Jorge, Your e-mail bounced when I replied just to your e-mail address, so I had to go through the reflector. One more thing, some later model PC mainboards, with audio built on to the mainboard, have provisions for doing this with a jumper or just automatically and no PC speaker exists in these systems. -=Rog-K9RB=- ----- Original Message ----- From: "Roger Borowski" <[EMAIL PROTECTED]> To: "Jorge Garc?a" <[EMAIL PROTECTED]>; <dx4win@mailman.qth.net> Sent: Thursday, January 27, 2005 8:05 PM Subject: Re: [Dx4win] cw announce
> Jorge, See if your sound card has a set of pins that you can push on the > connector that presently goes to your PC's internal speaker. Some do, but > many do not. If it has two inputs for more than one CD-Rom drive, you can > also use one of these if one is still available, and not being used, but you > must use a swamping resistor to limit the input to the sound card to near > line level vs.the PC speaker level. That's the only way, as the software > just talks to the PC speaker circuitry as designed, likely with the > assumption that you can still use it without a sound card and to make it > work without any added hardware requirements. > 73, -=Rog-K9RB=- > > ----- Original Message ----- > From: "Jorge Garc?a" <[EMAIL PROTECTED]> > To: <dx4win@mailman.qth.net> > Sent: Thursday, January 27, 2005 9:28 AM > Subject: [Dx4win] cw announce > > > > > > Dr. Paul, in ver. 6.04 spots CW announce still through the small speaker > of > > the computer?Let me know if there are a solutiontnx es 73,jorge > > garcia/EA8ASE > > > > _______________________________________________ > > Dx4win mailing list > > Dx4win@mailman.qth.net > > http://mailman.qth.net/mailman/listinfo/dx4win > > > > _______________________________________________ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win >
