Hello, we have upgraded from 2.6.27.4 to 3.6.8 kernel. We have to operate a link at 100MBit/FD, no auto-neg. It worked with the 2.6.27.4 kernel, but does no longer work with 3.6.8:
# ethtool -s eth2 speed 100 duplex full autoneg off Cannot set new settings: Invalid argument not setting speed not setting duplex not setting autoneg dmesg says: e1000e 0000:08:00.0: eth2: Unsupported Speed/Duplex configuration The card: e1000e 0000:03:00.0: eth2: (PCI Express:2.5GT/s:Width x1) 00:1b:21:22:e4:10 e1000e 0000:03:00.0: eth2: Intel(R) PRO/1000 Network Connection e1000e 0000:03:00.0: eth2: MAC: 1, PHY: 4, PBA No: D50854-003 e1000e 0000:06:00.0: Disabling ASPM L1 ACPI: PCI Interrupt Link [LNED] enabled at IRQ 18 e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conserv ative mode Does one know whats wrong here? cu, Steffen ------------------------------------------------------------------------------ Keep yourself connected to Go Parallel: TUNE You got it built. Now make it sing. Tune shows you how. http://goparallel.sourceforge.net _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
