Hi,
I have been building a K2/100 for a friend, and it has all been going
very smoothlyuntil tonight.
I had the amp installed and it put out the output it should on all bands,
but I didn't have the power calibration as good as I liked so I took the
amp out, removed the shield and set
I need to produce a couple of quality schematics. Anyone know of a
freebie CAD program to do this.
Jim, W4ATK
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub,
Hello and Happy Holidays,
All calendars have been shipped as of 14 Dec. 2004 at 9 AM.
If you received your calendar, please let me know what you think? I made the
spaces on the lower half of the calendar as big as possible so you can make
notes in the boxes.
If you would like to order a
Ron,
If you are certain it was producing near to full output with the KPA100
installed, then I would conclude that something happened when you removed
the KPA100.
I would be looking for something like a short in the coax or its connector
or something equally 'dumb' like that. OTOH, Hi-CUR
Try http://www.expresspcb.com/news.htm.
They'll even build the boards for you!
Dan / WG4S / K2 #2456
I need to produce a couple of quality schematics. Anyone know of a
freebie CAD program to do this.
___
Elecraft mailing list
Post to:
Jim,
Try CirCAD - they offer a free demo download --
http://www.holophase.com/dleval.htm.
73,
Don W3FPR
- Original Message -
I need to produce a couple of quality schematics. Anyone know of a
freebie CAD program to do this.
Jim, W4ATK
Fred K6DGW,
I was on a cruise to Alaska on the Princess Line 2
years ago. I did not ask corporate for permission to
operate. I did ask the captain of the ship and
permission was granted. My error was believing that
they would have required me to use ship's equipment.
They said I could use my own,
Old link. sri om.
try: http://www.expresspcb.com
-Original Message-
Try http://www.expresspcb.com/news.htm.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr.
Jim,
I use Eagle by Cadsoft: http://www.cadsoft.de/ and really love it! Getting
PCB's made is no problem. Just generate your Gerber files and any PCB house
will do it. I recommend AP Circuits for small quantities, they are VERY
reasonable and a 24 Hour turn around from the time they get your
I need to produce a couple of quality schematics. Anyone know of a
freebie CAD program to do this.
gschem under Linux/FreeBSD works great. Not sure about windows.
Here's a reference:
http://www.geda.seul.org/tools/gschem/
Screen shots are available.
~Don
I'm not sure whether this is a problem or not but after performing the S-meter
alignment on p. 47 of the K2 assembly manaual, the tenth bargraph LED stays
lit. It is lit whenever I turn on the rig. The AGC threshold is 3.80 Vdc at U2
pin5. I have completed Alignment and Test II with no problems
(Originally sent without a Subject)
I'm not sure whether this is a problem or not but after performing the S-meter
alignment on p. 47 of the K2 assembly manaual, the tenth bargraph LED stays
lit. It is lit whenever I turn on the rig. The AGC threshold is 3.80 Vdc at U2
pin5. I have completed
Gary,
Is the RF gain control fully advanced? - it should have been when you set
the AGC Threshold for 3.80 volts.
Have you set S-Lo and S-Hi values after setting the AGC threshold?
Did you restore the RF gain to the full clockwise position after setting
S-HI?
Any of the above would cause
On Wed, Dec 15, 2004 at 05:49:31AM -0600, James T. Jim Rogers, W4ATK [EMAIL
PROTECTED] appears to have written:
I need to produce a couple of quality schematics. Anyone know of a
freebie CAD program to do this.
Somebody has already mentioned gschem, but that is just one of the
gEDA tools.
THANKS TO ALL WHO REPLIED.
I DOWNLOADED ONE OF THE SUGGESTED PROGRAMS AND HAVE COMPLETED THE TASK.
73 JIM, W4ATK
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change,
Genero Gonzalez EA1EPM, please contact me at [EMAIL PROTECTED] The email
address you gave is not working.
73,
Mychael
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr.
Great calendar, Ron! I hope everyone has seen one at one time or another
because they are a very nicely produced and some very excellent pictures.
Mine is on the wall today!
72 de Ken N2CQ
- Original Message -
From: Ron Polityka
To: [EMAIL PROTECTED]
Sent: Wednesday, December 15,
K1-2 + 4 KNB No smoke on initial power up,What is a decent asking price
these days? thanks, John KF7OM
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub,
Original Message
Subject: [NCCC] T32
Date: Wed, 15 Dec 2004 22:59:57 +
From: Alan Eshleman [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Here's the T32 report:
Doug (N6TQS) and I with our respective XYLs arrived on Christmas Island
on December 7. Christmas Island is a 5-hour
Hello all,
1. Christmas Village Covered Bridge # 38-06-g in Berks County, PA
2. 12/16/2004
3. 2000 utc until 2300 utc
4. 40m, 17m 20m ssb ARCBS Suggested Frequencies
I will send out a photo qsl card of the covered bridge with its lights
on at night. Please send an SASE with # 10 envelope
I'm selling one of my K2s, s/n 3155, which has the following options
installed: KNB2, KAF2,
KSB2 K160M. I purchased this K2 in Dec. of 2002, and built it in 2003.This
K2 was built with the K2 toroid kit from The Toroidguy, AA3WF. Price is
$750, including shipping. Email me at w2vdatarrl.net or
21 matches
Mail list logo