Great, congratulations!
I tried to compile it and I managed to compile everything
(ptlib, opal, ekiga - well, h264 did not compile so I
disabled it) but it breaks at linking, with undefined
XInitThreads. What version of Xorg/Xlib is needed?
(addding /usr/lib64/libX11.so.6 to the linker
command di
> Could it be the ISP the one who is banning the address?
Nope, it seems to be the client. It keeps on getting
606 Not Acceptable, however, I can register from a different
computer from the same LAN. Strange but at least I know
the problem is on my side this time.
___
> Your client is playing with you...
Thanks for information! I am going to look at it more
closely then...
_
Sprievodca hernym svetom - http://hry.sme.sk/
___
ekiga-list mailing list
> I restarted it.
Still no registration here. Either it is down again or
my client is playing with me...
_
http://fotky.sme.sk - Ukazte svoje najlepsie fotky svetu
___
ekiga-list maili
> I've noticed that kind of thing in the past. It's what made me go and
> get a free account at iptel.org. Their service seems to be much more
> reliable, and it works fine with the ekiga software.
That means no video though, right?
_
Andrew & Rob: The same behaviour with my clients. They reported
they were registered but no calls could be made. After the
deregistration, all registration attemps fail with "Could
not register (Globally not acceptable)". It lasts for the last
5 hours approximately.
So it seems the server is rea
> Repeatedly cannot register from different locations
> and for different accounts. Looks like the server is
> down again.
Still no registration. Can somebody please confirm the
problem and/or (preferably) restart the server?
Repeatedly cannot register from different locations
and for different accounts. Looks like the server is
down again.
_
http://kultura.sme.sk/ - Informacny server o kulture a soubiznise
Hi Eugen,
thanks for the answer! I suspect it might actually be
a combination of more reasons causing the issue:
I experienced this also in 3.2.6 but the behaviour was
bit different - it appeared less frequently and as far
as I can tell, not before the first call (which suggests
your third rea
> To whom it might interest.
>
> When my computer has been powered on for maybe one or two days, anyone who
> calls me from an ordinary phone to > ekiga gets a busy signal. I works just
> fine when Ekiga was just started.
Welcome in the club. I have reported similar issue a week
ago to this
i Pál"
Komu: "Ekiga mailing list"
Dátum: pondelok, november 8, 2010 04:27:26
Predmet: Re: [Ekiga-list] client not receiving calls: EndedByTemporaryFailure
Hi Palo,
2010/11/8 Palo S. :
>
> Nobody has any idea what could be going on? Even the
> logs from both sides are not
Nobody has any idea what could be going on? Even the
logs from both sides are not useful? Should I file
a bug report or is this a known problem?
_
http://www.tahaj.sk - Stiahnite si najnovsie verzie vasich oblubenych programov
For a long time, I am having a problem of Ekiga client not receiving
calls sometimes, with "user not available" explanation on the calling
side. With recent upgrade to 3.2.7, the situation seems to be even
worse than before (with 3.2.6) - more calls are actually not received
than received... Aft
> There was a bug when ekiga won't receive calls when ih has previously
> received a call while in communication, but it was fixed in 3.2.7 cf.
> http://git.gnome.org/browse/ekiga/commit/?h=gnome-2-26&id=3b636f02e.
> Maybe it has not been fixed completely...
Who knows, this may be related, how
> So there is no way to work around the bug of ekiga stop working after
> some time, the only solution is to restart every time.
With 3.2.6, I get the problems of Ekiga randomly not receiving
calls, not quiting normally, not ringing etc only after the
first call - at least I never noticed them
> Hi, I am running ubuntu 10.04 and wanted to know if I could upgrade my
> ekiga 3.2.6 to 3.2.7 as some bugs occur with my current version of
> 3.2.6, such as Ekiga can't receive calls after some time and some
> incoming calls won't ring but you can answer. Since 3.2.7 is latest
> version, I figur
Predmet: Re: [Ekiga-list] Could not register (Globally not acceptable)
> how do you change it?
>
> Palo S. wrote:
> > It is an Ekiga STUN server issue. The registration works
> > when I change the STUN server.
