Hi,
As per UEFI Spec 2.4A PXE_OPFLAGS_STATION_ADDRESS_READ
and PXE_OPFLAG_STATION_ADDRESS_WRITE flags are 0x.
To differentiate among them you need to check "Cdb->CPBaddr" in your UNDI
code.
Please see UEFI specification 2.4 Errata A, Section E.3.4 Page No 1972.
Thanks and Regards,
Shiva
O
ote:
>
> You should probably try to build for X64 (and EDK2) and see if the driver
> works to make sure you have not broken anything in your port.
>
>
> *From:* Shivamurthy Shastri
> [mailto:shiva.linuxwo...@gmail.com
> ]
> *Sent:* 05 December 2013 13:37
> *To:* edk2-dev
Hi,
I have downloaded UNDI driver for Intel PCIE card from the link
http://sourceforge.net/apps/mediawiki/tianocore/index.php?title=EDK file is
gig_pcie_src_4109.zip.
I compiled this for ARM platform and EDK2.
My board is Intel Gigabit CT Desktop Adapter, which has 8082574L ethernet
controller.
>
>
>
> I stopped at the step 6 after few iterations. At some point I had to add
> Base.h and I was not able to duplicate your error.
>
>
>
> My suggestions are:
>
> - Clean your build and retry to make sure there is no old files
>
> -
Hi Andrew,
On Tue, Nov 19, 2013 at 8:23 PM, Andrew Fish wrote:
>
> On Nov 19, 2013, at 6:15 AM, Shivamurthy Shastri <
> shiva.linuxwo...@gmail.com> wrote:
>
> Hi,
>
> I downloaded UEFI network driver for Intel PCIE card from
> http://sourceforge.net/apps/mediawiki
Hi,
I downloaded UEFI network driver for Intel PCIE card from
http://sourceforge.net/apps/mediawiki/tianocore/index.php?title=EDK file is
gig_pcie_src_4109.zip
I tried to compile this for ARM platform. It appears that this code only
compile with EDK1. I tried to compile this with EDK2 by changing
Hi,
How to add new commands to UEFI ShellPkg. Is there any guide for that?
--
Thanks and Regards,
Shiva.
--
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev___
Hi Amit,
On Wed, Feb 13, 2013 at 2:59 PM, Amit Mahadik wrote:
> Hello,
> OpenProtocol protocol fails while trying to build a driver for UsbIo
> call if compiled with PandaboardPkg. Please suggest any pointers.
>
> Following is the code
>
> Status = gBS->OpenProtocol (
> C
Hi Amit,
On Thu, Feb 7, 2013 at 12:50 PM, Amit Mahadik wrote:
> Hello,
> I would like to know about the Ethernet driver for
> PandaBoard.According to UEFI Network Stack Getting Started Guide
>
>
> http://sourceforge.net/projects/network-io/files/Documents/EFINetworkStackGettingStarted.pdf/
Hi Amit,
On Thu, Jan 31, 2013 at 10:22 AM, Amit Mahadik wrote:
> Hello,
>
> I am trying to boot the kernel with FDT support. I have applied the
> following patch to the kernel
> v 3.3rc1 git://gitorious.org/omap-pm/linux.gitdt_test/build_uimage_append
> added CONFIG_ARM_APPENDED_DTB=y in
> om
.net
> *Subject:* Re: [edk2] Booting Linux kernel using PXE
>
> ** **
>
> Per my reading of this log, your network driver was not successfully
> connected.
>
> ** **
>
> Please double check whether you have the right UNDI driver for your board.
>
>
>
I don't think UNDI is required.
Below line shows the driver name:
4E 000A D N N 1 0 AX88772 Ethernet Driver
MemoryMapped(0xB,0x9F75,0x9FB7137F)/FvFile(B15239D6-
6A01-4808-A0F7-B7F20F073555)
>
>
> ** **
>
> Thanks,****
>
> Ruth
>
&
0xB,0x9F75,0x9FB7137F)/FvFile(B15239D6-6A01-4808-A0F7-B7F20F073555)
On Thu, Jan 24, 2013 at 5:44 PM, Shivamurthy Shastri <
shiva.linuxwo...@gmail.com> wrote:
> Hi Ruth,
>
> Here is the log...
