Currently the set rate granularity is to integral divisors.
Add support for the fractional divisors.
Only the first output0 is fractional in the hardware.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.da...@xilinx.com>
---
v7:
Remove unnecessary comments
use mult_frac
use a common divisor function.
drivers/clk/clk-xlnx-clock-wizard.c | 219 ++++++++++++++++++++++++++++++++----
1 file changed, 199 insertions(+), 20 deletions(-)
diff --git a/drivers/clk/clk-xlnx-clock-wizard.c
b/drivers/clk/clk-xlnx-clock-wizard.c
index 5581b24..ed3b0ef 100644
--- a/drivers/clk/clk-xlnx-clock-wizard.c
+++ b/drivers/clk/clk-xlnx-clock-wizard.c
@@ -29,20 +29,25 @@
#define WZRD_CLKFBOUT_MULT_SHIFT 8
#define WZRD_CLKFBOUT_MULT_MASK (0xff <<
WZRD_CLKFBOUT_MULT_SHIFT)
+#define WZRD_CLKFBOUT_FRAC_SHIFT 16
+#define WZRD_CLKFBOUT_FRAC_MASK (0x3ff <<
WZRD_CLKFBOUT_FRAC_SHIFT)
#define WZRD_DIVCLK_DIVIDE_SHIFT 0
#define WZRD_DIVCLK_DIVIDE_MASK (0xff <<
WZRD_DIVCLK_DIVIDE_SHIFT)
#define WZRD_CLKOUT_DIVIDE_SHIFT 0
#define WZRD_CLKOUT_DIVIDE_WIDTH 8
#define WZRD_CLKOUT_DIVIDE_MASK (0xff <<
WZRD_DIVCLK_DIVIDE_SHIFT)
+#define WZRD_CLKOUT_FRAC_SHIFT 8
+#define WZRD_CLKOUT_FRAC_MASK 0x3ff
#define WZRD_DR_MAX_INT_DIV_VALUE 255
-#define WZRD_DR_NUM_RETRIES 10000
#define WZRD_DR_STATUS_REG_OFFSET 0x04
#define WZRD_DR_LOCK_BIT_MASK 0x00000001
#define WZRD_DR_INIT_REG_OFFSET 0x25C
#define WZRD_DR_DIV_TO_PHASE_OFFSET 4
#define WZRD_DR_BEGIN_DYNA_RECONF 0x03
+#define WZRD_USEC_POLL 10
+#define WZRD_TIMEOUT_POLL 1000
/* Get the mask from width */
#define div_mask(width) ((1 << (width)) - 1)
@@ -52,6 +57,7 @@
enum clk_wzrd_int_clks {
wzrd_clk_mul,
wzrd_clk_mul_div,
+ wzrd_clk_mul_frac,
wzrd_clk_int_max
};
@@ -186,7 +192,7 @@ static long clk_wzrd_round_rate(struct clk_hw *hw, unsigned
long rate,
*/
div = DIV_ROUND_CLOSEST(*prate, rate);
- return (*prate / div);
+ return *prate / div;
}
static const struct clk_ops clk_wzrd_clk_divider_ops = {
@@ -195,6 +201,117 @@ static const struct clk_ops clk_wzrd_clk_divider_ops = {
.recalc_rate = clk_wzrd_recalc_rate,
};
+static unsigned long clk_wzrd_recalc_ratef(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ unsigned int val;
+ u32 div, frac;
+ struct clk_wzrd_divider *divider = to_clk_wzrd_divider(hw);
+ void __iomem *div_addr = divider->base + divider->offset;
+
+ val = readl(div_addr);
+ div = val & div_mask(divider->width);
+ frac = (val >> WZRD_CLKOUT_FRAC_SHIFT) & WZRD_CLKOUT_FRAC_MASK;
+
+ return mult_frac(parent_rate, 1000, (div * 1000) + frac);
+}
+
+static int clk_wzrd_dynamic_reconfig_f(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ int err;
+ u32 value, pre;
+ unsigned long rate_div, f, clockout0_div;
+ struct clk_wzrd_divider *divider = to_clk_wzrd_divider(hw);
+ void __iomem *div_addr = divider->base + divider->offset;
+
+ rate_div = ((parent_rate * 1000) / rate);
+ clockout0_div = rate_div / 1000;
+
+ pre = DIV_ROUND_CLOSEST((parent_rate * 1000), rate);
+ f = (u32)(pre - (clockout0_div * 1000));
+ f = f & WZRD_CLKOUT_FRAC_MASK;
+ f = f << WZRD_CLKOUT_DIVIDE_WIDTH;
+
+ value = (f | (clockout0_div & WZRD_CLKOUT_DIVIDE_MASK));
+
+ /* Set divisor and clear phase offset */
+ writel(value, div_addr);
+ writel(0x0, div_addr + WZRD_DR_DIV_TO_PHASE_OFFSET);
