:26
To: Olivier Martin
Cc: edk2-devel@lists.sourceforge.net
Subject: Re: [edk2] booting linux kernel using EBL
I am using edk2 developed by some one in Samsung, which might be little
older.
This edk2 works boots windows OS properly. I am using same repo for booting
linux.
To get boot manager
ich repository are you using ?
>
> ** **
>
> Thanks,
>
> Olivier
>
> ** **
>
> *From:* Shivamurthy Shastri [mailto:shiva.linuxwo...@gmail.com]
> *Sent:* 02 August 2012 13:33
> *To:* Olivier Martin
> *Cc:* edk2-devel@lists.sourceforge.net
>
> *Sub
Which repository are you using ?
Thanks,
Olivier
From: Shivamurthy Shastri [mailto:shiva.linuxwo...@gmail.com]
Sent: 02 August 2012 13:33
To: Olivier Martin
Cc: edk2-devel@lists.sourceforge.net
Subject: Re: [edk2] booting linux kernel using EBL
Yeah.. It is not going to boot manager
] booting linux kernel using EBL
Hi Olivier,
UEFI booted properly and also detecting FAT partition I made on SD card,
where zImage is present. At boot time it doesn't ask any boot options,
instead it goes directly to EBL prompt. I have taken FAT partition path
using command 'device
ly 2012 06:33
> *To:* edk2-devel@lists.sourceforge.net
> *Subject:* [edk2] booting linux kernel using EBL
>
> ** **
>
> Hi,
>
> ** **
>
> I am working on some samsung board, I am new to this UEFI. I got the FD of
> the image and I am trying run UEFI on the board.
Paths expose by your UEFI firmware.
Regards,
Olivier
From: Shivamurthy Shastri [mailto:shiva.linuxwo...@gmail.com]
Sent: 31 July 2012 06:33
To: edk2-devel@lists.sourceforge.net
Subject: [edk2] booting linux kernel using EBL
Hi,
I am working on some samsung board, I am new to this U
On 07/31/2012 01:33 AM, Shivamurthy Shastri wrote:
> Hi,
>
> I am working on some samsung board, I am new to this UEFI. I got the FD
> of the image and I am trying run UEFI on the board.
> UEFI is getting started without any problem. I am getting directly EBL
> shell prompt. Now, I need to boot lin
Hi,
I am working on some samsung board, I am new to this UEFI. I got the FD of
the image and I am trying run UEFI on the board.
UEFI is getting started without any problem. I am getting directly EBL
shell prompt. Now, I need to boot linux kernel on that.
Meanwhile, I created FAT partition on SD c
