Hi Grant
Thanks for the info, following your advise we've done the following:
We're using a PowerPC with a FEC, which is directly connected to an
ethernet switch MAC using the MII.
The MAC was set to full duplex, 100MBits, no flow control.
The stock if_fec.c during fec_eth_reset, sets the Trans
On 2009-10-26, andrew bell wrote:
> I?ve gone back to the nc_master / slave tests and monitored
> the throughput when connecting a PC to one of the boxes
> running eCos. Initially everything looked fine until I insert
> a switch between the PC and eCos box.
>
> With any switch between the PC / eC
