This change adds abstracted constants for National Instruments
terminal/signal names.
Some background:
There have been significant confusions over the past many years for users
when trying to understand how to connect to/from signals and terminals on
NI hardware using comedi. The major reason for this is that the actual
register values were exposed and required to be used by users. Several
major reasons exist why this caused major confusion for users:
1) The register values are _NOT_ in user documentation, but rather in
arcane locations, such as a few register programming manuals that are
increasingly hard to find and the NI-MHDDK (comments in in example
code). There is no one place to find the various valid values of the
registers.
2) The register values are _NOT_ completely consistent. There is no way
to gain any sense of intuition of which values, or even enums one
should use for various registers. There was some attempt in prior use
of comedi to name enums such that a user might know which enums should
be used for varying purposes, but the end-user had to gain a knowledge
of register values to correctly wield this approach.
3) The names for signals and registers found in the various register
level programming manuals and vendor-provided documentation are _not_
even close to the same names that are in the end-user documentation.
Similar confusion, albeit less, plagued NI's previous version of their own
proprietary drivers. Earlier than 2003, NI greatly simplified the
situation for users by releasing a new API that abstracted the names of
signals/terminals to a common and intuitive set of names. In addition,
this new API provided a much more common interface to use for most of NI
hardware.
The names added here mirror the names chosen and well documented by NI.
These names are exposed to the user via the comedilib user library. By
keeping the names in this format, in spite of the use of CamelScript,
maintenance will be greatly eased and confusion for users _and_ comedi
developers will be greatly reduced.
Signed-off-by: Spencer E. Olson <olso...@umich.edu>
---
Patch revisions:
- [PATCH v2 02/13]: Update signal/terminal names found after adding additional
devices to routing list in [PATCH v2 04/13].
drivers/staging/comedi/comedi.h | 151 ++++++++++++++++++++++++++++++++
1 file changed, 151 insertions(+)
diff --git a/drivers/staging/comedi/comedi.h b/drivers/staging/comedi/comedi.h
index bb961ac79b7e..6d7ad76bed97 100644
--- a/drivers/staging/comedi/comedi.h
+++ b/drivers/staging/comedi/comedi.h
@@ -928,6 +928,157 @@ enum i8254_mode {
I8254_BINARY = 0
};
+/* *** BEGIN GLOBALLY-NAMED NI TERMINALS/SIGNALS *** */
+
+/*
+ * Common National Instruments Terminal/Signal names.
+ * Some of these have no NI_ prefix as they are useful for non-NI hardware,
such
+ * as those that utilize the PXI/RTSI trigger lines.
+ *
+ * NOTE ABOUT THE CHOICE OF NAMES HERE AND THE CAMELSCRIPT:
+ * The choice to use CamelScript and the exact names below is for
+ * maintainability, clarity, similarity to manufacturer's documentation,
+ * _and_ a mitigation for confusion that has plagued the use of these drivers
+ * for years!
+ *
+ * More detail:
+ * There have been significant confusions over the past many years for users
+ * when trying to understand how to connect to/from signals and terminals on
+ * NI hardware using comedi. The major reason for this is that the actual
+ * register values were exposed and required to be used by users. Several
+ * major reasons exist why this caused major confusion for users:
+ * 1) The register values are _NOT_ in user documentation, but rather in
+ * arcane locations, such as a few register programming manuals that are
+ * increasingly hard to find and the NI MHDDK (comments in in example
code).
+ * There is no one place to find the various valid values of the registers.
+ * 2) The register values are _NOT_ completely consistent. There is no way
to
+ * gain any sense of intuition of which values, or even enums one should
use
+ * for various registers. There was some attempt in prior use of comedi to
+ * name enums such that a user might know which enums should be used for
+ * varying purposes, but the end-user had to gain a knowledge of register
+ * values to correctly wield this approach.
+ * 3) The names for signals and registers found in the various register level
+ * programming manuals and vendor-provided documentation are _not_ even
+ * close to the same names that are in the end-user documentation.
+ *
+ * Similar, albeit less, confusion plagued NI's previous version of their own
+ * drivers. Earlier than 2003, NI greatly simplified the situation for users
+ * by releasing a new API that abstracted the names of signals/terminals to a
+ * common and intuitive set of names.
+ *
+ * The names below mirror the names chosen and well documented by NI. These
+ * names are exposed to the user via the comedilib user library. By keeping
+ * the names below, in spite of the use of CamelScript, maintenance will be
+ * greatly eased and confusion for users _and_ comedi developers will be
+ * greatly reduced.
+ */
+
+/*
+ * Base of abstracted NI names.
+ * The first 16 bits of *_arg are reserved for channel selection.
+ * Since we only actually need the first 4 or 5 bits for all register values on
+ * NI select registers anyways, we'll identify all values >= (1<<15) as being
an
+ * abstracted NI signal/terminal name.
+ * These values are also used/returned by INSN_DEVICE_CONFIG_TEST_ROUTE,
+ * INSN_DEVICE_CONFIG_CONNECT_ROUTE, INSN_DEVICE_CONFIG_DISCONNECT_ROUTE,
+ * and INSN_DEVICE_CONFIG_GET_ROUTES.
