I'm assuming it was probably just a typo on the order page but being
that I just got an FM filter for Xmas I'm a bit curious.
On Fri, 2010-01-15 at 14:59 -0800, Julian, G4ILO wrote:
>
>
> Brett Howard wrote:
> >
> > Whats the difference between a KFL3B-FM filter and a KFL3A-FM filter?
> >
>
Ok so I decided to do the IF mod as the P3 will be ordered when it comes
out and I'd like the increased sensitivity. I'm copying elecraft and K3
support cause I wanted to ask a simple question (as well as share the
results). First my question, I didn't have any 13K ohm resistors in
0805 size. So
I have a low resistance on the power poles for my first resistance check
and R36, but U12 and U13 are OK. I disassembled the sides and front
panel, checked for missed masking tape or other issues,reassembled
everything, and have repeatable low results. I verified resistance
measurements by che
Dave,
Thanks for posting this.
I'm going through the exact same exercise with my KX-1 KXAT1 and
Icom703+. Glad to know I'm not alone. The Icom is able to tune just
fine and when I switch the KX1 does not tune all bands – not on 40M.
The KX1 tuner is optimized for shorter lengths of
Dave,
Thanks for posting this.
I'm going through the exact same exercise with my KX-1 KXAT1 and
Icom703+. Glad to know I'm not alone. The Icom is able to tune just
fine and when I switch the KX1 does not tune all bands – not on 40M.
The KX1 tuner is optimized for shorter lengths o
The 16 feet of window line makes me wonder if you're not trying to do
a half-size G5RV, but got the top dimensions wrong. It would be 51'
(instead of 67 which is REALLY bad on 20 meters), or a little longer,
say 54' if you wanted to load on 17m and 12m.
My K2/10 and the auto tuner will match most
Puting the K3 together is the only way to go. As stated in previous
emails, when a mod comes up, you already have a good idea on how to do
it. For example I put in the new DSP board. I did have the assembly
book infront of me. Short of losing a few parts and cracking a knob.
It was long, bu
I was going to say, all of that being complained about, can be set any
way you want. Try the SHIFT control on the front panel. Set the
crossover *anywhere you want it*. The SHIFT setting is remembered by
mode.
Being able to hear down there was specifically requested by some who
do not share your
One *could* pin the K3 button over the Icom logo on those red hats!
I don't wear hats myself, so I am happy with the Elecraft shirts and the
K3 button.
73,
Don W3FPR
rfenab...@gmail.com wrote:
> Snip
>
> And handbags?
> Kevin
> VK3DAP / ZL2DAP
>
> End Snip
>
> And Beer Coolers, heck they got
Why not Elecraft Patches suitable for the fans to sew onto Hats, Jackets,
Shirts, Pinafores...etc...(:-))
73"s
Gary
VK4FD
Sent via BlackBerry® from Telstra
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
H
(Snip)
Dahlings,
I would just KILL for an Elecraft handbag and powder compact.
(End Snip)
Eeee-yew
Pass
Grin
73's and 88's..
Gary
Vk4FD...(:-))
Sent via BlackBerry® from Telstra
__
Elecraft mailing list
Home: http://mail
Dahlings,
I would just KILL for an Elecraft handbag and powder compact.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This lis
How about a hat that just says "Elecraft", as Kevin suggests, and then some
add-on patches or pins for the hat that describe what rigs you have?
Actually, I don't care much for baseball type caps--they don't provide
enough shade from the AZ sun! I do like bucket hats though! I'm not
holding m
>>
>> Maybe most people simply don't complain? I have lots of friends with
>> K3s (I mean LOTS) and I am not aware of even one who does NOT notice
>> the delay. Of course, all my friends are contesters, so maybe we are
>> a "picky" group. :-)
"Picky" ... hm. I'd worry most about the fact
Snip
And handbags?
Kevin
VK3DAP / ZL2DAP
End Snip
And Beer Coolers, heck they got K3 Metal badges for Suspenders...(:-))
73's
Gary
VK4FD
Sent via BlackBerry® from Telstra
__
Elecraft mailing list
Home: http://mailman.qth.net/mailm
check this out. This op clearly is proud of their 160m SSB qrg
operation. With this approach, you can customize any way you like
http://i.ehow.com/images/GlobalPhoto/Articles/4581944/BrownieGirlScout1.07-main_Full.jpg
tic
de Doug KR2Q
___
Who pays for hats that are given away? In the end, the customers do, of
course. Elecraft has small, informative, cost effective magazine ads that
maximize the return on their advertising budget by targeting their niche
market.
They don't have broad product lines as the Japanese companies do, so
> Lyle said:
> "...Most people do not notice..."
>
> Maybe most people simply don't complain? I have lots of friends with
> K3s (I mean LOTS) and I am not aware of even one who does NOT notice
> the delay. Of course, all my friends are contesters, so maybe we are
> a "picky" group. :-)
I also
On Fri, 15 Jan 2010 19:29:33 -0500, DOUGLAS ZWIEBEL wrote:
>Maybe most people simply don't complain?
