This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().

Signed-off-by: Larry Finger <larry.fin...@lwfinger.net>
Cc: Ping-Ke Shih <pks...@realtek.com>
---
 .../net/wireless/realtek/rtlwifi/rtl8188ee/fw.c    | 33 ++++++----------------
 .../net/wireless/realtek/rtlwifi/rtl8188ee/hw.c    | 30 ++++++++------------
 .../net/wireless/realtek/rtlwifi/rtl8188ee/phy.c   | 22 ++++++---------
 .../net/wireless/realtek/rtlwifi/rtl8188ee/rf.c    |  3 +-
 .../net/wireless/realtek/rtlwifi/rtl8188ee/sw.c    |  8 ++----
 5 files changed, 33 insertions(+), 63 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/fw.c 
b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/fw.c
index c34cde2..009fd3b 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/fw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/fw.c
@@ -125,10 +125,8 @@ static void _rtl88e_write_fw(struct ieee80211_hw *hw,
        pagenums = size / FW_8192C_PAGE_SIZE;
        remainsize = size % FW_8192C_PAGE_SIZE;
 
-       if (pagenums > 8) {
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "Page numbers should not greater then 8\n");
-       }
+       if (pagenums > 8)
+               pr_err("rtl8188ee: Page numbers should not greater then 8\n");
 
        for (page = 0; page < pagenums; page++) {
                offset = page * FW_8192C_PAGE_SIZE;
@@ -157,15 +155,10 @@ static int _rtl88e_fw_free_to_go(struct ieee80211_hw *hw)
                 (!(value32 & FWDL_CHKSUM_RPT)));
 
        if (counter >= FW_8192C_POLLING_TIMEOUT_COUNT) {
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "chksum report faill ! REG_MCUFWDL:0x%08x .\n",
-                         value32);
+               pr_err("rtl8188ee: chksum report fail! REG_MCUFWDL:0x%08x .\n",
+                      value32);
                goto exit;
        }
-
-       RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
-                "Checksum report OK ! REG_MCUFWDL:0x%08x .\n", value32);
-
        value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
        value32 |= MCUFWDL_RDY;
        value32 &= ~WINTINI_RDY;
@@ -176,20 +169,15 @@ static int _rtl88e_fw_free_to_go(struct ieee80211_hw *hw)
 
        do {
                value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
-               if (value32 & WINTINI_RDY) {
-                       RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
-                                "Polling FW ready success!! 
REG_MCUFWDL:0x%08x.\n",
-                                 value32);
-                       err = 0;
-                       goto exit;
-               }
+               if (value32 & WINTINI_RDY)
+                       return 0;
 
                udelay(FW_8192C_POLLING_DELAY);
 
        } while (counter++ < FW_8192C_POLLING_TIMEOUT_COUNT);
 
-       RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                "Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n", value32);
+       pr_err("rtl8188ee: Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n",
+              value32);
 
 exit:
        return err;
@@ -235,8 +222,7 @@ int rtl88e_download_fw(struct ieee80211_hw *hw,
 
        err = _rtl88e_fw_free_to_go(hw);
        if (err) {
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "Firmware is not ready to run!\n");
+               pr_err("rtl8188ee: Firmware is not ready to run!\n");
        } else {
                RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD,
                         "Firmware is ready to run!\n");
@@ -309,8 +295,7 @@ static void _rtl88e_fill_h2c_command(struct ieee80211_hw 
*hw,
        while (!write_sucess) {
                wait_writeh2c_limit--;
                if (wait_writeh2c_limit == 0) {
-                       RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                                "Write H2C fail because no trigger for FW 
INT!\n");
+                       pr_err("rtl8188ee: Write H2C fail because no trigger 
for FW INT!\n");
                        break;
                }
 
