4K support(imx6 doesn't support 4k, but r
This one patch does too much to be reviewed easily.
One patch is supposed to modify/add one thing at a time in the kernel.
Separating platform specific code from imx-drm/imx-hdmi is one thing.
Adding support for multi-byte register access is something different.
i.e. Something like.
1/3 split
On Wed, Nov 05, 2014 at 04:59:15PM +0530, Sudip Mukherjee wrote:
> On Tue, Nov 04, 2014 at 11:43:07PM +0200, Aya Mahfouz wrote:
> > This patches replaces one pr_debug call by dev_dbg and
> > changes the device used by one of the dev_err calls.
>
> i think you should mention in the commit message w
Hi Andy,
I think separating the core from the SoC specific part is a good step
into the right direction.
Am Mittwoch, den 05.11.2014, 20:55 +0800 schrieb Andy Yan:
> imx6 and rockchip rk3288 and JZ4780 (Ingenic Xburst/MIPS)
> use the interface compatible Designware HDMI IP, but they
> also have s
On Wed, Nov 05, 2014 at 08:17:11AM -0200, Mauro Carvalho Chehab wrote:
> Em Tue, 4 Nov 2014 23:43:07 +0200
> Aya Mahfouz escreveu:
>
> > This patches replaces one pr_debug call by dev_dbg and
> > changes the device used by one of the dev_err calls.
>
> Also doesn't apply. Probably made to apply
On 04/11/14 17:53, H Hartley Sweeten wrote:
Following is the big cleanup series for the ADDI-DATA APCI-3120 driver.
Quick summary of the cleanup:
* Removes all the CamelCase
* Cleans up the register map defines
* Fixes the Analog Input subdevice
* Fixes the async command support for
Hi Sakari,
On Wed, 5 Nov 2014 16:57:27 +0200
Sakari Ailus wrote:
> Hi Boris,
>
> On Tue, Nov 04, 2014 at 10:54:57AM +0100, Boris Brezillon wrote:
> > In order to have subsytem agnostic media bus format definitions we've
> > moved media bus definition to include/uapi/linux/media-bus-format.h and
Hi,
On Tue, Nov 04, 2014 at 12:09:59PM +0100, Hans Verkuil wrote:
> Well, I gave two alternatives :-)
>
> Both are fine as far as I am concerned, but it would be nice to hear
> what others think.
In fact I think both are good options. :-)
I'd perhaps lean towards the latter, for it has the bene
Hi Boris,
On Tue, Nov 04, 2014 at 10:54:57AM +0100, Boris Brezillon wrote:
> In order to have subsytem agnostic media bus format definitions we've
> moved media bus definition to include/uapi/linux/media-bus-format.h and
> prefixed enum values with MEDIA_BUS_FMT instead of V4L2_MBUS_FMT.
>
> Upda
Hi Boris,
On Tue, Nov 04, 2014 at 10:55:06AM +0100, Boris Brezillon wrote:
> The v4l2_mbus_pixelcode enum (or its values) should be replaced by the
> media_bus_format enum.
> Keep this enum in v4l2-mediabus.h and create a new header containing
> the v4l2_mbus_framefmt struct definition (which is n
On Wed, 5 Nov 2014 17:08:15 +0200
Sakari Ailus wrote:
> Hi Boris,
>
> On Tue, Nov 04, 2014 at 10:55:06AM +0100, Boris Brezillon wrote:
> > The v4l2_mbus_pixelcode enum (or its values) should be replaced by the
> > media_bus_format enum.
> > Keep this enum in v4l2-mediabus.h and create a new head
On Tue, Nov 04, 2014 at 10:54:58AM +0100, Boris Brezillon wrote:
> Replace references to the v4l2_mbus_pixelcode enum with the new
> media_bus_format enum in all common headers.
>
> Signed-off-by: Boris Brezillon
Acked-by: Sakari Ailus
--
Sakari Ailus
e-mail: sakari.ai...@iki.fi XMPP: sai
On 11/05/14 16:15, Boris Brezillon wrote:
> On Wed, 5 Nov 2014 17:08:15 +0200
> Sakari Ailus wrote:
>
>> Hi Boris,
>>
>> On Tue, Nov 04, 2014 at 10:55:06AM +0100, Boris Brezillon wrote:
>>> The v4l2_mbus_pixelcode enum (or its values) should be replaced by the
>>> media_bus_format enum.
