RE: [Elecraft] Low receiver sensitivity

2005-05-12 Thread W3FPR - Don Wilhelm
My guess is that somewhere in writing that example the numbers changed (likely because the author wanted the result to be 30 dB instead of dealing with 29.6 dB and explaining away the fact that the tenths digit is insignificant so should be rounded up). 1.48 *is* the log of 30, so apparently the

Nye Viking Master key was Re: [Elecraft] J-37

2005-05-12 Thread Michael Babineau
Mike / KK5F wrote : My favorite straight key isn't any of the many military keys I have. It is the commercial Nye Viking Model 330-001 Master Key, which comes with a nicely weighted base, and with enclosed keying contacts in the base that keep all voltages off the exposed key parts.

[Elecraft] N2CQ QRP Contest Calendar May 14-31, 2005

2005-05-12 Thread Ken Newman
~~ N2CQ QRP CONTEST CALENDAR May 14-31, 2005 ~~ Mid-Atlantic QSO Party (CW/SSB/FM) ... QRP Category May 14, 1600z to May 15, 0400z May 15, 1100z to 2400z Rules:

Re: [Elecraft] TNX! - Off topic: beginner kit recommendations?

2005-05-12 Thread Mike Markowski
Mike Markowski wrote on 05/11/05 15:28 ET: My 11 year old son KB3KYB has been fascinated by my recent K2 kit building. [...] Wow, guys, I want to say thanks to each and every one who responded both on and off list! I didn't expect nearly so many replies. All are very helpful, and now I have

[Elecraft] J-37/J-38

2005-05-12 Thread Jeremiah McCarthy
The J-37 I have is a KY-116G...Very plain, austere key...IMHO it is obvious that the 2 J-38's are of far superior construction, especially the pivot bearings...The J-38's also have a shorting switch, the J-37 does not, although I would never use that feature anyway... I have a straight key

[Elecraft] A to B conversion

2005-05-12 Thread Tom Hoedjes
Hi there, Long time being on this list due to K2 number 716 Now I updated the rig to a Rev B and have the following problems. Output without AT all OK When I put the AT between then no relays are heard and the display shows LO P In the menu all settings L0 through C0 the relays are clicking.

Re: [Elecraft] Low receiver sensitivity, XG1 example

2005-05-12 Thread Bob - W5BIG
Line B. of the example should read : log(33)=1.52 Apparently there was a typo in line B that propagated into line C. The log of 30 is 1.48, that's where the value of 1.48 in line C came from. Example should read: A. R=1.0/0.03 = 33 B. log(33)=1.52 C. 20*1.52=30dB D. MDS= -107dBm - 30dB =

[Elecraft] Which hand do you use?

2005-05-12 Thread Fred Jensen
Thanks to all who have responded to the Handedness survey (49) so far. I'm going to be in Reno Fri - Sun (Va Hospital appt and weekend with with #2 son and family) . Still time to get included ... I'm going to publish the results on Tue, 17 May. Please '86' my statement that comments will

SOLD [Elecraft] FS: K2/100 SOLD

2005-05-12 Thread NZ8J
The K2/100 has been sold ... thanks Tim NZ8J - Original Message - From: NZ8J [EMAIL PROTECTED] To: elecraft@mailman.qth.net Sent: Monday, May 09, 2005 2:26 AM Subject: [Elecraft] FS: K2/100 I have for sale a K2/100 (serial number 4486) it has the following options: SSB NB 160 meters

[Elecraft] **SOLD** FS: Schurr Profi-2 CW Paddle *SOLD**

2005-05-12 Thread NZ8J
The key has been sold... Thanks Tim NZ8J - Original Message - From: NZ8J [EMAIL PROTECTED] To: elecraft@mailman.qth.net Sent: Monday, May 09, 2005 2:56 AM Subject: [Elecraft] FS: Schurr Profi-2 CW Paddle Lots of cw operators here, so. Excellent condition, very nice paddle, read the

[Elecraft] **UPDATE** Trade Wilderness Sierra for Elecraft KX1 **UPDATE**

2005-05-12 Thread NZ8J
Will also take cash offers or trade for a small 100 watt solid rig of some type.. please make offer if you're interested Thanks Tim NZ8J - Original Message - From: NZ8J [EMAIL PROTECTED] To: elecraft@mailman.qth.net Sent: Monday, May 09, 2005 2:51 AM Subject: [Elecraft] Trade Wilderness

[Elecraft] QST: CW vs Text Message Contest on NBC's Tonight Show Friday

2005-05-12 Thread Art - W6KY
Posting this because of the CW component. Hi All, Christie K0IU at HRO Burbank just informed me that Chip K7JA (Yaesu) and a traffic handler friend will be competing on NBC's Tonight Show with Jay Leno against a pair of cellphone text messengers to see who can transmit a message the

Re: [Elecraft] QST: CW vs Text Message Contest on NBC's Tonight Show Friday

2005-05-12 Thread Margaret Leber
Art - W6KY wrote: I know Chip. Why do I think the 'CW' will easily beat the cell phone message system... Because it already has: http://www.timesonline.co.uk/printFriendly/0,,1-2-1571664,00.html And in other news, would you believe broadband over gas line? http://www.nethercomm.com Ya

Re: [Elecraft] Which hand do you use?

