I am unsure of the relevance of what is stated below, but share it in the
hope that someone (perhaps me!) will ultimately benefit -
I downloaded and installed 7.04.
Tried to open the 'Help' file.
Got the error message!
Could not remember where the info was located for the fix (yes,
DX4WIN Group
OKI finally got the 4800 in the preferences screenit still did not
work...until I set the RTS port of the 2000D to OFFthe default is
ONaccording to the manual, Menu 29 Enables/ Disables the RTS port of the
CAT jack.
It appears to be working nowanyone else
I found two egregious errors in the IOTA database. Both EU-022 (Jan Mayen) and
SA-070 were in the wrong hemisphere. EU-022 is the worse of the two errors,
since entering a QSO with any JX station will cause the beam heading and
distance to be incorrect.
The errors will be corrected in the next r
You have to check off the "Default" button in the Radio preferences to change
the baud rate.
73 - Jim AD1C
--- Louis Dietrich <[EMAIL PROTECTED]> wrote:
> I tried doing it that waybut in Preferences, you cannot change the Baud
> Rate...you cannot overwrite the Baud Rate windowDX4WIN does
Jim,
I tried doing it that waybut in Preferences, you cannot change the Baud
Rate...you cannot overwrite the Baud Rate windowDX4WIN doesn't allow
it...
Lou
-Original Message-
From: Jim Reisert AD1C [mailto:[EMAIL PROTECTED]
Sent: Tuesday, May 20, 2008 4:44 PM
To: Louis Dietrich
Lou, you set the baud rate by going to Preferences -> Radio and set it there!
73 - Jim AD1C
--- Louis Dietrich <[EMAIL PROTECTED]> wrote:
> I am trying to get my FT2000 to communicate with DX4WIN
>
> 1. The FT2000 baud rate default is 4800...
>
> 2. In DX4WIN, the Yaesu baud rate is 9600..
I am trying to get my FT2000 to communicate with DX4WIN
1. The FT2000 baud rate default is 4800...
2. In DX4WIN, the Yaesu baud rate is 9600when I try to set the DX4WIN
baud rate to 4800 by going to Databases] Radios ] Yaesu...set the standard
baud rate to 4800...Save changesit seemin
Not a bug. Operator error. I was looking at wrong window.
de Vic, N5YY
- Original Message -
From: "Victor West" <[EMAIL PROTECTED]>
To:
Sent: Tuesday, May 20, 2008 12:50 PM
Subject: [Dx4win] BUG IN 4.04?
Is it me or is it a bug?
I have VE and K placed in the spotters box in pac
Don KA5EYH found another bug in 7.04.
In your QSO preferences, if you try to change the default QSL method to
something other than bureau, and you save your preferences, when you check your
QSO preferences again, the setting is still "Buro".
73 - Jim AD1C
--
Jim Reisert AD1C/Ø, <[EMAIL PROTECTE
Is it me or is it a bug?
I have VE and K placed in the spotters box in packet 1 under preferences.
This is supposed to limit packet spots to those originated in VE and K land.
I am however, getting spots from all countries. I do not have Paul's e-mail
address so could somebody relay this (if
10 matches
Mail list logo