>>> Kee
Hi Boris,
On Wed, Nov 05, 2014 at 04:15:38PM +0100, Boris Brezillon wrote:
> On Wed, 5 Nov 2014 17:08:15 +0200
> Sakari Ailus wrote:
> > I would keep the original file name, even if the compatibility definitions
> > are there. I don't see any harm in having them around as well.
> >
>
> That's t
On Wed, 05 Nov 2014 16:19:56 +0100
Hans Verkuil wrote:
>
>
> On 11/05/14 16:15, Boris Brezillon wrote:
> > On Wed, 5 Nov 2014 17:08:15 +0200
> > Sakari Ailus wrote:
> >
> >> Hi Boris,
> >>
> >> On Tue, Nov 04, 2014 at 10:55:06AM +0100, Boris Brezillon wrote:
> >>> The v4l2_mbus_pixelcode enum
On Wed, 5 Nov 2014 17:00:25 +0200
Sakari Ailus wrote:
> Hi,
>
> On Tue, Nov 04, 2014 at 12:09:59PM +0100, Hans Verkuil wrote:
> > Well, I gave two alternatives :-)
> >
> > Both are fine as far as I am concerned, but it would be nice to hear
> > what others think.
>
> In fact I think both are g
On 11/05/14 16:30, Boris Brezillon wrote:
> On Wed, 05 Nov 2014 16:19:56 +0100
> Hans Verkuil wrote:
>
>>
>>
>> On 11/05/14 16:15, Boris Brezillon wrote:
>>> On Wed, 5 Nov 2014 17:08:15 +0200
>>> Sakari Ailus wrote:
>>>
Hi Boris,
On Tue, Nov 04, 2014 at 10:55:06AM +0100, Boris Bre
From: Ken Depro
This patch removes extra blank lines from the virthba header and source
files. This is the first of a set of patches that will clean up the
virthba source file. The only checkpatch issue in the header file was
the blank line warnings.
Signed-off-by: Ken Depro
Signed-off-by: Be
Kernel space allocations can fail. This patch
fixes a crash condition upon allocation failure.
Should this condition occur init_firmware() will
goto its error handler and declare download failure.
Of interesting note is that prior to this patch
fw_download_code() could never fail yet our caller
c
On Wed, Nov 05, 2014 at 05:05:03PM +0530, Sanjeev Sharma wrote:
> This is a patch to the rtw_cmd.c file that fixes
> Error reported by checkpatch.
What error are you "fixing"? Please be specific.
thanks,
greg k-h
___
devel mailing list
de...@linuxdriv
On Wed, Nov 05, 2014 at 03:43:44PM +0200, Aya Mahfouz wrote:
> On Wed, Nov 05, 2014 at 08:17:11AM -0200, Mauro Carvalho Chehab wrote:
> > Em Tue, 4 Nov 2014 23:43:07 +0200
> > Aya Mahfouz escreveu:
> >
> > > This patches replaces one pr_debug call by dev_dbg and
> > > changes the device used by o
On Wednesday, November 05, 2014 4:25 AM, Ian Abbott wrote:
> On 04/11/14 16:50, H Hartley Sweeten wrote:
>> Introduce a new member to comedi_async to count the number of scans
>> completed.
>> This member is cleared by comedi_buf_reset() along with the other
>> comedi_async
>> members. It is incr
Caro usuário
Seu e-mail ultrapassou 2 GB criados pelo webmaster, que está atualmente em
execução no 2.30GB, o que não é possível enviar ou receber nova mensagem dentro
das próximas 24 horas, até que você verifique se você enviar e-mail da conta.
Por favor, informe seus dados abaixo para ver
On Wed, 2014-11-05 at 17:05 +0530, Sanjeev Sharma wrote:
> This is a patch to the rtw_cmd.c file that fixes
> Error reported by checkpatch.
Please run your patches through checkpatch before
sending them.
WARNING: suspect code indent for conditional statements (24, 24)
#178: FILE: drivers/staging/
Remove the private data member 'stop_count' and use the comedi_async
'scans_done'
member to detect the end-of-acquisition.