ALL digital systems have some delay (known as "latency") for
two reasons. First, there must be A/D and D/A conversion.
Second, any DSP system requires some processing cycles to do
what it does.
And the first thing I'm going to do is take *speech* (not speeth) therapy from
her. Sorry about the typo.
Al W6LX
- Original Message
From: Al Lorona
To: Elecraft Reflector
Sent: Fri, January 15, 2010 5:37:00 PM
Subject: Re: [Elecraft] monitor delay
I just consulted with my wife abo
I am listening on 7165 now,its 01:45 UTC
AD4C
"For a refined ham it is compulsory to own a k3"
--- On Sat, 1/16/10, williams...@pbtcomm.net wrote:
From: williams...@pbtcomm.net
Subject: Your new toy
To: ad4c2...@yahoo.com
Date: Saturday, January 16, 2010, 1:25 AM
Hector,
Are you still on
yes Bob,very confortable,I have been dxing and ragchewing for 2 hours now on
40M and I don't feel them on my ears,I cut the lows with the EQ and my audio
goes now from 150 to 3100hz,its easy to EQ any mic wiith the K3.
I just ended a QSO with W2QN few mins ago and he reported me excellent TX audi
I just consulted with my wife about this. She is a speeth pathologist and
audiologist.
There is actually a slight benefit to be gained by delaying the monitor signal
ever so slightly. The benefit is you hear yourself a bit more accurately than
if there were no delay whatsoever.
The reason is c
I just received my CM-500s and am using the rear mic jack. Works fine that
way with lo gain, bias on.
As Jim reported, the mic has a lot of gain. It's quite bassy compared to the
Heil but the EQ takes care of that.
I opened the package and 10 minutes later I'm all set. The ear pieces are
nice and
Hector,
Glad you like it. I have been using mine for months. But with the K3 rear
input, you do not need the battery bias box. The K3 will supply the bias you
need.
Wes N7WS
--- On Fri, 1/15/10, Hector Padron wrote:
> From: Hector Padron
> Subject: [Elecraft] First report about my new Y
If some one might be interested to hear how my new Yamaha CM500 sounds and also
see the audio graph,clcik on this link to download them:
http://www.ad4c.us/Elecraft%20K3/shared%20files%20from%20K3%20users/AD4C%20recordings%20on%20his%20K3/Yamaha%20CM500_/
Thanks
AD4C
"For a refined ham i
My only current cap I wear is from Bulleit Bourbon... I would wear an
Elecraft cap if I had one...
Gary
Ka1j
> Snip
>
> Cor, elecraft freebee hats, you guys do get spoilt over there. I once
> got a Yaesu baseball cap at our HF convention years ago, but a K3 cap
> would be real cool!
>
> Ke
To be honest... I always loved passing the Azimuth table at Dayton.
Yes...
Gary
KA1J
> Don't bet on free hats or tee shirts, or scantily-clad women handing them
> out. Unless Eric's head counts towards that last...
>
> Got one of those K3 buttons here, from when Eric attended the New England
>
I think Elecraft should give out P3 hats when they start taking P3 orders.
73, Fred AE6IC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mai
Dave,
If you did not disconnect the KAT2, then please tell us the setup (all
the connections) when you have SWR readings below 1.5.
That may be capable of providing some sort of clue.
73,
Don W3FPR
djmd wrote:
>
> And re: your follow up - all the testing was done with the KAT2. I have
> never d
oh, and yes, I was definitely getting a 1:1 on the KAT2 between the radio and
the dummy load. I put the dummy load in at all points and saw 1:1.
--
View this message in context:
http://n2.nabble.com/High-SWR-on-20-and-40-tp4401077p4402311.html
Sent from the [OT] mailing list archive at Nabble.
It's the BL-2 switched balun that I have been using, and have tried both
modes. Forgot that detail. I have also tried one of those baluns built from
PVC - can't remember the manufacturer. It's a 1:1 as well. Same results.
No analyzer yet, but I really should think about getting one. Planning on
Well folks,finally after 2 months wait my boomset from Yamaha,arrived this
afternoon.
It look and feel very professional,the headset is big enough to cover my ears
completeley,it isolate me from the outside world,they feel confortable.
When I plug it into my K3 front panel phones jack,my first im
Lyle said:
"...Most people do not notice..."
Maybe most people simply don't complain? I have lots of friends with
K3s (I mean LOTS) and I am not aware of even one who does NOT notice
the delay. Of course, all my friends are contesters, so maybe we are
a "picky" group. :-)
I found it better to
Snip
Like me, coz u like fosters too much.hic
Ken..G0ORH
End Snip
Fosterswe export the cheap stuff and keep the Premium ( Gold) for
our own discerning taste..(:-))
Is it 5 O'clock somewhere?
73's
Gary
VK4FD
Sent via BlackBerry® from Telstra
That's why I didn't say K3.
