>I bought one on eBay. Received it. Wouldn't work. Showed up on desktop but
>it reported that it could not locate modem. I could select alternate
>Ethernet but I could never "see" other Macs or my Ethernet printer (nor
>could another Mac see me). I also could not update the firmware.
The older GV
Marc Sira on 12/8/00 12:52 PM wrote:
> The only thing you need to use the v.90 modem with Remote Access is a
> modem script. The GV 28.8-56k script that comes with 8.6 or 9.0 will
> work, except it won't report connect speeds properly. There are
> scripts updated for the v.90 response codes at Ni
Is that the same with the U.S. Robotics card?
Tom
> From: [EMAIL PROTECTED]
> Reply-To: <[EMAIL PROTECTED]> (Duo/2400 List)
> Date: Fri, 8 Dec 2000 12:57:46 EST
> To: <[EMAIL PROTECTED]> (Duo/2400 List)
> Subject: [Duo2400] Re: GV 56K V.90 PC Card CD information
>
Stan,
you can get the software and most likely the dongle too.
1. Here is the GV software I have on several emergency locations. Let me know
if you canĀ“t find it.
GV PC Card Installer Disk 1 1214K
GV PC Card Installer Disk 2 1255K
GV PC Card Installer Disk 3 663K
GV PC Card ROM Update 2
I used the GV 56k v.90 PC Card for about two months
two years ago. I had problems getting the software to
work. My solution was to buy a different modem,
Ricochet. I still have the GV modem at home, and bet
that I might be able to find the software. I'll get
back to you if I do.
ShaneW
> As a la
>For the past several years I have been using a GV Powerport Platinum Pro
>PC Card with Ethernet. At my home the Platinum Pro PC Card is more than
>sufficient since downloads and uploads are as fast as the 56k modem in my
>iMac given the poor quality of the phone lines. However, at work and at
>se
Go here:
http://www.globalvillage.com/support/V90-pccard-mac.html
and download it! You should get everything you need to make it work!
Brandy
-Original Message-
From: Duo/2400 List [mailto:[EMAIL PROTECTED]]On Behalf
Of [EMAIL PROTECTED]
Sent: Thursday, December 07, 2000 8:30 PM
To: Duo/2