Signed-off-by: H Hartley Sweeten
Reviewed-by: Ian Abbott
Cc: Greg Kroah-Hartman
---
drivers/staging/comedi/drivers/addi_apci_2032.c | 17 +
1 file changed
Remove the private data member 'stopcount' and use the comedi_async 'scans_done'
member to detect the end-of-acquisition.
Signed-off-by: H Hartley Sweeten
Reviewed-by: Ian Abbott
Cc: Greg Kroah-Hartman
---
drivers/staging/comedi/drivers/amplc_dio200_common.c | 14 +++---
1 file changed
Introduce a new member to comedi_async to count the number of scans completed.
This member is cleared by comedi_buf_reset() along with the other comedi_async
members. It is incremented in comedi_inc_scan_progress() when the end of scan
is detected.
This member will be used to clean up the scan cou
Remove the private data member 'ntrig' and use the comedi_async 'scans_done'
member to detect the end-of-acquisition.
Signed-off-by: H Hartley Sweeten
Reviewed-by: Ian Abbott
Cc: Greg Kroah-Hartman
---
drivers/staging/comedi/drivers/pcl711.c | 16 ++--
1 file changed, 6 insertions(
The comedi drivers that support async commands with a cmd->stop_src of
TRIG_COUNT
currently have a private data member that is used to count the number of scans
completed in order to detect the end of acquisition for the command.
This series addes a new member, 'scans_done', to comedi_async and m
Remove the private data member 'ai_act_scan' and use the comedi_async
'scans_done' member to detect the end-of-acquisition.
Signed-off-by: H Hartley Sweeten
Reviewed-by: Ian Abbott
Cc: Greg Kroah-Hartman
---
drivers/staging/comedi/drivers/pcl812.c | 9 +
1 file changed, 1 insertion(+),
Remove the private data member 'stop_count' and use the comedi_async
'scans_done'
member to detect the end-of-acquisition.
Signed-off-by: H Hartley Sweeten
Reviewed-by: Ian Abbott
Cc: Greg Kroah-Hartman
---
drivers/staging/comedi/drivers/pcmuio.c | 14 +++---
1 file changed, 3 inserti
Remove the private data member 'count' and use the comedi_async 'scans_done'
member to detect the end-of-acquisition.
Signed-off-by: H Hartley Sweeten
Reviewed-by: Ian Abbott
Cc: Greg Kroah-Hartman
---
drivers/staging/comedi/drivers/pcmmio.c | 12 +++-
1 file changed, 3 insertions(+),
Remove the private data member 'ai_act_scan' and use the comedi_async
'scans_done' member to detect the end-of-acquisition.
Signed-off-by: H Hartley Sweeten
Reviewed-by: Ian Abbott
Cc: Greg Kroah-Hartman
---
drivers/staging/comedi/drivers/pcl816.c | 9 +
1 file changed, 1 insertion(+),
Remove the private data member 'ai_act_scan' and use the comedi_async
'scans_done' member to detect the end-of-acquisition.
Signed-off-by: H Hartley Sweeten
Reviewed-by: Ian Abbott
Cc: Greg Kroah-Hartman
---
drivers/staging/comedi/drivers/adv_pci1710.c | 26 +-
1 file c
Remove the private data member 'ao_sample_count' and use the comedi_async
'scans_done' member to detect the analog output end-of-acquisition.
Signed-off-by: H Hartley Sweeten
Reviewed-by: Ian Abbott
Cc: Greg Kroah-Hartman
---
drivers/staging/comedi/drivers/usbduxsigma.c | 30 --
Remove the private data member 'ai_act_scan' and use the comedi_async
'scans_done' member to detect the end-of-acquisition.
Signed-off-by: H Hartley Sweeten
Reviewed-by: Ian Abbott
Cc: Greg Kroah-Hartman
---
drivers/staging/comedi/drivers/pcl818.c | 15 ++-
1 file changed, 6 insert
Remove the private data member 'ai_sample_count' and use the comedi_async
'scans_done' member to detect the end-of-acquisition.
Also, remove the unnecessary COMEDI_CB_EOS event. The core automatically
detects and adds that event.
