onnect –r’ in shell to connect controllers.
>
>
>
>
> Tao >>> Assume following case: Tcp.supported called first, then IP6
>
> TCPDriverBindingSupported() fail since it failed to locate
> Ip6ServiceBinding Protocol
> then
> Ip6DriverBi
See below.
From: Tao Yuan [mailto:yuanta...@gmail.com]
Sent: Thursday, September 27, 2012 10:07 AM
To: edk2-devel@lists.sourceforge.net
Subject: Re: [edk2] Questions on EDKII Network stack
Hi Ting,
Thanks for your help. Could you please take a look at my further questions?
Thanks,
Tao
On Wed
d()/TCPDriverBindingStart be called again?
> **
>
> Best regards,
>
> Ting
>
> ** **
>
> ** **
>
> *From:* Tao Yuan [mailto:yuanta...@gmail.com]
> *Sent:* Thursday, September 27, 2012 1:15 AM
> *To:* edk2-devel@lists.sourceforge.net
> *Subject:
need
execute 'connect -r' in shell to connect controllers.
Best regards,
Ting
From: Tao Yuan [mailto:yuanta...@gmail.com]
Sent: Thursday, September 27, 2012 1:15 AM
To: edk2-devel@lists.sourceforge.net
Subject: [edk2] Questions on EDKII Network stack
Hi all,
By use EDKII iSCSI and
Hi all,
By use EDKII iSCSI and Network stack I met problems to map iSCSI target
to local block devices, when check on serial log I found following:
Intel(R) PRO/1000 5.1.01 PCI-E .Start(7EE7DC20)=EFI_SUCCESS
PciBus: SetAttributes(1) @ B0|D1|F0 Attr=0x8000; Capab=0x80078763;
Status=EFI_SU