+
+ /* Check status register */
+ err = readl_poll_timeout(divider->base + WZRD_DR_STATUS_REG_OFFSET,
value,
+ value & WZRD_DR_LOCK_BIT_MASK,
+ WZRD_USEC_POLL, WZRD_TIMEOUT_POLL);
+ if (err)
+ return err;
+
+ /* Initiate reconfiguration */
+ writel(WZRD_DR_BEGIN_DYNA_RECONF,
+ divider->base + WZRD_DR_INIT_REG_OFFSET);
+
+ /* Check status register */
+ return readl_poll_timeout(divider->base + WZRD_DR_STATUS_REG_OFFSET,
value,
+ value & WZRD_DR_LOCK_BIT_MASK,
+ WZRD_USEC_POLL, WZRD_TIMEOUT_POLL);
+}
+
+static long clk_wzrd_round_rate_f(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ return rate;
+}
+
+static const struct clk_ops clk_wzrd_clk_divider_ops_f = {
+ .round_rate = clk_wzrd_round_rate_f,
+ .set_rate = clk_wzrd_dynamic_reconfig_f,
+ .recalc_rate = clk_wzrd_recalc_ratef,
+};
+
+static struct clk *clk_wzrd_register_divf(struct device *dev,
+ const char *name,
+ const char *parent_name,
+ unsigned long flags,
+ void __iomem *base, u16 offset,
+ u8 shift, u8 width,
+ u8 clk_divider_flags,
+ const struct clk_div_table *table,
+ spinlock_t *lock)
+{
+ struct clk_wzrd_divider *div;
+ struct clk_hw *hw;
+ struct clk_init_data init;
+ int ret;
+
+ div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL);
+ if (!div)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+
+ init.ops = &clk_wzrd_clk_divider_ops_f;
+
+ init.flags = flags;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ div->base = base;
+ div->offset = offset;
+ div->shift = shift;
+ div->width = width;
+ div->flags = clk_divider_flags;
+ div->lock = lock;
+ div->hw.init = &init;
+ div->table = table;
+
+ hw = &div->hw;
+ ret = devm_clk_hw_register(dev, hw);
+ if (ret)
+ return ERR_PTR(ret);
+
+ return hw->clk;
+}
+
static struct clk *clk_wzrd_register_divider(struct device *dev,
const char *name,
const char *parent_name,
@@ -229,7 +346,6 @@ static struct clk *clk_wzrd_register_divider(struct device
*dev,
div->hw.init = &init;
div->table = table;
- /* register the clock */
hw = &div->hw;
ret = devm_clk_hw_register(dev, hw);
if (ret)
@@ -237,7 +353,6 @@ static struct clk *clk_wzrd_register_divider(struct device
*dev,
return hw->clk;
}
-
static int clk_wzrd_clk_notifier(struct notifier_block *nb, unsigned long
event,
void *data)
{
@@ -267,6 +382,61 @@ static int clk_wzrd_clk_notifier(struct notifier_block
*nb, unsigned long event,
}
}
+static int clk_wzrd_register_dividers(struct platform_device *pdev,
+ const char *clk_name)
+{
+ int i, ret;
+ struct device_node *np = pdev->dev.of_node;
+ int outputs;
+ unsigned long flags = 0;
+ struct clk_wzrd *clk_wzrd = platform_get_drvdata(pdev);
+ const char *clkout_name;
+
+ outputs = of_property_count_strings(np, "clock-output-names");
+ if (outputs == 1)
+ flags = CLK_SET_RATE_PARENT;
+
+ for (i = outputs - 1; i >= 0 ; i--) {
+ if (of_property_read_string_index(np, "clock-output-names", i,
+ &clkout_name)) {
+ dev_err(&pdev->dev,
+ "clock output name not specified\n");
+ ret = -EINVAL;
+ return ret;
+ }
+
+ if (!i)
+ clk_wzrd->clkout[i] = clk_wzrd_register_divf
+ (&pdev->dev, clkout_name,
+ clk_name, flags,
+ clk_wzrd->base, (WZRD_CLK_CFG_REG(2) + i * 12),
+ WZRD_CLKOUT_DIVIDE_SHIFT,
+ WZRD_CLKOUT_DIVIDE_WIDTH,
+ CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