Signed-off-by: H Hartley Sweeten
Cc: Ian Abbott
Cc: Greg Kroah-Ha
Remove the private data member 'count' and use the comedi_async 'scans_done'
member to detect the end-of-acquisition.
Signed-off-by: H Hartley Sweeten
Reviewed-by: Ian Abbott
Cc: Greg Kroah-Hartman
---
drivers/staging/comedi/drivers/das800.c | 31 ---
1 file changed
Remove the private data member 'ai_AiActualScan' and use the comedi_async
'scans_done' member to detect the end-of-acquisition.
The function v_APCI3120_InterruptDmaMoveBlock16bit() is then just a wrapper
for comedi_buf_write_samples(). Remove it.
Signed-off-by: H Hartley Sweeten
Reviewed-by: Ian
Remove the private data member 'ai_sample_count' and use the comedi_async
'scans_done' member to detect the analog input end-of-acquisition.
Move the EOA check so it happens after adding the samples from the current
urb to the async buffer. This prevents the unnecessary resubmit of the urb
when th
Remove the private data member 'ao_sample_count' and use the comedi_async
'scans_done' member to detect the analog output end-of-acquisition.
Signed-off-by: H Hartley Sweeten
Reviewed-by: Ian Abbott
Cc: Greg Kroah-Hartman
---
drivers/staging/comedi/drivers/usbdux.c | 29 ---
This member of the private data is set to '0' but never used. Remove it.
Signed-off-by: H Hartley Sweeten
Reviewed-by: Ian Abbott
Cc: Greg Kroah-Hartman
---
drivers/staging/comedi/drivers/pcl818.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/staging/comedi/drivers/pcl818.c
b/d
Remove the private data member 'ai_sample_count' and use the comedi_async
'scans_done' member to detect the analog input end-of-acquisition.
Move the EOA check so it happens after adding the samples from the current
urb to the async buffer. This prevents the unnecessary resubmit of the urb
when th
On 05/11/2014 17:20, H Hartley Sweeten wrote:
The comedi drivers that support async commands with a cmd->stop_src of
TRIG_COUNT
currently have a private data member that is used to count the number of scans
completed in order to detect the end of acquisition for the command.
This series addes a
Introduce a helper function to calculate the number of samples remaining
when the cmd->stop_src is TRIG_COUNT.
Signed-off-by: H Hartley Sweeten
Reviewed-by: Ian Abbott
Cc: Greg Kroah-Hartman
---
drivers/staging/comedi/comedidev.h | 2 ++
drivers/staging/comedi/drivers.c | 32 +++
Remove the private data member 'ai_count' and use the comedi_async 'scans_done'
member to detect the analog output end-of-acquisition.
Use the helper function comedi_nscans_left() to get the number of scans in the
async buffer of left in the command.
Signed-off-by: H Hartley Sweeten
Reviewed-by:
Remove the private data member 'ai_count' and use the comedi_async 'scans_done'
member to detect the end-of-acquisition.
Use the helper function comedi_nscans_left() to check if the number of scans
left in the command.
Signed-off-by: H Hartley Sweeten
Reviewed-by: Ian Abbott
Cc: Greg Kroah-Hart
This series converts the remaining comedi drivers to use the comedi_async
'scans_done' member to count the number of scans completed when counting
scans with a cmd->stop_src of TRIG_COUNT.
v2: Fix PATCH 01/13 as pointed out by Ian Abbott
H Hartley Sweeten (13):
staging: comedi: drivers: introdu
Remove the private data member 'ao_stop_count' and use the comedi_async
'scans_done' member to detect the end-of-acquisition.
Use the helper function comedi_nscans_left() to determine the number of scans
available in the async buffer or left in the command.
Signed-off-by: H Hartley Sweeten
Revie
Remove the private data member 'count' and use the comedi_async 'scans_done'
member to detect the analog input end-of-acquisition.
Use the comedi_nsamples_left() helper to get the number of samples to actually
add to the async buffer.
Signed-off-by: H Hartley Sweeten
Reviewed-by: Ian Abbott
Cc:
Remove the private data member 'ao_count' and use the comedi_async 'scans_done'
member to detect the analog output end-of-acquisition.
Use the comedi_nsamples_left() helper to get the number of samples to actually
read from the async buffer.
