I mean shared ethernet with a primary green lan and additional lans
on the same nic/switch, plz give it a try.
I can't say how it works with vlan but I suspect a same as with
real nic's. vlan can for example be this way:
in /etc/rc.sysinit before kickstart
modprobe 8021q
sleep 1
cat /proc/net/vl
On 7/14/2011 2:13 AM, Jaroslaw Zdrzalek wrote:
> Yes, you can have multiple red zones, no problem.
> EFW supports multiple subnets on green in manner
> of shared ethernet. This will not work if you have
> two nic's and the switches for each lan.
> You better use the orange or blue zone for
> the s
Yes, you can have multiple red zones, no problem.
EFW supports multiple subnets on green in manner
of shared ethernet. This will not work if you have
two nic's and the switches for each lan.
You better use the orange or blue zone for
the second lan. You will need to customize the
firewall rules.
R
On 7/13/2011 4:15 PM, Jaroslaw Zdrzalek wrote:
> you have multiple Uplinks but you don't have multiple LANs with EFW.
> However multiple subnets on each interface are possible (but not really
> secure).
> Firewalling is then done with interface names (ethX, ethY).
> If you want to route them out
you have multiple Uplinks but you don't have multiple LANs with EFW.
However multiple subnets on each interface are possible (but not really secure).
Firewalling is then done with interface names (ethX, ethY).
If you want to route them out via diffrent gateways then you
should use policy routing to
I'm thinking of using Endian to sit behind two routers. Long story but
there will essentially be two connections to the internet and I want to
unify things somewhat behind those (at least temporarily).
I don't need to load balance. What I really want is 2 red zones. There
will also likely be 2
Hi,
We have installed successfully Endian Firewall on our system.
System configuration is given below
CPU: Intel P4 3.00 GHz
RAM: 1 GB
HDD: 80 GB
LAN CARDS: 2 (One is on board and other is D-LINK connected on other port)
We want to add one more LAN card in this system, so it will be three lan
card
y nice GUI :).
>
> Hope this helps and someone can answer the other questions for you.
> John
>
> -Original Message-
> From: Vassilis [mailto:bigracc...@gmx.net]
> Sent: Friday, February 20, 2009 9:04 AM
> To: efw-user@lists.sourceforge.net
> Subject: [Efw-user] Multiple re
John
-Original Message-
From: Vassilis [mailto:bigracc...@gmx.net]
Sent: Friday, February 20, 2009 9:04 AM
To: efw-user@lists.sourceforge.net
Subject: [Efw-user] Multiple red interfaces
Hello!
Has any of you experience with running 2.2 RC3 with multiple red
interfaces? To increase th
Hello!
Has any of you experience with running 2.2 RC3 with multiple red
interfaces? To increase the bandwidth and also increase the uptime in
case one of the ISP's has problems.
I have searched in the documentation and also in the mailing list
archive but I havent found any solid answers to my
At 18.12 10/01/2007, you wrote:
>At 16.02 10/01/2007, you wrote:
> >hi, i setup latest version of efw ( 2.1), great job . than i
> >followed
> >http://www.nabble.com/Multiple-RED-Interface-tf1964237.html#a5394719
> >link to built second red interface. when i done my job, from the web
> >interface (
At 16.02 10/01/2007, you wrote:
>hi, i setup latest version of efw ( 2.1), great job . than i
>followed
>http://www.nabble.com/Multiple-RED-Interface-tf1964237.html#a5394719
>link to built second red interface. when i done my job, from the web
>interface ( system/ home section) of my efw i saw
hi,
i setup latest version of efw ( 2.1), great job .
than i followed
http://www.nabble.com/Multiple-RED-Interface-tf1964237.html#a5394719 link to
built second red interface.
when i done my job, from the web interface ( system/ home section) of my efw
i saw the main and link2 status were " dead l
1) First you will need to access the console via ssh.
2)Then cp /var/efw/uplinks/main /var/efw/uplinks/link2
3)Modify the /var/efw/uplinks/link2/settings file in vi to reflect the other
ISP connection. Make sure to change the RTABLE=200 to RTABLE=201.
"This value is used as name of the l
I am new to Endian, just setup my first box (2.0) and love it. I have been and still will for certian applications use m0n0wall. Anyway I have a friend who is interested in Endian and needs Dual WAN (Red) support. The roadmap says it is implimented but no interface has been built. I have searche
15 matches
Mail list logo
