switching USB cables...they do fail.
>
> GL de Mike
> K7PI
>
> -Original Message-
> From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
> On Behalf Of F6EXV
> Sent: Wednesday, December 11, 2019 09:41
> To: REFLECTOR dx4win
> Subject: [
ave already tried switching USB cables...they do fail.
>
> GL de Mike
> K7PI
>
> -Original Message-
> From: dx4win-boun...@mailman.qth.net [mailto:
> dx4win-boun...@mailman.qth.net]
> On Behalf Of F6EXV
> Sent: Wednesday, December 11, 2019 09:41
> To: REFLECTOR dx
You probably have already tried switching USB cables...they do fail.
GL de Mike
K7PI
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of F6EXV
Sent: Wednesday, December 11, 2019 09:41
To: REFLECTOR dx4win
Subject: [Dx4win] Rotator
Message-
From: F6EXV
Sent: Wednesday, December 11, 2019 8:53 PM
To: ON4AOI
Subject: Re: [Dx4win] Rotator control
Hello Guy
I have com 1 appaer in the device manager, but com 2 disappeared.
They are real RS232 ports.
It used to work, I shut the computer, and when I restarted it, I had this
er 11, 2019 6:41 PM
To: REFLECTOR dx4win
Subject: [Dx4win] Rotator control
Hi all
I used to have my Prosistel 70D rotor work perfectly with DX4Win.
It no longer does, and the com port it was connected with (com 2) no longer
shows on the device manager of my Windows 10.
I tried com 1 on both DX4Wi
Hi all
I used to have my Prosistel 70D rotor work perfectly with DX4Win.
It no longer does, and the com port it was connected with (com 2) no
longer shows on the device manager of my Windows 10.
I tried com 1 on both DX4Win and Prosistel, it still does not work, and
they cannot communicate.
Any
I am using a Yaesu 2800 rotor with a Sartek card. The rotor works fine but I
can’t get it to interface with DX4WIN. It worked in years gone by but not now.
When I check rotator parameters it shows it to be disabled. If I it set it to
normal and try the rotor—it reverts to disabled. Is my card ba
McMillen
Verzonden: donderdag 22 november 2012 16:06
Aan: dx4win@mailman.qth.net
Onderwerp: [Dx4win] Rotator Control
I am using DX4WIN, Ver 8.05.
When I double click on a DX spot, the frequency and mode of my transmitter
(ICOM IC-756PROII) is changed to the spot frequency and mode. Is there any
I am using DX4WIN, Ver 8.05.
When I double click on a DX spot, the frequency and mode of my transmitter
(ICOM IC-756PROII) is changed to the spot frequency and mode. Is there any
way I can configure so that the rotator will also rotate to the spot station
bearing?
Larry, W4WIV
___
Anyone heard anymore about having the ability to chose between 2
different Rotator's like we can with Radios? What say you Paul? Thanks, John
--
EMAIL: j...@w9rpm.com
WEBPAGE: http://www.w9rpm.com/
Wisconsin VHF/UHF County Hunters: http://www.wivuch.com/
DX and CONTEST CLUB: http://www.w9idx.com
10 matches
Mail list logo