> >
> >
> > - Originálna Správa -
> >
It is an Ekiga STUN server issue. The registration works
when I change the STUN server.
- Originálna Správa -
Od: Palo S.
Komu: ,
Poslaná: 28.12.2009 16:34
Predmet: Re: [Ekiga-list] Could not register (Globally not acceptable)
>
> Exactly the same issue here with 3.2.6 and
Exactly the same issue here with 3.2.6 and Fedora 12.
Looks like a server problem.
- Originálna Správa -
Od: Fedor Von Bock
Komu:
Poslaná: 28.12.2009 04:04
Predmet: [Ekiga-list] Could not register (Globally not acceptable)
> Hi,
>
> on ubuntu karmic i\'m using ekiga 3.2.5...When i
Hi Kevin,
he STUN is up again now but for the future, you can
change the Ekiga STUN settings in gconf configuration.
I use gconf-editor to do that. There are quite a few
free STUN servers that can be used, eg the mentioned
xten one.
P.
- Originálna Správa -
Od: Kevin Wilson
Komu:
Yes, STUN server is down. You can use another STUN server
to get Ekiga working, at least for the audio part.
P.
- Originálna Správa -
Od: Kevin Wilson
Komu: Ekiga mailing list
Poslaná: 24.10.2009 10:19
Predmet: Re: [Ekiga-list] Cannot register to ekiga.net
> Andre,
> Thanks
Thanks for restarting it, I can confirm that it works
as of now at least.
P.
- Originálna Správa -
Od: Damien Sandras
Komu:
Poslaná: 20.07.2009 14:16
Predmet: [Ekiga-list] ekiga.net
> Hi all,
>
> Ekiga.net was restarted.
>
> I\'m sorry, but I\'m away until tomorrow night. There
ekiga.net is down this weekend from some reason.
See the previous threads about the same topic...
- Originálna Správa -
Od: David Fox
Komu: Ekiga mailing list
Poslaná: 19.07.2009 21:42
Predmet: Re: [Ekiga-list] ekiga failing to register
> On Sun, Jul 19, 2009 at 11:59 AM, Paul Bar
Still down the whole day. Can somebody please restart it?
- Originálna Správa -
Od: Palo S.
Komu:
Poslaná: 18.07.2009 11:57
Predmet: Re: [Ekiga-list] server down again
>
> Down again...
>
> - Originálna Správa -
> Od: Damien Sandras
> Komu:
Down again...
- Originálna Správa -
Od: Damien Sandras
Komu: Ekiga mailing list
Poslaná: 12.07.2009 14:47
Predmet: Re: [Ekiga-list] server down again
> Le dimanche 12 juillet 2009 Ă 13:58 +0200, Michael Rickmann a ĂŠcrit :
> > Damien Sandras schrieb:
> > > Le samedi 11 juillet 2009
> >>> My girlfriend turns off ekiga, but I still see her online, when I come
> >>> back I try calling, after restarting ekiga this status is updated.
I can confirm the problem and it behaves like this on 4
different computers in 4 different networks (everywhere
where I tried it) : If the other si
Thanks for all these bugfix releases! I know it
must have been a pain. But the important thing
is that it should be ok now. I will test soon
as well (and perhaps only report any problems
later - I think the developers deserve some
rest now :)
P.
- Originálna Správa -
Od: Damien Sandra
I cannot register to ekiga.net from two computers in
different countries for around 30 minutes now. Is
there a problem with ekiga.net again?
P.
__
http://auto.sme.sk - Všetko o autách (novinky, testy, autosalón, autoškola,
porovnaj si auto)
___
It usually shows a valid address. I picked a few
of these calls and typically people just want to
test Ekiga and say that they already tried a few
other contacts but (not very surprisingly) nobody
picked it... It can be quite annoying though
(especially night calls when I forgot to
unsubscribe
If this means that the \"unknown callers\" (which
often bother several times a day) cannot find
my SIP address anymore, then it is actually
a good thing... I would actually vote for shutting
the white page down until it is not possible for
the user to remove his address from there!
