Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff....@intel.com>
CC: Feng Tian <feng.t...@intel.com>
CC: Jiewen Yao <jiewen....@intel.com>
CC: Michael Kinney <michael.d.kin...@intel.com>
---
UefiCpuPkg/CpuMpPei/PeiMpServices.c | 87 +++++++++++++++++++++++++++++++++++++
UefiCpuPkg/CpuMpPei/PeiMpServices.h | 50 +++++++++++++++++++++
2 files changed, 137 insertions(+)
diff --git a/UefiCpuPkg/CpuMpPei/PeiMpServices.c
b/UefiCpuPkg/CpuMpPei/PeiMpServices.c
index 9a89045..960c228 100644
--- a/UefiCpuPkg/CpuMpPei/PeiMpServices.c
+++ b/UefiCpuPkg/CpuMpPei/PeiMpServices.c
@@ -763,6 +763,93 @@ PeiSwitchBSP (
return EFI_SUCCESS;
}
+/**
+ This service lets the caller enable or disable an AP from this point onward.
+ This service may only be called from the BSP.
+
+ This service allows the caller enable or disable an AP from this point
onward.
+ The caller can optionally specify the health status of the AP by Health. If
+ an AP is being disabled, then the state of the disabled AP is implementation
+ dependent. If an AP is enabled, then the implementation must guarantee that a
+ complete initialization sequence is performed on the AP, so the AP is in a
state
+ that is compatible with an MP operating system.
+
+ If the enable or disable AP operation cannot be completed prior to the return
+ from this service, then EFI_UNSUPPORTED must be returned.
+
+ @param[in] PeiServices General purpose services available to every
PEIM.
+ @param[in] This A pointer to the EFI_PEI_MP_SERVICES_PPI
instance.
+ @param[in] ProcessorNumber The handle number of AP that is to become the
new
+ BSP. The range is from 0 to the total number of
+ logical processors minus 1. The total number of
+ logical processors can be retrieved by
+ EFI_PEI_MP_SERVICES_PPI.GetNumberOfProcessors().
+ @param[in] EnableAP Specifies the new state for the processor for
+ enabled, FALSE for disabled.
+ @param[in] HealthFlag If not NULL, a pointer to a value that specifies
+ the new health status of the AP. This flag
+ corresponds to StatusFlag defined in
+ EFI_PEI_MP_SERVICES_PPI.GetProcessorInfo(). Only
+ the PROCESSOR_HEALTH_STATUS_BIT is used. All
other
+ bits are ignored. If it is NULL, this parameter
+ is ignored.
+
+ @retval EFI_SUCCESS The specified AP was enabled or disabled
successfully.
+ @retval EFI_UNSUPPORTED Enabling or disabling an AP cannot be
completed
+ prior to this service returning.
+ @retval EFI_UNSUPPORTED Enabling or disabling an AP is not supported.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_NOT_FOUND Processor with the handle specified by
ProcessorNumber
+ does not exist.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP.
