On May 25, 2010, at 9:34 AM, w0rmt wrote:
> Greetings all-
>
> This morning I noticed an issue with the ID800H in my truck. When
> transmitting on high power (into port B of W0CDS), the unit cuts out and
> gives four long beeps. I initially thought it was a high SWR safety feature,
> but when
I suspect a weak power supply or resistive fuse - does the voltage sag
noticeably under load ? steve
On Tue, May 25, 2010 at 10:34 AM, w0rmt wrote:
> Greetings all-
>
> This morning I noticed an issue with the ID800H in my truck. When
> transmitting on high power (into port B of W0CDS), the uni
I had this identical problem, a few times. I was using my ID-800 as a base
station. I was transmitting on 441.0 MHz and heard the beeps and the radio
stopped transmitting. Never happened on any other frequency. I mentioned it
to one of the Icom Tech. guys. He had no comments. I dunno...
Buddy M
Hi
Sounds like a very similar thing that happened with my ID-80 HT. It
was because external DC voltage supplied was a bit high and adjusting
it to 13.5 fixed the problem.
JI1BQW
Kay
On 2010/05/26, at 0:34, "w0rmt" wrote:
Greetings all-
This morning I noticed an issue with the ID800H in
lf Of w0rmt
Sent: Tuesday, May 25, 2010 11:35 AM
To: dstar_digital@yahoogroups.com
Subject: [DSTAR_DIGITAL] ID800 High power DV transmit issue
Greetings all-
This morning I noticed an issue with the ID800H in my truck. When transmitting
on high power (into port B of W0CDS), the unit cuts ou
Greetings all-
This morning I noticed an issue with the ID800H in my truck. When transmitting
on high power (into port B of W0CDS), the unit cuts out and gives four long
beeps. I initially thought it was a high SWR safety feature, but when
transmitting on high on other frequencies near this one
Hi all,
I find when setting up a rig having flow charts or some sort of quick reference
is valuable.
I put in FILES in the directory "ID-800 Dual Band Xcvr" scanned in copies of
the Mode Arrangements, pages 123-126 of the manual. These charts show the
sequence and brief title of each in the m
On Mar 15, 2009, at 7:26 PM, Jim wrote:
> I am having problems with ID 800 geting in to Gateway any1 can help
> email me atkg4...@gmail.com
>
What's the problem? If you're having trouble, others reading the list
(or the archives later) are probably also having the same problems.
Happy to
I am having problems with ID 800 geting in to Gateway any1 can help email me at
kg4...@gmail.com
> I am using the ID800 and trying to set it up for DATA Transmission.
> I have the Icom Cable and using an MFJ USB to Serial adapter. The MFJ
> cable does work because I can use it for my ID91AD programming. The
> software I am using is D-Chat and have tried dRATS. The software does
> see the com
I am using the ID800 and trying to set it up for DATA Transmission.
I have the Icom Cable and using an MFJ USB to Serial adapter. The MFJ
cable does work because I can use it for my ID91AD programming. The
software I am using is D-Chat and have tried dRATS. The software does
see the computer but
There were two upgrades to the ID800. The first took the memories
from 6 to 100 (154 if you use RPT slots as UR's). (See ID-800 ICF in
the files section on dstar_digital). There was no fee for this
upgrade. The second upgrade added an RF attenuator and a beep for $30
something $$$. I would cal
12 matches
Mail list logo