Palo
-
>
> Now ekiga sees my camera. However
> (1) if it receives a call from an ekiga 3.0.1 or 3.1.0 system it seg
> faults and dies.
> It also makes the complaints
>
> ** (ekiga:22591): CRITICAL **: gm_conf_get_string: assertion `key
> /apps/ekiga/general/user_interface/main_window/size
> Anything special about those 10% cases where it does not work? Just trying
> to get a clear picture here and perhaps avoid problems, or at least minimize
> them.
symmetric NAT, broken router SIP support, port forwarding
conflicts...
> >
> > > 4. Can it be used on Linux (Debian, Ubuntu), Window
>
> (1) The call recipient sees only his own video, the video of the caller
> is never visible.
Which video codec are you using? I have similar problem
with Theora codec: the caller only sees his own video,
the recipient sees both. With H.264 it works ok, except
that the remote video only a
> This is happens surprisingly often. Wouldnt it be
> useful if the ptlib version was outputted in the
> -d4 log?
Ignore my comment. As Michael pointed out it is in
the log already and it is 3.4.4 indeed.
__
http://kultura.sme.sk/ - Informačný server o kultúre a šoubiznise
> the case, then you probably think you are running 3.0.2 with OPAL 3.4.4,
> but it is not the case.
This is happens surprisingly often. Wouldnt it be
useful if the ptlib version was outputted in the
-d4 log?
BTW \"up to 1 hour\" for online->offline means usually
many hours for me... I can se
> Le dimanche 18 janvier 2009 Ă 20:08 -0800, lifu a ĂŠcrit :
> > I\'m running ekiga 3.0 on Ubuntu 8.10 MID device. There is some
> > problems within our graphic driver, so I will have to run it remotely
> > using ssh -X to get it work around. Ekiga won\'t start, it errors in
> >
> > libnotify-M
- Originálna Správa -
Od: Palo S.
Komu:
Poslaná: 11.01.2009 20:42
Predmet: [Ekiga-list] H264: PP: Error when trying to create DL named pipe
>
> I noticed that the following sometimes happens right
> after the start of EKiga:
>
> dyna.cxx(111)
ervice eg Diamond in
Ekiga (just an example - I don\'t use it personally
so cannot say how that works but presumably ok)
Palo
>
> Palo S. schrieb:
> >> Sorry, I never read anything in freecall about sip. Maybe they use it in
> >> the background? Sorry,
I noticed that the following sometimes happens right
after the start of EKiga:
dyna.cxx(111) H264DYNASuccessfully loaded \'libavcodec.so.51\'
dyna.cxx(331) H264DYNASuccessfully loaded libavcodec library
and verified functions
h264pipe_unix.cxx(192) H264IP
> Sorry, I never read anything in freecall about sip. Maybe they use it in
> the background? Sorry, I dont know, thats too high for me yet.
>
I am afraid that you may need to use their program
to use their SMS services. Or do you know of any other
program other than theirs (also under Windows)
adset for pc->pc phones via Ekiga and all works
fine.
P.
>
>
> Palo S. schrieb:
> > - Originálna Správa -
> > Od: Judith Meili
> > Komu: Ekiga mailing list
> > Poslaná: 10.01.2009 14:24
> > Predmet: Re: [Ekiga-list] echo canceller
> >
>
- Originálna Správa -
Od: Andrea
Komu:
Poslaná: 11.01.2009 09:13
Predmet: Re: [Ekiga-list] Yet an other post on Pulseaudio
> Palo S. wrote:
> >
> >> First I need to learn how to disable pulseaudio, then I will have a better
> >> clue where the issue i
> First I need to learn how to disable pulseaudio, then I will have a better
> clue where the issue is.
>
yum remove pulseaudio
P.
__
http://kultura.sme.sk/ - Informačný server o kultúre a šoubiznise
___
ekiga-list mailing list
ekiga-li
matically
> > according to the application I opened, but no longer.
> >
> > Doug.
> >
> > On Sunday 04 January 2009 4:49:36 am Palo S. wrote:
> > > You can specify the order of sound drivers loading
> > > in your modprobe file. I have three so
> I have a similar problem. I have an Audigy sound card using ca0106, and a
> USB
> headset using snd-usb-audio. I have adapted your modprobe.conf, but how do
> you switch between them? For a while they were loaded automatically
> according to the application I opened, but no longer.