+ NULL, &clkwzrd_lock);
+ else
+ clk_wzrd->clkout[i] = clk_wzrd_register_divider
+ (&pdev->dev, clkout_name,
+ clk_name, 0,
+ clk_wzrd->base, (WZRD_CLK_CFG_REG(2) + i * 12),
+ WZRD_CLKOUT_DIVIDE_SHIFT,
+ WZRD_CLKOUT_DIVIDE_WIDTH,
+ CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
+ NULL, &clkwzrd_lock);
+
+ if (IS_ERR(clk_wzrd->clkout[i])) {
+ int j;
+
+ for (j = i + 1; j < outputs; j++)
+ clk_unregister(clk_wzrd->clkout[j]);
+ dev_err(&pdev->dev,
+ "unable to register divider clock\n");
+ ret = PTR_ERR(clk_wzrd->clkout[i]);
+ return ret;
+ }
+ }
+ return 0;
+}
static int __maybe_unused clk_wzrd_suspend(struct device *dev)
{
struct clk_wzrd *clk_wzrd = dev_get_drvdata(dev);
@@ -298,8 +468,8 @@ static SIMPLE_DEV_PM_OPS(clk_wzrd_dev_pm_ops,
clk_wzrd_suspend,
static int clk_wzrd_probe(struct platform_device *pdev)
{
- int i, ret;
- u32 reg;
+ int ret;
+ u32 reg, reg_f, mult;
unsigned long rate;
const char *clk_name;
struct clk_wzrd *clk_wzrd;
@@ -349,17 +519,13 @@ static int clk_wzrd_probe(struct platform_device *pdev)
goto err_disable_clk;
}
- /* we don't support fractional div/mul yet */
- reg = readl(clk_wzrd->base + WZRD_CLK_CFG_REG(0)) &
- WZRD_CLKFBOUT_FRAC_EN;
- reg |= readl(clk_wzrd->base + WZRD_CLK_CFG_REG(2)) &
- WZRD_CLKOUT0_FRAC_EN;
- if (reg)
- dev_warn(&pdev->dev, "fractional div/mul not supported\n");
+ reg = readl(clk_wzrd->base + WZRD_CLK_CFG_REG(0));
+ reg_f = reg & WZRD_CLKFBOUT_FRAC_MASK;
+ reg_f = reg_f >> WZRD_CLKFBOUT_FRAC_SHIFT;
- /* register multiplier */
- reg = (readl(clk_wzrd->base + WZRD_CLK_CFG_REG(0)) &
- WZRD_CLKFBOUT_MULT_MASK) >> WZRD_CLKFBOUT_MULT_SHIFT;
+ reg = reg & WZRD_CLKFBOUT_MULT_MASK;
+ reg = reg >> WZRD_CLKFBOUT_MULT_SHIFT;
+ mult = (reg * 1000) + reg_f;
clk_name = kasprintf(GFP_KERNEL, "%s_mul", dev_name(&pdev->dev));
if (!clk_name) {
ret = -ENOMEM;
@@ -368,8 +534,7 @@ static int clk_wzrd_probe(struct platform_device *pdev)
clk_wzrd->clks_internal[wzrd_clk_mul] = clk_register_fixed_factor
(&pdev->dev, clk_name,
__clk_get_name(clk_wzrd->clk_in1),
- 0, reg, 1);
- kfree(clk_name);
+ 0, mult, 1000);
if (IS_ERR(clk_wzrd->clks_internal[wzrd_clk_mul])) {
dev_err(&pdev->dev, "unable to register fixed-factor clock\n");
ret = PTR_ERR(clk_wzrd->clks_internal[wzrd_clk_mul]);
@@ -407,8 +572,18 @@ static int clk_wzrd_probe(struct platform_device *pdev)
ret = -EINVAL;
goto err_rm_int_clks;
}
- clk_wzrd->clkout[i] = clk_wzrd_register_divider(&pdev->dev,
- clkout_name,
+ if (!i)
+ clk_wzrd->clkout[i] = clk_wzrd_register_divf
+ (&pdev->dev, clkout_name,
+ clk_name, 0,
+ clk_wzrd->base, (WZRD_CLK_CFG_REG(2) + i * 12),
+ WZRD_CLKOUT_DIVIDE_SHIFT,
+ WZRD_CLKOUT_DIVIDE_WIDTH,
+ CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
+ NULL, &clkwzrd_lock);
+ else
+ clk_wzrd->clkout[i] = clk_wzrd_register_divider
+ (&pdev->dev, clkout_name,
clk_name, 0,
clk_wzrd->base, (WZRD_CLK_CFG_REG(2) + i * 12),
WZRD_CLKOUT_DIVIDE_SHIFT,
@@ -427,6 +602,10 @@ static int clk_wzrd_probe(struct platform_device *pdev)
}
}
+ ret = clk_wzrd_register_dividers(pdev, clk_name);
+ if (ret)
+ goto err_rm_int_clks;
+
kfree(clk_name);
clk_wzrd->clk_data.clks = clk_wzrd->clkout;
--
2.1.1
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