>
> 2.0 Shell> drivers
> T D
> D Y C I
> R
uth
>
> ** **
>
> *From:* Shivamurthy Shastri [mailto:shiva.linuxwo...@gmail.com]
> *Sent:* Thursday, January 24, 2013 7:17 PM
> *To:* edk2-devel@lists.sourceforge.net
> *Subject:* Re: [edk2] Booting Linux kernel using PXE
>
> ** **
>
> Hi Ruth,
>
> ** **
&
t;
>
> http://www.novell.com/docrep/2012/12/sles_11_sp2_for_uefi_client_best_practices_white_paper.pdf
>
>
> ** **
>
> Thanks,****
>
> Ruth
>
> ** **
>
> *From:* Shivamurthy Shastri [mailto:shiva.linuxwo...@gmail.com]
> *Sent:* Thursday, January
Hi,
Anyone did PXE booting in UEFI. I want to know the settings or steps for
booting linux kernel from UEFI.
--
Thanks and Regards,
Shiva.
--
Master Visual Studio, SharePoint, SQL, ASP.NET, C# 2012, HTML5, CSS,
MVC, Wind
Hi,
Please let me know how to set the MAC address in UEFI.
--
Thanks and Regards,
Shiva.
--
Master Visual Studio, SharePoint, SQL, ASP.NET, C# 2012, HTML5, CSS,
MVC, Windows 8 Apps, JavaScript and much more. Keep your sk
HI,
How to change directory in UEFI shell, if filesystems are shown as follows.
add-symbol-file
/home/olimar01/edk2/Build/Shell/RELEASE_RVCTLINUX/ARM/ShellPkg/Application/Shell/Shell/DEBUG/Shell.dll
0x9DF7D240
Loading driver at 0x0009DF7D000 EntryPoint=0x0009DFC01A9 Shell.efi
UEFI Interactive S
e Board. And We have used in couple of other ARM
> boards also and confirmed it is working.
>
> ** **
>
> Thanks
> Siva
>
> ** **
>
> ** **
>
> *From:* Shivamurthy Shastri [mailto:shiva.linuxwo...@gmail.com]
> *Sent:* Thursday, January 03, 2013 6:36
Hi All,
Whether UEFI USB codes are working for any ARM boards?
Anyone tested?
--
Thanks and Regards,
Shiva.
--
Master Visual Studio, SharePoint, SQL, ASP.NET, C# 2012, HTML5, CSS,
MVC, Windows 8 Apps, JavaScript and much
Hi,
Is there any uefi shell command to know the usb tree?
--
Thanks and Regards,
Shiva.
--
Master Visual Studio, SharePoint, SQL, ASP.NET, C# 2012, HTML5, CSS,
MVC, Windows 8 Apps, JavaScript and much more. Keep your ski
Hi Olivier,
Patch worked for me. But I am using build command with "-b DEBUG" option.
This give me some "unused-but-set-variable" errors.
I think following changes in the patch should work:
diff --git
a/ArmPlatformPkg/Documentation/patches/BaseTools-Pending-Patches.patch
b/ArmPlatformPkg/Document
Hi Olivier,
On Tue, Dec 4, 2012 at 12:39 AM, Olivier Martin wrote:
> I tried with the binary kernel and device tree you sent me a while ago.
> After changing the DSC file to enable booting Linux with a Device Tree:
>
> --- a/ArmPlatformPkg/ArmVExpressPkg/ArmVExpress-RTSM-A15_MPCore.dsc
> +++ b/A
Hi Olivier,
On Tue, Dec 4, 2012 at 12:39 AM, Olivier Martin wrote:
> I tried with the binary kernel and device tree you sent me a while ago.
> After changing the DSC file to enable booting Linux with a Device Tree:
>
> --- a/ArmPlatformPkg/ArmVExpressPkg/ArmVExpress-RTSM-A15_MPCore.dsc
> +++ b/Ar
Hi Andrew,
I am using Trace32 for debugging. I need COFF file for debugging. Is there
any single final COFF file for debugging?