The
>
> jaysus!
> i should have don\'t that as the first thing!!!
> it works! so the old account is busted...
> thanks!
>
The simplest solutions are often the best :)
I am glad it helped,
Palo
__
http://zabava.sme.sk/ - Stránka čo usmeje ti tvár
not.
P.
>
> It says in Audio-Codecs \"Jitter-Puffer is between 20 and 500 ms
> automatically.\" What does it mean?
>
> Palo S. schrieb:
> > several possibilities:
> > external microphone
> > headphones
> > audio channels settings (disa
make a new account? if that works then you know
something was broken with your old one, if even
that does not work then you know something if
wrong with your network/other settings...
P.
- Originálna Správa -
Od: Damien Sandras
Komu: Ekiga mailing list
Poslaná: 10.01.2009 12:14
Pred
several possibilities:
external microphone
headphones
audio channels settings (disable mic boost,
put mic out to 0, lower mic record)
have you tried echo canceller in Ekiga?
P.
- Originálna Správa -
Od: Judith Meili
Komu: Ekiga mailing list
Poslaná: 10.01.2009 13:05
Predmet: [Ekiga
If you have access to another STUN server then you can
try that. It solved the problem of not being able to
register several times for me (I don\'t know why)
- Originálna Správa -
Od: Brian
Komu: \"Ekiga mailing list\"
Poslaná: 04.01.2009 13:16
Predmet: Re: [Ekiga-list] Problem with
- Originálna Správa -
Od: Judith Meili
Komu: Ekiga mailing list
Poslaná: 04.01.2009 10:07
Predmet: [Ekiga-list] [Fwd: Audio-Problems]
>
> Dear all
>
> What do I need to do? After closing skype, Ekiga is still not working.
> Always the same message below.
>
It should. Which vers
You can specify the order of sound drivers loading
in your modprobe file. I have three sound devices
in my main home computer (every device used with
different program) and the specification of order
is very reliable. These are the lines I use
(I think they are self-explanatory, if not then you
Hi Peter,
unfortunately I can\'t remember the versions of Ekiga
and Skype that caused this problem for me. It could
have been even beta versions of Ekiga/Skype that I
used for some time too. I can only say that my current
setup (Ekiga 3.0.1 from source, skype-2.0.0.72-fc5
rpm package on Fedora 8
- Originálna Správa -
Od: PETER EASTHOPE
Komu:
Poslaná: 31.12.2008 22:24
Predmet: [Ekiga-list] Re (2): Re (2): Audio-Problems
> Palo,
>
> ps> Ekiga audio did not work when Skype was running.
>
> Do you mean that you want to hear the ring
> from an incoming call to Ekiga while a
> In Debian Lenny on both a generic machine and
> an IBM NetVista, Ekiga and Skype tolerate each
> other. They can not use the sound hardware
> simultanously of course but there should never
> be a reason to.
Hm, I cannot reproduce the problem anymore. I remember
that the last time I used Sk
> > Le mardi 30 dĂŠcembre 2008 Ă 15:20 +0100, Palo S. a ĂŠcrit :
> > > >
> > > > Can you try to remove from your contact list all things related to
> > > > ekiga.net : 5...@ekiga.net, 5...@ekiga.net and so on ?
> > > > You can keep you
- Originálna Správa -
Od: Damien Sandras
Komu: Ekiga mailing list
Poslaná: 30.12.2008 15:20
Predmet: Re: [Ekiga-list] 473 Filtered destination
> Le mardi 30 dĂŠcembre 2008 Ă 15:20 +0100, Palo S. a ĂŠcrit :
> > >
> > > Can you try to remove from your co
>
> Can you try to remove from your contact list all things related to
> ekiga.net : 5...@ekiga.net, 5...@ekiga.net and so on ?
> You can keep your normal contacts.
Looks like a good shot! Running for two hours now and
still ok. Also the amount of traffic is much smaller.