+ */
+#define NI_NAMES_BASE 0x8000u
+/*
+ * not necessarily all allowed 64 PFIs are valid--certainly not for all devices
+ */
+#define NI_PFI(x) (NI_NAMES_BASE + ((x) & 0x3f))
+/* 8 trigger lines by standard, Some devices cannot talk to all eight. */
+#define TRIGGER_LINE(x) (NI_PFI(-1) + 1 + ((x) & 0x7))
+/* 4 RTSI shared MUXes to route signals to/from TRIGGER_LINES on NI hardware */
+#define NI_RTSI_BRD(x) (TRIGGER_LINE(-1) + 1 + ((x) & 0x3))
+
+/* *** Counter/timer names : 8 counters max *** */
+#define NI_COUNTER_NAMES_BASE (NI_RTSI_BRD(-1) + 1)
+#define NI_MAX_COUNTERS 7
+#define NI_CtrSource(x) (NI_COUNTER_NAMES_BASE + ((x) &
NI_MAX_COUNTERS))
+/* Gate, Aux, A,B,Z are all treated, at times as gates */
+#define NI_GATES_NAMES_BASE (NI_CtrSource(-1) + 1)
+#define NI_CtrGate(x) (NI_GATES_NAMES_BASE + ((x) & NI_MAX_COUNTERS))
+#define NI_CtrAux(x) (NI_CtrGate(-1) + 1 + ((x) & NI_MAX_COUNTERS))
+#define NI_CtrA(x) (NI_CtrAux(-1) + 1 + ((x) & NI_MAX_COUNTERS))
+#define NI_CtrB(x) (NI_CtrA(-1) + 1 + ((x) & NI_MAX_COUNTERS))
+#define NI_CtrZ(x) (NI_CtrB(-1) + 1 + ((x) & NI_MAX_COUNTERS))
+#define NI_GATES_NAMES_MAX NI_CtrZ(-1)
+#define NI_CtrArmStartTrigger(x) (NI_CtrZ(-1) + 1 + ((x) &
NI_MAX_COUNTERS))
+#define NI_CtrInternalOutput(x) \
+ (NI_CtrArmStartTrigger(-1) + 1 + ((x) & NI_MAX_COUNTERS))
+/** external pin(s) labeled conveniently as Ctr<i>Out. */
+#define NI_CtrOut(x) (NI_CtrInternalOutput(-1) + 1 + ((x) &
NI_MAX_COUNTERS))
+/** For Buffered sampling of ctr -- x series capability. */
+#define NI_CtrSampleClock(x) (NI_CtrOut(-1) + 1 + ((x) & NI_MAX_COUNTERS))
+#define NI_COUNTER_NAMES_MAX NI_CtrSampleClock(-1)
+
+enum ni_common_signal_names {
+ /* PXI_Star: this is a non-NI-specific signal */
+ PXI_Star = NI_COUNTER_NAMES_MAX + 1,
+ PXI_Clk10,
+ PXIe_Clk100,
+ NI_AI_SampleClock,
+ NI_AI_SampleClockTimebase,
+ NI_AI_StartTrigger,
+ NI_AI_ReferenceTrigger,
+ NI_AI_ConvertClock,
+ NI_AI_ConvertClockTimebase,
+ NI_AI_PauseTrigger,
+ NI_AI_HoldCompleteEvent,
+ NI_AI_HoldComplete,
+ NI_AI_ExternalMUXClock,
+ NI_AI_STOP, /* pulse signal that occurs when a update is finished(?) */
+ NI_AO_SampleClock,
+ NI_AO_SampleClockTimebase,
+ NI_AO_StartTrigger,
+ NI_AO_PauseTrigger,
+ NI_DI_SampleClock,
+ NI_DI_SampleClockTimebase,
+ NI_DI_StartTrigger,
+ NI_DI_ReferenceTrigger,
+ NI_DI_PauseTrigger,
+ NI_DI_InputBufferFull,
+ NI_DI_ReadyForStartEvent,
+ NI_DI_ReadyForTransferEventBurst,
+ NI_DI_ReadyForTransferEventPipelined,
+ NI_DO_SampleClock,
+ NI_DO_SampleClockTimebase,
+ NI_DO_StartTrigger,
+ NI_DO_PauseTrigger,
+ NI_DO_OutputBufferFull,
+ NI_DO_DataActiveEvent,
+ NI_DO_ReadyForStartEvent,
+ NI_DO_ReadyForTransferEvent,
+ NI_MasterTimebase,
+ NI_20MHzTimebase,
+ NI_80MHzTimebase,
+ NI_100MHzTimebase,
+ NI_200MHzTimebase,
+ NI_100kHzTimebase,
+ NI_10MHzRefClock,
+ NI_FrequencyOutput,
+ NI_ChangeDetectionEvent,
+ NI_AnalogComparisonEvent,
+ NI_WatchdogExpiredEvent,
+ NI_WatchdogExpirationTrigger,
+ NI_SCXI_Trig1,
+ NI_LogicLow,
+ NI_LogicHigh,
+ NI_ExternalStrobe,
+ NI_PFI_DO,
+ NI_CaseGround,
+ /* special internal signal used as variable source for RTSI bus: */
+ NI_RGOUT0,
+
+ /* just a name to make the next more convenient, regardless of above */
+ _NI_NAMES_MAX_PLUS_1,
+ NI_NUM_NAMES = _NI_NAMES_MAX_PLUS_1 - NI_NAMES_BASE,
+};
+
+/* *** END GLOBALLY-NAMED NI TERMINALS/SIGNALS *** */
+
#define NI_USUAL_PFI_SELECT(x) (((x) < 10) ? (0x1 + (x)) : (0xb + (x)))
#define NI_USUAL_RTSI_SELECT(x) (((x) < 7) ? (0xb + (x)) : 0x1b)
--
2.17.1
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
