On Thu, 17 May 2018 14:07:40 -0700
Michael Kelley wrote:
> Current code allocates 240 Kbytes (in typical configs) for
> each synthetic SCSI controller to use as temp cpumask variables.
> Recode to avoid needing the temp cpumask variables and remove the
> memory allocation.
>
> Signed-off-by: Mic
Hello,
We've never met before now so you must be wondering who I'm and the purpose of
my email.
I found your contact through the help of a private investigator, whose report
says that you are possibly a distant relative of my late boss. I have some
important information to share with you but I
Current code allocates 240 Kbytes (in typical configs) for
each synthetic SCSI controller to use as temp cpumask variables.
Recode to avoid needing the temp cpumask variables and remove the
memory allocation.
Signed-off-by: Michael Kelley
---
This patch is for the 4.18/scsi-queue branch and impr
Christoph Hellwig writes:
> On Thu, May 17, 2018 at 12:28:01AM -0500, Eric W. Biederman wrote:
>> > struct pid_namespace *proc_pid_namespace(struct inode *inode)
>> > {
>> >// maybe warn on for s_magic not on procfs??
>> >return inode->i_sb->s_fs_info;
>> > }
>>
>> That should work. Ide
Quoting Rui Miguel Silva (2018-05-17 05:50:24)
> Fix the mipi dphy root divider to mipi_dphy_pre_div, this would remove a
> orphan
> clock and set the correct parent.
>
> before:
> cat clk_orphan_summary
> enable prepare protect
>clock
Remove dependencies on HAS_DMA where a Kconfig symbol depends on another
symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST".
In most cases this other symbol is an architecture or platform specific
symbol, or PCI.
Generic symbols and drivers without platform dependencies keep their
Add bindings documentation for i.MX7 media drivers.
Signed-off-by: Rui Miguel Silva
---
.../devicetree/bindings/media/imx7.txt| 145 ++
1 file changed, 145 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/imx7.txt
diff --git a/Documentation/devic
Add power domain index 0 related with mipi-phy to imx7s.
Signed-off-by: Rui Miguel Silva
---
arch/arm/boot/dts/imx7s.dtsi | 6 ++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 4d42335c0dee..67450ad89940 100644
--- a/arch/arm/b
This patch adds the device tree nodes for csi, video multiplexer and mipi-csi
besides the graph connecting the necessary endpoints to make the media capture
entities to work in imx7 Warp board.
Also add the pin control related with the mipi_csi in that board.
Signed-off-by: Rui Miguel Silva
---
Warp7 comes with a Omnivision OV2680 sensor, add the node here to make complete
the camera data path for this system. Add the needed regulator to the analog
voltage supply, the port and endpoints in mipi_csi node and the pinctrl for the
reset gpio.
Signed-off-by: Rui Miguel Silva
---
arch/arm/bo
Fix the mipi dphy root divider to mipi_dphy_pre_div, this would remove a orphan
clock and set the correct parent.
before:
cat clk_orphan_summary
enable prepare protect
clock countcountcountrate
accuracy phase
-
The IOMUXC General Purpose Register has bitfield to control video bus
multiplexer to control the CSI input between the MIPI-CSI2 and parallel
interface. Add that register and mask.
Signed-off-by: Rui Miguel Silva
Reviewed-by: Philipp Zabel
---
arch/arm/boot/dts/imx7s.dtsi | 8 +++-
1 file c
Adds MIPI CSI-2 subdev for i.MX7 to connect with sensors with a MIPI CSI-2
interface.
Signed-off-by: Rui Miguel Silva
---
drivers/staging/media/imx/Makefile |1 +
drivers/staging/media/imx/imx7-mipi-csis.c | 1154
2 files changed, 1155 insertions(+)
create mode
This add the media entity subdevice and control driver for the i.MX7
CMOS Sensor Interface.
Signed-off-by: Rui Miguel Silva
---
drivers/staging/media/imx/Kconfig |9 +-
drivers/staging/media/imx/Makefile |2 +
drivers/staging/media/imx/imx7-media-csi.c | 1352 +++
To guarantee that we do not get Overflow in image FIFO the outer bandwidth has
to be faster than inputer bandwidth. For that it must be possible to set a
faster frequency clock. So set new parent to sys_pfd3 clock for the mipi csi
block.
Cc: linux-...@vger.kernel.org
Acked-by: Shawn Guo
Signed-of
Add rst document to describe the i.MX7 media driver and also a working
example from the Warp7 board usage with a OV2680 sensor.
Signed-off-by: Rui Miguel Silva
---
.../devicetree/bindings/media/imx7.txt| 20 ---
Documentation/media/v4l-drivers/imx7.rst | 157 ++
Doc
Refactor and move media device initialization code to a new common module, so it
can be used by other devices, this will allow for example a near to introduce
imx7 CSI driver, to use this media device.
Also introduce a new flag to control the presence of IPU or not (imx6/5 has
this but imx7 does n
Add some i.MX7 related entries to TODO file.
Signed-off-by: Rui Miguel Silva
---
drivers/staging/media/imx/TODO | 9 +
1 file changed, 9 insertions(+)
diff --git a/drivers/staging/media/imx/TODO b/drivers/staging/media/imx/TODO
index aeeb15494a49..6f29b5ca5324 100644
--- a/drivers/stagi
Hi,
This series introduces the Media driver to work with the i.MX7 SoC. it uses the
already existing imx media core drivers but since the i.MX7, contrary to
i.MX5/6, do not have an IPU and because of that some changes in the imx media
core are made along this series to make it support that case.
T
On Wed, May 16, 2018 at 03:04:34PM -0500, ankit patel wrote:
> Style fix: config GOLDFISH_AUDIO containing "--help--" to "help"
>
> Signed-off-by: ankit patel
> ---
> drivers/staging/goldfish/Kconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Where are patches 1-10 in this series?
Hi,
We've never met before now so you must be wondering who I'm and the purpose of
my email.
I found your contact through the help of a private investigator, whose report
says that you are possibly a distant relative of my late boss. I have some
important information to share with you but I wo
21 matches
Mail list logo