The log is 400k now w
- Originálna Správa -
Od: yannick
Komu: Ekiga mailing list
Poslaná: 30.12.2008 12:40
Predmet: Re: [Ekiga-list] 473 Filtered destination
> Le mardi 30 dĂŠcembre 2008 Ă 12:00 +0100, Palo S. a ĂŠcrit :
> > I have reproduced the same problem on yet another computer
&g
> It shouldnt be skype. I need both programs. After restarting it was
> working again.
Then you should maybe complain to Skype developers?
It looks like Skype is blocking Ekiga, not the other
way around. It works in the same way for me too, I
have to quit Skype otherwise audio in Ekiga does n
I have reproduced the same problem on yet another computer
running Ubuntu with Ekiga 3.0 packaged by Yannick. So my
suspicion on distribution specificity is wrong. I am even
more wondering why nobody else complains about this...
weird.
__
Mobilné telefóny v slovenskej premiére a naja
>
> I still see SUBSCRIBE and NOTIFY and responses being exchanged. Only the
> REGISTER seems to be blocked or am I missing something ?
SUBSCRIBE and NOTIFY are only exchanged for a few minutes:
21:17:48 last REGISTER (expires 600)
21:22:46 last SUBSCRIBE (expires 300)
and then absolutely nothin
> > > > >
> > > > > Does TRUNK give the same problem ?
> >
> > TRUNK gives the same problem. Furthermore I reproduced
> > the same problem on two other computers: one in the same
> > LAN and one in completely different network environment.
> >
>
> Are you talking about the REGISTER not being r
> > >
> > > Does TRUNK give the same problem ?
TRUNK gives the same problem. Furthermore I reproduced
the same problem on two other computers: one in the same
LAN and one in completely different network environment.
Palo
__
http://sport.sme.sk - Najkomplexnejšie informácie zo športu
>
> Does TRUNK give the same problem ?
The latest TRUNK segfaults right after start.
Valgrind says
==27759== Invalid read of size 4
==27759==at 0x819F0F0: Opal::Sip::EndPoint::EndPoint(Opal::CallManager&,
Ekiga::Servic
> I set it to 3600 in gconf
> (sip:registrar_registration_timeout as well as in
> accounts_list) but it seems that both settings are
> ignored? The log still says 36000. Is there a
> separate settings at ekiga.net? Is there a way
> for me to set it?
>
Sorry for my monologue... It turned out th
> I will set it to 3600 in the client and we shall see...
I set it to 3600 in gconf
(sip:registrar_registration_timeout as well as in
accounts_list) but it seems that both settings are
ignored? The log still says 36000. Is there a
separate settings at ekiga.net? Is there a way
for me to set it?
>
> You set the registration time to 36 000 seconds in the account
> definition. It means 10 hours.
I can\'t remember setting that but it is so indeed...
> I have limited it to 20 minutes max and 10 minutes min at
> the Ekiga.net level => it should not accept 10 hours anymore.
Did not help, s
The complete log is here:
ftp://quacka.no-ip.org/pub/ekiga-problem.log
There is no call at the end I tried to close
Ekiga and then had to kill it. (I also tried to
call to the client but there is nothing about
it in the log, the server returned 408 Request
Timeout.)
Palo
__
http://auto
>
> I don\\\'t know whether this is related to the issue we
> have in this thread...
Now I know - it is related. It seems to be a pattern:
After some time (seems to be around 1-2 hours from Ekiga
start) there is no communication anymore between the
client and the server. The client still c
>
> Offline is sent back when the user is not in the database anymore.
> Perhaps it did not refresh the registration in time ? That is something
> you should look in his log : is there a REGISTER request to renew the
> registration or not.