Signed-off-by: H Hartley Sweeten
Reviewed-by: Ian Abbo
Remove the private data member 'ai_count' and use the comedi_async 'scans_done'
member to detect the analog output end-of-acquisition.
Use the comedi_nsamples_left() helper to get the number of samples to actually
add to the async buffer.
Signed-off-by: H Hartley Sweeten
Reviewed-by: Ian Abbott
Remove the private data member 'ai_sample_count' and use the comedi_async
'scans_done' member to detect the analog input end-of-acquisition.
Use the comedi_nsamples_left() helper to get the number of samples to actually
add to the async buffer.
Signed-off-by: H Hartley Sweeten
Reviewed-by: Ian A
Introduce a helper function to determine the number of scans left in
the async command.
Signed-off-by: H Hartley Sweeten
Cc: Ian Abbott
Cc: Greg Kroah-Hartman
---
drivers/staging/comedi/comedidev.h | 2 ++
drivers/staging/comedi/drivers.c | 39 ++
2 files
Remove the private data member 'ao_count' and use the comedi_async 'scans_done'
member to detect the analog output end-of-acquisition.
Use the comedi_nsamples_left() helper to get the number of samples to actually
read from the async buffer.
Signed-off-by: H Hartley Sweeten
Reviewed-by: Ian Abbo
Remove the private data member 'count' and use the comedi_async 'scans_done'
member to detect the end-of-acquisition.
Signed-off-by: H Hartley Sweeten
Reviewed-by: Ian Abbott
Cc: Greg Kroah-Hartman
---
drivers/staging/comedi/drivers/quatech_daqp_cs.c | 27
1 file chang
Remove the private data member 'count' and use the comedi_async 'scans_done'
member to detect the end-of-acquisition.
Use the comedi_nsamples_left() helper to get the number of samples to actually
add to the async buffer.
Signed-off-by: H Hartley Sweeten
Reviewed-by: Ian Abbott
Cc: Greg Kroah-H
Remove the private data member 'ai_scan_count' and use the comedi_async
'scans_done'
member to detect the analog input end-of-acquisition.
Use the comedi_nsamples_left() helper to work out the number of 'wake' samples
in
pci230_ai_update_fifo_trigger_level() and the number of 'todo' samples actu
Delete the following unused types, and unused function prototypes:
VISORCHIPSET_SWITCH_INFO
VISORCHIPSET_EXTERNALPORT_INFO
VISORCHIPSET_INTERNALPORT_INFO
visorchipset_get_switch_info()
visorchipset_get_externalport_info()
Signed-off-by: Benjamin Romer
---
drivers/staging/unisys/visorchipset/vis
Delete uislib_client_add_vnic() and uislib_client_delete_vnic(), since these
are never used.
Signed-off-by: Benjamin Romer
---
drivers/staging/unisys/uislib/uislib.c | 76 --
1 file changed, 76 deletions(-)
diff --git a/drivers/staging/unisys/uislib/uislib.c
b/d
On Wednesday, November 05, 2014 7:48 AM, Ian Abbott wrote:
> On 04/11/14 17:53, H Hartley Sweeten wrote:
>> Following is the big cleanup series for the ADDI-DATA APCI-3120 driver.
>>
>> Quick summary of the cleanup:
>>
>>* Removes all the CamelCase
>>* Cleans up the register map defines
>>
On Wednesday, November 05, 2014 4:08 AM, Ian Abbott wrote:
> On 04/11/14 16:50, H Hartley Sweeten wrote:
>> Remove the private data member 'ai_sample_count' and use the comedi_async
>> 'scans_done' member to detect the end-of-acquisition.
>>
>> Also, remove the unnecessary COMEDI_CB_EOS event. The
On Tue, Nov 04, 2014 at 11:25:14AM -0500, Benjamin Romer wrote:
> Add a comment to the charqueue's spinlock to explain that it is a lock for the
> structure.