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c 
b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c
index d85fa67..6aa593d 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c
@@ -358,8 +358,7 @@ void rtl88ee_get_hw_reg(struct ieee80211_hw *hw, u8 
variable, u8 *val)
        case HAL_DEF_WOWLAN:
                break;
        default:
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "switch case %#x not processed\n", variable);
+               pr_err("rtl8188ee: switch case %#x not processed\n", variable);
                break;
        }
 }
@@ -572,9 +571,8 @@ void rtl88ee_set_hw_reg(struct ieee80211_hw *hw, u8 
variable, u8 *val)
                                acm_ctrl &= (~ACMHW_VOQEN);
                                break;
                        default:
-                               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                                        "switch case %#x not processed\n",
-                                        e_aci);
+                               pr_err("rtl8188ee: switch case %#x not 
processed\n",
+                                      e_aci);
                                break;
                        }
                }
@@ -737,8 +735,7 @@ void rtl88ee_set_hw_reg(struct ieee80211_hw *hw, u8 
variable, u8 *val)
                                    2, array);
                break; }
        default:
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "switch case %#x not processed\n", variable);
+               pr_err("rtl8188ee: switch case %#x not processed\n", variable);
                break;
        }
 }
@@ -759,9 +756,8 @@ static bool _rtl88ee_llt_write(struct ieee80211_hw *hw, u32 
address, u32 data)
                        break;
 
                if (count > POLLING_LLT_THRESHOLD) {
-                       RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                                "Failed to polling write LLT done at address 
%d!\n",
-                                address);
+                       pr_err("rtl8188ee: Failed to polling write LLT done at 
address %d!\n",
+                              address);
                        status = false;
                        break;
                }
@@ -1096,7 +1092,7 @@ int rtl88ee_hw_init(struct ieee80211_hw *hw)
 
        rtstatus = _rtl88ee_init_mac(hw);
        if (rtstatus != true) {
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Init MAC failed\n");
+               pr_info("Init MAC failed\n");
                err = 1;
                goto exit;
        }
@@ -1252,8 +1248,7 @@ static int _rtl88ee_set_media_status(struct ieee80211_hw 
*hw,
                         "Set Network type to AP!\n");
                break;
        default:
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "Network type %d not support!\n", type);
+               pr_err("rtl8188ee: Network type %d not support!\n", type);
                return 1;
                break;
        }
@@ -1987,7 +1982,7 @@ void rtl88ee_read_eeprom_info(struct ieee80211_hw *hw)
                rtlefuse->autoload_failflag = false;
                _rtl88ee_read_adapter_info(hw);
        } else {
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Autoload ERR!!\n");
+               pr_err("rtl8188ee: Autoload ERR!!\n");
        }
        _rtl88ee_hal_customized_behavior(hw);
 }
@@ -2354,8 +2349,8 @@ void rtl88ee_set_key(struct ieee80211_hw *hw, u32 
key_index,
                        enc_algo = CAM_AES;
                        break;
                default:
-                       RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                                "switch case %#x not processed\n", enc_algo);
+                       pr_err("rtl8188ee: switch case %#x not processed\n",
+                              enc_algo);
                        enc_algo = CAM_TKIP;
                        break;
                }
@@ -2373,9 +2367,7 @@ void rtl88ee_set_key(struct ieee80211_hw *hw, u32 
key_index,
                                        entry_id =
                                          rtl_cam_get_free_entry(hw, p_macaddr);
                                        if (entry_id >=  TOTAL_CAM_ENTRY) {
-                                               RT_TRACE(rtlpriv, COMP_SEC,
-                                                        DBG_EMERG,
-                                                        "Can not find free hw 
security cam entry\n");
+                                               pr_err("rtl8188ee: Can not find 
free hw security cam entry\n");
                                                return;
                                        }
                                } else {
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c 
b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c
index 870d8202..925a43f 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c
@@ -176,7 +176,7 @@ static u32 _rtl88e_phy_rf_serial_read(struct ieee80211_hw 
*hw,
        offset &= 0xff;
        newoffset = offset;
        if (RT_CANNOT_IO(hw)) {
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "return all one\n");
+               pr_err("rtl8188ee: return all one\n");
                return 0xFFFFFFFF;
        }
        tmplong = rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD);
@@ -220,7 +220,7 @@ static void _rtl88e_phy_rf_serial_write(struct ieee80211_hw 
*hw,
        struct bb_reg_def *pphyreg = &rtlphy->phyreg_def[rfpath];
 
        if (RT_CANNOT_IO(hw)) {
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "stop\n");
+               pr_err("rtl8188ee: stop\n");
                return;
        }
        offset &= 0xff;
@@ -373,7 +373,7 @@ static bool _rtl88e_phy_bb8188e_config_parafile(struct 
ieee80211_hw *hw)
 
        rtstatus = phy_config_bb_with_headerfile(hw, BASEBAND_CONFIG_PHY_REG);
        if (!rtstatus) {
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Write BB Reg Fail!!\n");
+               pr_err("rtl8188ee: Write BB Reg Fail!!\n");
                return false;
        }
 