I do not have a log from the other side, maybe I will
suc
>
> http://lists.openser.org/pipermail/users/2008-March/016618.html
>
> This reply is internally generated by the blacklists core - the
> destination IP address was blacklisted (maybe due a 50x or timeout
> to previous response). This is a self-protection mechanism to prevent
> sending reque
Recently, it happened to me several times that I could not
initialize a call although I knew for sure that the other
side was online. Also, I got similar complaints from others
not able to reach me by Ekiga but when they used eg
Ekiga->my other SIP client they reached me fine. Sometimes
(but no
: Ekiga mailing list
Poslaná: 21.12.2008 10:31
Predmet: Re: [Ekiga-list] \\\"remote user cleared the call\\\" problem
> Le samedi 20 dĂŠcembre 2008 Ă 20:33 +0100, Palo S. a ĂŠcrit :
> > > > A fix has been put into the stable branch and into TRUNK. Is that
>
> > A fix has been put into the stable branch and into TRUNK. Is that
> > something you can test ?
>
Tried to test snapshot from 18th and 19th but none of them
compiled. The (first) error message was:
../../../../lib/engine/components/opal/sip-endpoint.cpp: In member function
`virtual void Opa
Hi Colin,
I am sorry to hear that it did not help. However,
is it possible for you to try the latest snapshot?
That should contain a fix for the CANCEL messages
accepted by Ekiga that should not be accepted.
I did not have the chance to test it yet but it
should be there.
Palo
- Origináln
>
> Some of the CANCEL\'s (due to forking) should have been ignored and they
> were not.
>
> A fix has been put into the stable branch and into TRUNK. Is that
> something you can test ?
Sounds good! I should be able to test it within a few days.
Of course I\'ll post the results here as soon as
- Originálna Správa -
Od: Colin Alie
Komu:
Poslaná: 13.12.2008 23:59
Predmet: Re: [Ekiga-list] Ekiga version 2.0.12 no longer compatible
withekiga.net?
> Good evening,
>
> You\'re correct Palo. It was Damien who suggested upgrading to version 3.0.
> Sorry for the confusion and
> Palo, as per your suggestion, I upgraded to Ekiga 3.0. However, I\'m still
I don\'t think it was my suggestion, anyway good that you
tried it. Now after looking at your log I can bet that your
issue is the same as I had in \'remote user cleared the call\'
since Kamailio does exactly the sam
>
> Not sure how to fix Kamailio
It may be possible for Kamailio developers to
identify place (in the code) where Kamailio
sends this CANCEL by itself and fix...
> but I wonder if the CANCEL is not taken
> into account when it should not be.
I think that Ekiga does it correctly, at least
I ca
>
> I wonder if we should just not ignore the cancel...
> --
It seems that proper fix should be done on Kamailio.
Ignoring CANCEL for INVITE could be a workaround in
the meantime, however it would probably cause
problems in situations when invite should be cancelled
(ie when the other side ca
: Damien Sandras
Komu: Ekiga mailing list
Poslaná: 02.12.2008 13:09
Predmet: Re: [Ekiga-list] \\\"remote user cleared the call\\\" problem
> Le mardi 02 dĂŠcembre 2008 Ă 11:19 +0100, Palo S. a ĂŠcrit :
> > >
> > > A cancel can be sent if you are using forking, i
This looks like a NAT issue. You can have a look
at the \"remote user cleared the call\" thread that
I opened in November - that is another example
when the NAT settings that worked with the old
server stopped working with the new one. Maybe
a change in NAT settings could fix your problem
as it
>
> A cancel can be sent if you are using forking, ie 2 Ekiga registered
> with the same account name, from 2 different IP addresses and ports. As
> soon as one answers, a CANCEL is sent to the other one.
>
> Couldn\'t it be the case ?
It could be that due to a problem with NAT a private
IP com
The problem disappeared after I disabled forwarding
of 5060 to the called machine. So yet another NAT
issue. However the port forwarding was set a long
time ago and the problem only appeared recently,
confirming that the new Ekiga server was the trigger
of the problem. It would be nice if Kamail
>
> It looks like a bug on Kamailio (the SIP Router). Because called
> receives a CANCEL message, but caller does NOT send a CANCEL message.
Indeed - I did not notice this.
It is true that the problem emerged around the time
when Kamailio started to be used.
> I\'m not sure how to fix that :-/
I have a problem being unable to make a call
from user A to user B: it rings but the call is
immediatelly dropped after B accepts it with
\"remote user cleared the call\" on both sides.
No problem making a call from B to A though.