>
> Signed-off-by: Benjamin Romer
> ---
> drivers/staging/unisys/visorutil/charqueue.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletio
On Wed, Nov 05, 2014 at 12:47:49PM -0500, Benjamin Romer wrote:
> Delete the following unused types, and unused function prototypes:
>
> VISORCHIPSET_SWITCH_INFO
> VISORCHIPSET_EXTERNALPORT_INFO
> VISORCHIPSET_INTERNALPORT_INFO
> visorchipset_get_switch_info()
> visorchipset_get_externalport_info(
On Mon, Nov 03, 2014 at 04:13:55PM -0800, Greg KH wrote:
> On Mon, Nov 03, 2014 at 04:04:42PM -0800, steph wrote:
> > On Mon, Nov 03, 2014 at 01:21:39PM -0800, Greg KH wrote:
> > > On Mon, Nov 03, 2014 at 12:42:48PM -0800, Stephanie Wallick wrote:
[snip]
> > > > +static int mausb_hcd_init(void)
>
From: Ken Depro
This patch removes unneeded spaces after casts within the virthba.c
file. The checkpatch script was run after these changes, and no
"remove spaces after casts" checks were generated.
Later patches will fix the other checkpatch warnings/checks.
Signed-off-by: Ken Depro
---
dri
On Wed, Nov 05, 2014 at 12:14:33PM -0800, sostalle wrote:
> On Mon, Nov 03, 2014 at 04:13:55PM -0800, Greg KH wrote:
> > On Mon, Nov 03, 2014 at 04:04:42PM -0800, steph wrote:
> > > On Mon, Nov 03, 2014 at 01:21:39PM -0800, Greg KH wrote:
> > > > On Mon, Nov 03, 2014 at 12:42:48PM -0800, Stephanie
On Fri, Oct 31, 2014 at 11:00:54PM +, Ian Abbott wrote:
> On 31/10/14 22:53, Ian Abbott wrote:
> >I like the idea of the core comedi module being separated from all the
> >various buses. And other buses can be added easily without pulling extra
> >dependencies into the core (e.g. for platform o
On Thu, Nov 06, 2014 at 01:11:17AM +0900, Daniel Dressler wrote:
> Kernel space allocations can fail. This patch
> fixes a crash condition upon allocation failure.
>
> Should this condition occur init_firmware() will
> goto its error handler and declare download failure.
>
> Of interesting note i
On Wed, Nov 05, 2014 at 04:04:32PM -0500, Ken Depro wrote:
> From: Ken Depro
>
> This patch removes unneeded spaces after casts within the virthba.c
> file. The checkpatch script was run after these changes, and no
> "remove spaces after casts" checks were generated.
>
> Later patches will fix
On Wednesday, November 05, 2014 3:51 PM, Greg Kroah-Hartman wrote:
> On Fri, Oct 31, 2014 at 11:00:54PM +, Ian Abbott wrote:
>> On 31/10/14 22:53, Ian Abbott wrote:
>>> I like the idea of the core comedi module being separated from all the
>>> various buses. And other buses can be added easily
-Original Message-
From: Joe Perches [mailto:j...@perches.com]
Sent: Wednesday, November 05, 2014 10:46 PM
To: Sharma, Sanjeev
Cc: larry.fin...@lwfinger.net; jes.soren...@redhat.com;
gre...@linuxfoundation.org; linux-wirel...@vger.kernel.org;
de...@driverdev.osuosl.org; linux-ker...@vger
This is a patch to the rtw_cmd.c file that fixes following
error.
ERROR: spaces required around that '>' (ctx:WxV)
ERROR: that open brace { should be on the previous line
Signed-off-by: Sanjeev Sharma
---
drivers/staging/rtl8723au/core/rtw_cmd.c | 83 +++-
1 file cha
This is a patch to the rtw_cmd.c file that fixes following
Warning by introducing temporary structure.
WARNING: line over 80 characters
Signed-off-by: Sanjeev Sharma
---
drivers/staging/rtl8723au/core/rtw_cmd.c | 123 +++
1 file changed, 60 insertions(+), 63 deletion
-Original Message-
From: Greg KH [mailto:gre...@linuxfoundation.org]
Sent: Wednesday, November 05, 2014 9:58 PM
To: Sharma, Sanjeev
Cc: larry.fin...@lwfinger.net; jes.soren...@redhat.com;
de...@driverdev.osuosl.org; linux-wirel...@vger.kernel.org;
linux-ker...@vger.kernel.org
Subject: Re
96 matches
Mail list logo