> But a better question is - why should this be done - especially from the guest
> which has a limited view of the machine? The machine might be running a lot of
> other requests so the OBFF inside the guest could be invalid.
>
Maybe I did not describe it clearly, the original idea is host admin ca
Hello Matthew,
CTRL.SLU is already enabled. Enabling it "again" for good measure also doesn't
seem to help.
The register values I included in my original message were actually from the
"fail" scenario (cable not plugged in, loopback enabled). The values from the
success scenario (cable plugged
> -Original Message-
> From: Ruvinskiy, Ray [mailto:ray.ruvins...@bluecoat.com]
> Sent: Tuesday, April 10, 2012 3:34 PM
> To: e1000-devel@lists.sourceforge.net
> Subject: [E1000-devel] MAC Loopback with 82574L
>
> Hello,
>
> I am trying to enable MAC loopback with an 82574L device. The co
Hello,
I am trying to enable MAC loopback with an 82574L device. The code looks
roughly as follows:
u32 rctl, ctrl;
ctrl = E1000_READ_REG(&adapter->hw, E1000_CTRL);
ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_SPD_1000);
ctrl |= (E1000_CTRL_FRCDPX | E1000_CTRL_FD);
rctl = E1000_
On Tue, 10 Apr 2012 14:54:02 +0200
Marko Kobal wrote:
> Hi,
>
> I have a "Intel Corporation 82572EI Gigabit Ethernet Controller (Copper) (rev
> 06)" in my CentOS 5.7 (2.6.18-274.7.1.el5 x86_64) box.
>
> I have installed the latest drivers (e1000e-1.10.6.tar.gz) but can't enable
> Flow Control
Hi,
I have a "Intel Corporation 82572EI Gigabit Ethernet Controller (Copper) (rev
06)" in my CentOS 5.7 (2.6.18-274.7.1.el5 x86_64) box.
I have installed the latest drivers (e1000e-1.10.6.tar.gz) but can't enable
Flow Control:
It seems like Flow Control is enabled when I load the driver, but a
Dear Sir/Madam:
We are professional Coconut Water, Energy Drinks, Coffee Drink，Aloe-vera juice
and Beer manufacturer in Vietnam.
You can visit: http://vn105660124.trustpass.alibaba.com/ or
http://www.rita.com.vn
Best regards,
Miss Vivien: ab...@vnn.vn
RITA FOOD&DRINK CO.,LTD
30 Street 4 VSIP,