Seems to be always reproducible. Running 3.0.1
from source on
messages
or anything suspicious when things were compiled
with 4.3. It also seems to work with gcc-4.1.2 but
I did not test that carefully.
- Originálna Správa -
Od: Palo S.
Komu: ,
Poslaná: 28.10.2008 03:22
Predmet: Re: [Ekiga-list] [Fwd: AW: [Fwd: h264 bug]]
>
>
>
)
ekiga (3.0.1 from source with the same configuration)
x264,ffmpeg (ffmpeg-0.4.9-0.42.20071121.lvn8,
x264-0-0.10.20070819.lvn8, incl. -devel)
Yet I still H264 works on one computer and does not
on the other one.
What else could be the trigger???
Palo
- Originálna Správa -
Od: Palo S
hines.
I\'ll try to confirm whether it is a kernel issue
and if so to narrow it down, I will post my
findings here soon!
Palo
- Originálna Správa -
Od: Damien Sandras
Komu: \"Palo S.\"
Poslaná: 27.10.2008 09:26
Predmet: [Fwd: AW: [Fwd: [Ekiga-list] h264 bug]]
>
>
> The fact that you have a problem with H.264 while nobody else seems to
> have one doesn\'t mean that it is unstable and should be removed.
Sorry if it sounded rude - it was just a suggestion
of course. It was not to remove it but just to disable
by default and not because of me but because
sorry for broken link, this one should be ok:
http://mail.gnome.org/archives/ekiga-list/2008-May/msg00054.html
- Originálna Správa -
Od: Palo S.
Komu:
Poslaná: 26.10.2008 14:27
Predmet: [Ekiga-list] h264 bug
> I can reproduce the h264 bug on another machine.
> Also I foun
H264 should be disabled by default?
(It is very nasty bug since not only H264 does not work
but also Ekiga becomes unresponsible and slowly eats
all memory!)
Palo
- Originálna Správa -
Od: Palo S.
Komu:
Poslaná: 23.10.2008 17:18
Predmet: [Ekiga-list] h264 bug
>
> When trying t
>
> I modified two pages on wiki about this issue (see
> http://wiki.ekiga.org/index.php/Special:Recentchanges). Maybe disabling
> it by default is not in the end such a good idea...
>
> libexpat1-dev is in the Build-Depends field for debian (ubuntu too I
> suppose) packages. I have just ad
When trying to make a call using h264 codec, Ekiga
freezes, the image is not transferred to the remote
and Ekiga slowly eats all the memory. The -d 4
log keeps repeating:
h264pipe_unix.cxx(234) H264IPC PP: Failure on reading - terminating
h264pipe_unix.cxx(221) H264IPC PP: Error when cl
Yesterday I reported here a few issues I had with 3.0.1
and it turned out that some of them were related to
the compile time configuration. I thought it may be a good
idea to add this information to wiki (faq or additional
information)?
1. The problem with webcam not working has been solved
by usi
>
> Did you try installing the ptlib-plugins-v4l (or some similar name)
> package which provides the V4L plugin driver?
I compiled from source, but I have now sorted this
out - it was caused by opal configure script which
only enabled v4l2 support by default - simply
providing --enable-v4l di
Hi everybody,
I have compiled and tested 3.0.1 today and here is
a few problems/comments/questions that I have.
The test machine was Fedora 9, 2.6.25.6-55.fc9.i686
kernel.
1. My webcam does not work with Ekiga 3 although it
works just fine with Ekiga 2 (and works fine with
basically any other p
> Your glib is not up to date. It should not run correctly when commenting
> out that line.
>
Indeed, glib is not up to date. But I believe it should
not cause much trouble.
I understand that this code is only used for STUN
detection and since I chose to use previous settings
this code was pr
sorry - disregard 3b - the sound controls is there once
the talk is on (which is a feature I like actually)
- Originálna Správa -
Od: Palo S.
Komu: , ,
Poslaná: 07.09.2008 18:40
Predmet: Re: [Ekiga-list] PBoolean snapshot compilation problem
>
> > That OPAL bug has b
1 - 100 of 123 matches
Mail list logo