@@ -383,13 +383,13 @@ static bool _rtl88e_phy_bb8188e_config_parafile(struct 
ieee80211_hw *hw)
                  phy_config_bb_with_pghdr(hw, BASEBAND_CONFIG_PHY_REG);
        }
        if (!rtstatus) {
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "BB_PG Reg Fail!!\n");
+               pr_err("rtl8188ee: BB_PG Reg Fail!!\n");
                return false;
        }
        rtstatus =
          phy_config_bb_with_headerfile(hw, BASEBAND_CONFIG_AGC_TAB);
        if (!rtstatus) {
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "AGC Table Fail\n");
+               pr_err("rtl8188ee: AGC Table Fail\n");
                return false;
        }
        rtlphy->cck_high_power =
@@ -1095,8 +1095,7 @@ void rtl88e_phy_scan_operation_backup(struct ieee80211_hw 
*hw, u8 operation)
                                                      (u8 *)&iotype);
                        break;
                default:
-                       RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                                "Unknown Scan Backup operation.\n");
+                       pr_err("rtl8188ee: Unknown Scan Backup operation.\n");
                        break;
                }
        }
@@ -1137,8 +1136,8 @@ void rtl88e_phy_set_bw_mode_callback(struct ieee80211_hw 
*hw)
                rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_prsr_rsc);
                break;
        default:
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+               pr_err("rtl8188ee: unknown bandwidth: %#X\n",
+                      rtlphy->current_chan_bw);
                break;
        }
 
@@ -1162,8 +1160,8 @@ void rtl88e_phy_set_bw_mode_callback(struct ieee80211_hw 
*hw)
                               HAL_PRIME_CHNL_OFFSET_LOWER) ? 2 : 1);
                break;
        default:
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+               pr_err("rtl8188ee: unknown bandwidth: %#X\n",
+                      rtlphy->current_chan_bw);
                break;
        }
        rtl88e_phy_rf6052_set_bandwidth(hw, rtlphy->current_chan_bw);
@@ -1303,8 +1300,8 @@ static bool _rtl88e_phy_sw_chnl_step_by_step(struct 
ieee80211_hw *hw,
                        currentcmd = &postcommoncmd[*step];
                        break;
                default:
-                       RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                                "Invalid 'stage' = %d, Check it!\n", *stage);
+                       pr_err("rtl8188ee: Invalid 'stage' = %d, Check it!\n",
+                              *stage);
                        return true;
                }
 
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/rf.c 
b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/rf.c
index 26ac4c2..30798b1 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/rf.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/rf.c
@@ -51,8 +51,7 @@ void rtl88e_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, 
u8 bandwidth)
                              rtlphy->rfreg_chnlval[0]);
                break;
        default:
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "unknown bandwidth: %#X\n", bandwidth);
+               pr_err("rtl8188ee: unknown bandwidth: %#X\n", bandwidth);
                break;
        }
 }
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/sw.c 
b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/sw.c
index f361808..276c745 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/sw.c
@@ -165,8 +165,7 @@ int rtl88e_init_sw_vars(struct ieee80211_hw *hw)
        /* for firmware buf */
        rtlpriv->rtlhal.pfirmware = vzalloc(0x8000);
        if (!rtlpriv->rtlhal.pfirmware) {
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "Can't alloc buffer for fw.\n");
+               pr_info("Can't alloc buffer for fw.\n");
                return 1;
        }
 
@@ -177,8 +176,7 @@ int rtl88e_init_sw_vars(struct ieee80211_hw *hw)
                                      rtlpriv->io.dev, GFP_KERNEL, hw,
                                      rtl_fw_cb);
        if (err) {
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "Failed to request firmware!\n");
+               pr_info("Failed to request firmware!\n");
                return 1;
        }
 
@@ -278,7 +276,7 @@ static struct rtl_mod_params rtl88ee_mod_params = {
        .swctrl_lps = false,
        .fwctrl_lps = false,
        .msi_support = true,
-       .debug = DBG_EMERG,
+       .debug = 0,
 };
 
 static const struct rtl_hal_cfg rtl88ee_hal_cfg = {
-- 
2.10.2

_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Reply via email to