2005-05-12 Thread vze3v8dt
Of course the results could be skewed since it is not a completely random survey as well. That is, you are tallying results from only those who responded. Maybe those folk who are left handed felt more compelled to respond than those who are right handed. Interesting, nonetheless, as to

RE: [Elecraft] QST: CW vs Text Message Contest on NBC's Tonight ShowFriday

2005-05-12 Thread EricJ
The Guinness World's record for their stock sentence is 57.75 seconds. That works out to a leisurely 24 wpm. I don't see any contest here as long as Chip can send better than 24 wpm. Here's the Guinness sentence required for record attempts: The razor-toothed piranhas of the genera Serrasalmus

[Elecraft] k2: no cw sidetone anymore...

2005-05-12 Thread Ed Finn
I put in a k60xv board and the new firmware. i also did the cw bandwidth mod. now i have no cw sidetone. any ideas? it was just fine before the mods. ed wa3drc ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post

[Elecraft] Tuner efficiency question

2005-05-12 Thread Parker Buckley
I've been using my QRP K2 for the last 2-3 years with a full sized Palstar tuner. I use a variety of antennas from 160 to 10 meters, fed with coax, ladder line, choke baluns, the Elecraft balun, etc. I'm thinking about going to an auto tuner (Dayton Hamvention coming). Has anyone compared the

[Elecraft] for interested Dayton attendees

2005-05-12 Thread Larry Phipps
I will be demo'ing my E-Meter digital wide dynamic range power/SWR meter at the SteppIR booth at Dayton this year. The E-Meter will be of interest to Elecrafters bcause it provides accurate power readings from 10mw to 2500W, and accurate SWR readings from 50mw to 2500W. The demo will

[Elecraft] K2 4875 ALIVE!

2005-05-12 Thread Yves Dussault
Hi Gary. I'm glad to say that my K2 is now fully alive! I had a bad solder joint on the 12 v line to the final amp. Now proceeding with construction of SSB and ATU. Thanks for your help. 73's Yves Dussault-VE2ATD Laval, Québec.___ Elecraft

RE: [Elecraft] k2: no cw sidetone anymore...

2005-05-12 Thread Ron D'Eau Claire
Ed WA3DRC wrote: I put in a k60xv board and the new firmware. i also did the cw bandwidth mod. now i have no cw sidetone. any ideas? it was just fine before the mods. -- Check your sidetone source, Ed. MENU, STL press/hold MENU to enter sidetone level set mode, the tap

RE: [Elecraft] k2: no cw sidetone anymore...

2005-05-12 Thread EricJ
The new firmware has a new submenu that allows you to select whether sidetone comes from U6-25 or U8-1. With the mods required with the new firmware, you don't have a choice. You MUST select sidetone from U8 or it won't work. Eric KE6US -Original Message- From: [EMAIL PROTECTED]

Re: [Elecraft] k2: no cw sidetone anymore...

2005-05-12 Thread Ed Finn
guys, tnx! found it! ed wa3drc - Original Message - From: EricJ [EMAIL PROTECTED] To: 'Ed Finn' [EMAIL PROTECTED]; elecraft@mailman.qth.net Sent: Thursday, May 12, 2005 11:08 PM Subject: RE: [Elecraft] k2: no cw sidetone anymore... The new firmware has a new submenu that allows you

RE: [Elecraft] Which hand do you use?

2005-05-12 Thread Craig Rairdin
Thanks to all who have responded to the Handedness survey (49) so far. Out of 49 respondents, and a world average of 10% left-handers (that would be 4.9%), it seems my friend might have been right. Either the fraction of hams who are sort of to really left-handed is larger than 10%, or

Re: [Elecraft] Tuner efficiency question

2005-05-12 Thread Don
Parker et al, QST did a review and test of a bunch of balanced tuners a year or so back. I don't remember too much of it now but remember being shocked at how high the losses typically were. As I recall efficiency ran in the 65 to 75 percent range for many of them. The Johnson matchbox was

Re: [Elecraft] Tuner efficiency question

2005-05-12 Thread John, KI6WX
Parker Don; I haven't tried to measure the efficiency of the Elecraft tuners. It is a fairly difficult measurement to make correctly when the input and output impedance are significantly different. However, there are two effects to consider in tuner efficiency. At high power, an

Re: [Elecraft] Tuner efficiency question

2005-05-12 Thread vze3v8dt
I haven't had lots of different tuners to compare myself, but I do have a Johnson KW Matchbox tuner. It does a great job on Balanced lines. I didn't really know about the Palastar but just checked it out on the website. Looked like an interesting tuner. But to me the downside of it was