Hi Nathan,
Thanks for the report. We are trying to reproduce this issue in our lab.
Could you please send us:
- dmesg
- modinfo bonding | head
Just to narrow down the issue, have you tried this on all other interfaces
besides ixgbe? (e.g. igb, e1000, or e1000e)?
We will keep you informed
Hi All,
I think I've found a bug in the ixgbe driver when using bonding + jumbo
frames. Adding slaves to the bond device and setting mtu 9000 after
enslaving, results in one of the slaves dropping traffic. The strange
thing is putting bond0 into promiscuous mode (by running tcpdump) will
solve
Allan,
thanks for your quick reply.
On Fri, Jun 29, 2012 at 05:03:50PM +, Allan, Bruce W wrote:
> Please try:
> 1) checking for a BIOS update from Lenovo?
I'm using the most current BIOS. (The thinkpad_acpi recommends this, and I'm
following this advice.)
> 2) the latest upstream e1000e dr
On Fri, 29 Jun 2012 08:44:52 +0800
Junchang Wang wrote:
> >
> >
> > > >
> > > I encountered a similar problem, and we got a significant performance
> > boost
> > > after limiting the number of queues from 64 to 8. (The sever is equipped
> > > with 80 cores.)
> > >
> > > I'm very curious about wha
> -Original Message-
> From: Philipp Kern [mailto:pk...@debian.org]
> Sent: Friday, June 29, 2012 9:10 AM
> To: e1000-devel@lists.sourceforge.net
> Subject: [E1000-devel] e1000e: only 10M full-duplex after suspend /
> reloading module works
>
> Hi,
>
> I'm running a Debian kernel and at l
Hi,
I'm running a Debian kernel and at least since 3.2 I've got a problem with my
82579LM (in a Thinkpad T420). If I plug in a network cable after waking my
laptop from suspend I get 10M full-duplex instead of the 100M or 1000M the
other side is capable of. If I remove and re-insert the module I g