+
+**/
+EFI_STATUS
+EFIAPI
+PeiEnableDisableAP (
+ IN CONST EFI_PEI_SERVICES **PeiServices,
+ IN EFI_PEI_MP_SERVICES_PPI *This,
+ IN UINTN ProcessorNumber,
+ IN BOOLEAN EnableAP,
+ IN UINT32 *HealthFlag OPTIONAL
+ )
+{
+ PEI_CPU_MP_DATA *PeiCpuMpData;
+ UINTN CallerNumber;
+
+ PeiCpuMpData = GetMpHobData ();
+ if (PeiCpuMpData == NULL) {
+ return EFI_NOT_FOUND;
+ }
+
+ //
+ // Check whether caller processor is BSP
+ //
+ PeiWhoAmI (PeiServices, This, &CallerNumber);
+ if (CallerNumber != PeiCpuMpData->BspNumber) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ if (ProcessorNumber == PeiCpuMpData->BspNumber) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (ProcessorNumber >= PeiCpuMpData->CpuCount) {
+ return EFI_NOT_FOUND;
+ }
+
+ if (!EnableAP) {
+ PeiCpuMpData->CpuData[ProcessorNumber].State = CpuStateDisabled;
+ } else {
+ PeiCpuMpData->CpuData[ProcessorNumber].State = CpuStateIdle;
+ }
+
+ if (HealthFlag != NULL) {
+ PeiCpuMpData->CpuData[ProcessorNumber].CpuHealthy =
+ (BOOLEAN) ((*HealthFlag & PROCESSOR_HEALTH_STATUS_BIT) != 0);
+ }
+ return EFI_SUCCESS;
+}
/**
This return the handle number for the calling processor. This service may be
diff --git a/UefiCpuPkg/CpuMpPei/PeiMpServices.h
b/UefiCpuPkg/CpuMpPei/PeiMpServices.h
index fe8b459..bf8244c 100644
--- a/UefiCpuPkg/CpuMpPei/PeiMpServices.h
+++ b/UefiCpuPkg/CpuMpPei/PeiMpServices.h
@@ -308,6 +308,56 @@ PeiSwitchBSP (
IN BOOLEAN EnableOldBSP
);
+/**
+ This service lets the caller enable or disable an AP from this point onward.
+ This service may only be called from the BSP.
+
+ This service allows the caller enable or disable an AP from this point
onward.
+ The caller can optionally specify the health status of the AP by Health. If
+ an AP is being disabled, then the state of the disabled AP is implementation
+ dependent. If an AP is enabled, then the implementation must guarantee that a
+ complete initialization sequence is performed on the AP, so the AP is in a
state
+ that is compatible with an MP operating system.
+
+ If the enable or disable AP operation cannot be completed prior to the return
+ from this service, then EFI_UNSUPPORTED must be returned.
+
+ @param[in] PeiServices General purpose services available to every
PEIM.
+ @param[in] This A pointer to the EFI_PEI_MP_SERVICES_PPI
instance.
+ @param[in] ProcessorNumber The handle number of AP that is to become the
new
+ BSP. The range is from 0 to the total number of
+ logical processors minus 1. The total number of
+ logical processors can be retrieved by
+ EFI_PEI_MP_SERVICES_PPI.GetNumberOfProcessors().
+ @param[in] EnableAP Specifies the new state for the processor for
+ enabled, FALSE for disabled.
+ @param[in] HealthFlag If not NULL, a pointer to a value that specifies
+ the new health status of the AP. This flag
+ corresponds to StatusFlag defined in
+ EFI_PEI_MP_SERVICES_PPI.GetProcessorInfo(). Only
+ the PROCESSOR_HEALTH_STATUS_BIT is used. All
other
+ bits are ignored. If it is NULL, this parameter
+ is ignored.
+
+ @retval EFI_SUCCESS The specified AP was enabled or disabled
successfully.
+ @retval EFI_UNSUPPORTED Enabling or disabling an AP cannot be
completed
+ prior to this service returning.
+ @retval EFI_UNSUPPORTED Enabling or disabling an AP is not supported.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_NOT_FOUND Processor with the handle specified by
ProcessorNumber
+ does not exist.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP.
+
+**/
+EFI_STATUS
+EFIAPI
+PeiEnableDisableAP (
+ IN CONST EFI_PEI_SERVICES **PeiServices,
+ IN EFI_PEI_MP_SERVICES_PPI *This,
+ IN UINTN ProcessorNumber,
+ IN BOOLEAN EnableAP,
+ IN UINT32 *HealthFlag OPTIONAL
+ );
/**
This return the handle number for the calling processor. This service may be
--
1.9.5.msysgit.0
------------------------------------------------------------------------------
Don't Limit Your Business. Reach for the Cloud.
GigeNET's Cloud Solutions provide you with the tools and support that
you need to offload your IT needs and focus on growing your business.
Configured For All Businesses. Start Your Cloud Today.
https://www.gigenetcloud.com/
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/edk2-devel
