2016 10:59 PM
To: Ni, Ruiyu ; edk2-devel@lists.01.org
Cc: Tian, Feng ; Zeng, Star
Subject: Re: [edk2] [PATCH v2 3/3] MdeModulePkg/TerminalDxe: Set
polling rate by serial IO mode
Hi Ruiyu,
I had seen the other comments and I just needed more time to think
about them :)
Please see my comments below
, 2016 10:52 AM
To: Heyi Guo ; edk2-devel@lists.01.org
Cc: Tian, Feng ; Zeng, Star
Subject: RE: [edk2] [PATCH v2 3/3] MdeModulePkg/TerminalDxe: Set polling rate
by serial IO mode
Heyi,
I was not able to remove the blue bar in the beginning of every line if I
embedded my reply.
So I will directly
On 29 March 2016 at 08:26, Kinney, Michael D wrote:
> Ard,
>
> Many handlers running at the same TPL are ok as long as each of the handlers
> run for very short periods of time. Any event handlers that execute as
> raised TPL for extended periods of time will impact other event handlers.
>
Tha
yu ; edk2-
> de...@lists.01.org; Tian, Feng ; Zeng, Star
>
> Subject: Re: [edk2] [PATCH v2 3/3] MdeModulePkg/TerminalDxe: Set polling rate
> by serial
> IO mode
>
> On 29 March 2016 at 06:09, Kinney, Michael D
> wrote:
> > Ard,
> >
> > What is the timer rat
un...@lists.01.org] On Behalf Of Heyi
>> Guo
>> Sent: Monday, March 28, 2016 8:06 PM
>> To: Ard Biesheuvel ; Ni, Ruiyu
>>
>> Cc: edk2-devel@lists.01.org; Tian, Feng ; Zeng, Star
>>
>> Subject: Re: [edk2] [PATCH v2 3/3] MdeModulePkg/TerminalDxe: Set
01.org; Tian, Feng ; Zeng, Star
>
> Subject: Re: [edk2] [PATCH v2 3/3] MdeModulePkg/TerminalDxe: Set polling rate
> by serial
> IO mode
>
>
>
> On 03/25/2016 01:56 PM, Ard Biesheuvel wrote:
> > On 25 March 2016 at 03:52, Ni, Ruiyu wrote:
> >> Heyi,
>
pth change in timer
call back
to update the interval.
Regards,
Ray
From: Heyi Guo [mailto:heyi@linaro.org]
Sent: Thursday, March 24, 2016 10:59 PM
To: Ni, Ruiyu ; edk2-devel@lists.01.org
Cc: Tian, Feng ; Zeng, Star
Subject: Re: [edk2] [PATCH v2 3/3] MdeModulePkg/TerminalDxe: Set polling ra
t;
>
> Regards,
> Ray
>
> From: Heyi Guo [mailto:heyi@linaro.org]
> Sent: Thursday, March 24, 2016 10:59 PM
> To: Ni, Ruiyu ; edk2-devel@lists.01.org
> Cc: Tian, Feng ; Zeng, Star
> Subject: Re: [edk2] [PATCH v2 3/3] MdeModulePkg/TerminalDxe: Set polling rate
> by
Ray
From: Heyi Guo [mailto:heyi@linaro.org]
Sent: Thursday, March 24, 2016 10:59 PM
To: Ni, Ruiyu ; edk2-devel@lists.01.org
Cc: Tian, Feng ; Zeng, Star
Subject: Re: [edk2] [PATCH v2 3/3] MdeModulePkg/TerminalDxe: Set polling rate
by serial IO mode
Hi Ruiyu,
I had seen the other comments an
3/3] MdeModulePkg/TerminalDxe: Set polling rate
by serial IO mode
>
>Hi Ruiyu,
>
>Many thanks for your review.
>
>For questions 2#, I tested equation #1 with copy-paste on serial
>terminal, and found it still missing some characters when the FIFO was
>almost full (i.e. near the
;Kinney, Michael D
>Subject: Re: [edk2] [PATCH v2 3/3] MdeModulePkg/TerminalDxe: Set polling rate
>by serial IO mode
>
>Hi Ruiyu,
>
>Many thanks for your review.
>
>For questions 2#, I tested equation #1 with copy-paste on serial
>terminal, and found it still missing some c
-devel-boun...@lists.01.org] On Behalf Of Heyi Guo
Sent: Thursday, March 17, 2016 10:37 PM
To: edk2-devel@lists.01.org
Cc: Heyi Guo ; Tian, Feng ; Zeng, Star
Subject: [edk2] [PATCH v2 3/3] MdeModulePkg/TerminalDxe: Set polling rate by
serial IO mode
Calculate serial input polling rate according to
t: [edk2] [PATCH v2 3/3] MdeModulePkg/TerminalDxe: Set polling rate by
>serial IO mode
>
>Calculate serial input polling rate according to parameters from
>serial IO mode as below, to fix potential input truncation with fixed
>polling interval 0.02s.
>
>Polling interval (10
Calculate serial input polling rate according to parameters from
serial IO mode as below, to fix potential input truncation with fixed
polling interval 0.02s.
Polling interval (100ns) =
FifoDepth * (ParityBits + StopBits + DataBits) * 10,000,000 / BaudRate
However, as UEFI events will probably de
14 matches
Mail list logo
