Fran,
Thank you. I initially thought that also, but checked and I was in FM mode for
both radios when I heard the buzzing sound and could talk over the buzz and
actually hear myself on FM in the other radio.
When both radios were in DV mode, the call sign and message from the buzzing
radio did
John,
I had 2 91AD's that I was loading memories and testing. 91AD "A" to 91AD "B"
call sign and message went fine on DV and No Buzz on FM from "A" to "B"; same
distance "B" to "A" DV did not work and Buzz heard. On 70 cm everything worked
fine "A" to "B" and "B" to "A". On an IC-2820 with remot
John,
I appreciate any ideas or thoughts or things to check. I also think it may be a
problem/defect with the radio, but wanted to check with others just in case
there might be some setting in the radio that I might have accidentally
done/set that is not reset to factory defaults with the Reset
Neil,
Thank you. I did take the D-Star board out and re-installed it with no affect.
But you do give me a idea, which is to take the D-Star board out and see if the
Buzz on 2 meter FM is still present. I will try that the next time I have
access to the radio.
73, Charles WB5EXI
--- In dstar_dig
John,
My original question/email did state that I had done a Reset All on the radio
three times and tested after each reset, just in case.
I have been using the Chirp program for both the IC-2820's and IC-91AD's with
very good luck doing multiple radios in a reasonable time.
73, Charles WB5EXI
Charles,
OK, just wanted to verify. It's hard to diagnose from a distance, but
I would suspect a defect in in 91AD "B" based on the description you
have provided.
On Oct 19, 2009, at 9:55 AM, CharlesK wrote:
John,
I had 2 91AD's that I was loading memories and testing. 91AD "A" to
91
Check the D-Star board hasn't come loose inside or has dirty pins
73
Neil.
- Original Message -
From: CharlesK
To: dstar_digital@yahoogroups.com
Sent: Monday, October 19, 2009 7:22 PM
Subject: [DSTAR_DIGITAL] Re: IC-91AD Buzz on 2 meter Transmit
John,
I appre
Charles,
I don't remember if you said you were programming these radios by hand
or using software. If using software, a full reset of the radio
wouldn't be a bad idea as you can quickly reload memories. If you
have the Icom RS91 software, it should be easy (additional help on my
site at
@yahoogroups.com
Sent: Monday, October 19, 2009 8:14 PM
Subject: [DSTAR_DIGITAL] Re: IC-91AD Buzz on 2 meter Transmit
Neil,
Thank you. I did take the D-Star board out and re-installed it with no
affect. But you do give me a idea, which is to take the D-Star board out and
see if the