On Wed, Nov 28, 2012 at 9:09 PM, Andrew Fish wrote:
> James,
>
> This could have to do with you looking at the object file that has NOT
> been linked, the things that
Hi,
Is there any single elf file for debugging?
On Wed, Nov 28, 2012 at 4:15 PM, James White
wrote:
> Thanks for your help.
>
> When I look at just the first few lines of the disassembled code of
> SecEntryPoint.S then I get the following output:
>
> arm-linux-gnueabi-objdump -d
> Build/ArmVE
On Wed, Nov 7, 2012 at 3:55 PM, nicolas wrote:
> ** hi, Rony:**
>
> **The problem still existed! (git clone still failed)**
>
> **My os is : Ubuntu 11.10 / git version is 1.7.5.4**
>
>
>
> **Girish has ever created a git website before:**
>
> **git clone git://github.com/girishks/Origen-EDK
On Tue, Nov 6, 2012 at 6:19 PM, Nicola Johnsen wrote:
>
>
> Hi, I'm trying to build UEFI firmware for a Samsung board. I'm following
> instructions here:
> http://sourceforge.net/apps/mediawiki/tianocore/index.php?title=SamsungPlatformPkgbut
> I cannot find where the patches like
> 0001-SamsungPl
5 seconds to skip startup.nsh or any other key to
continue.Press ESC in 4 seconds to skip startup.nsh or any other key to
continue.Press ESC in 4 seconds t.
2.0 Shell>
2.0 Shell>
2.0 Shell>
On Mon, Oct 8, 2012 at 4:09 PM, Shivamurthy Shastri <
shiva.linuxwo...@gmail.com> wrote:
>
2E7FE-0649-4FB4-BE4F-A862CA1872A9)/HD(2,MBR,0x13883578,0xC000,0x140)
>
>
> ** **
>
> Let me know,
>
> Olivier
>
> ** **
>
> *From:* Shivamurthy Shastri [mailto:shiva.linuxwo...@gmail.com]
> *Sent:* 04 October 2012 13:51
> *To:* Olivier Martin
> *Cc:* edk2
Hi,
I am trying to boot linux on samsung ARM CPU using SD-MMC card.
Whenever I am changing MMC card or for every format of MMC card, either I
need to change certain parameters in dsc file
or for every boot I need to add proper boot device entry.
I want to give UEFI proper partition number which do
Hi,
I need to boot linux kernel on Samsung board using UEFI.
UEFI works fine, also it boots linux kernel (zImage) from SD-MMC card FAT
partition.
The SoC has two cores, but only one of them is up.
The log is :
CPU0: thread -1, cpu 0, socket 0, mpidr 8000
Setting up static identity map for 0x
Hi,
Anyone knows how to mount RAMDISK image using UEFI?
I want to give RAMDISK image name and path in dsc file and
UEFI should take it from the file.
--
Thanks and Regards,
Shiva.
--
Live Security Virtual Conference
Excl
ich repository are you using ?
>
> ** **
>
> Thanks,
>
> Olivier
>
> ** **
>
> *From:* Shivamurthy Shastri [mailto:shiva.linuxwo...@gmail.com]
> *Sent:* 02 August 2012 13:33
> *To:* Olivier Martin
> *Cc:* edk2-devel@lists.sourceforge.net
>
> *Sub
to start EBL and type the command ‘devicepath’. It will print
> all the EFI Device Paths expose by your UEFI firmware.
>
> Regards,
>
> Olivier
>
> ** **
>
> ** **
>
> *From:* Shivamurthy Shastri [mailto:shiva.linuxwo...@gmail.com]
> *Sent:* 31 Ju
Hi,
I am working on some samsung board, I am new to this UEFI. I got the FD of
the image and I am trying run UEFI on the board.
UEFI is getting started without any problem. I am getting directly EBL
shell prompt. Now, I need to boot linux kernel on that.
Meanwhile, I created FAT partition on SD c
36 matches
Mail list logo