73, Mike NF4L
Kevin Rock wrote:
> I don't think I would want just a K3 hat. I would really like an Elecraft
> hat. I have a number of their shirts and wear them at Field Day and to the
> ARES meetings. The problem with having a K3 hat is the folks at Elecraft
> w
Hats, hats, we don't need no "stinkin" hats!!!
http://www.flickr.com/photos/ak5x/4277091489/
Bill Hammond-AK5X
wham...@aol.com
a...@mac.com
a...@sbcglobal.net
K3 #69
K2/100 #4637
K1 #2033
KX1 #1023
T1
__
Elecraft mailing list
Home: h
Wes Stewart wrote:
>
> If I use my XG2 as a source into the K3 and set the SSB BW to the default
> settings for my 2.8KHz 8-pole filter (100Hz to 2.9KHz) the signal which is
> S9 at its peak is still S7 at zero beat. A 100 Hz beat note on the wrong
> sideband is still S3 and a 200 Hz beat is >
I don't think I would want just a K3 hat. I would really like an Elecraft hat.
I have a number of their shirts and wear them at Field Day and to the ARES
meetings. The problem with having a K3 hat is the folks at Elecraft would also
need to order K1 hats, K2 hats, KX1 hats, plus hats for each
I have for sale a set of EC2 Enclosure panels to remote the KAT100 + add the
KPA-100 if you wish,
includes all panels with the exception of the top panel.
I will ship lower 48 for $25.00 or trade for Plank EC2 enclosure.
Contact me off list at:
krenner1...@msn.com
Kurt/K0ARO
___
On a more frivolous note, will there be any goodies from the Elecraft
candy store for sale, or is it show only?
Elecrafters ever get together for a meal or a few cool ones?
Mike NF4L
__
Elecraft mailing list
Home: http://mailman.qth.ne
Well,because I did not like dust in my shack,then I sold my ProIII and my
FT-2K,just the K3 remains here and I keep clean and shining.
AD4C
"For a refined ham it is compulsory to own a k3"
--- On Fri, 1/15/10, WW2PT wrote:
From: WW2PT
Subject: Re: [Elecraft] Hamfest
To: "Iain MacDonnell -
Snip
YOU AT LEAST GOT SOMETHING USEFUL!!!
WANT TO TRADE.. HI HI...
73,
BOB
K2TK
End Snip
Bob,
You asking for Beer Holder or what's in it?
Pass on the item help by the holder...(:-))
H...maybe they know me well after all?
ROTFL
73's
Gary
VK4FD
Sent via BlackBerry® from Telstra
If I use my XG2 as a source into the K3 and set the SSB BW to the default
settings for my 2.8KHz 8-pole filter (100Hz to 2.9KHz) the signal which is S9
at its peak is still S7 at zero beat. A 100 Hz beat note on the wrong sideband
is still S3 and a 200 Hz beat is >S1.
The equalizer has no effe
I would imagine, judging from the ads, that a factory built K3 may have a
slightly higher resale value but that doesn't matter to me since I doubt I'll
ever sell mine!
Also, since I saved nearly $400 building it that's probably a wash anyway.
I sure enjoyed assembling the radio and it definitel
Hello Gentleman,
There is another advantage for kit version. For a non-radio man like myself,
the assembly process enables me to understand the architecture of a modern
transceiver. It is educational.
73
Johnny SIU VR2XMC
- 郵件原件
寄件人﹕ Doug Turnbull
收件人﹕ James Sarte ; r...@aol.com
Oh I agree with you 100% Doug. I "built" my K3, and was glad I did when it
came time to install some modifications.
73 James K2QI
-Original Message-
From: Doug Turnbull [mailto:turnb...@net1.ie]
Sent: Friday, January 15, 2010 5:45 PM
To: 'James Sarte'; r...@aol.com; elecraft@mailman.qth
Brett Howard wrote:
>
> Whats the difference between a KFL3B-FM filter and a KFL3A-FM filter?
>
I'd like to know too.
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html
--
View thi
Merv Schweigert wrote:
>
> I think that has been altered from really good suppression to just so so
> from the demand of users to go to the lower audio freqs. I complained
> about it in private and they shifted the offset a little to make it some
> better, for me I need the supression, not t
James and other K3 users,
There is one other advantage of the kit. Having assembled the radio
one has a better idea as to how to install future hardware modifications or
additions. It may be a small advantage but I believe it is a real one.
73 Doug EI2CN
-Original Message
I think the K3 goes together much better then a PC. I built my K3 a week ago
and I am still in awe of the precision of engineering that went into that K3
kit. Parts went together smoothly just as if they were designed to do that --
of course, which they are but the fit was perfect.
There is o
Hi Dick,
Alignment of the K3 is performed either by using a computer utility or via
the front panel. You don't have to "adjust" anything. Also, assembly of
the K3 is like putting a PC together. There is no soldering involved. The
only difference between one option and the other is time and mon
no, I don't really notice it
but the (quarter to almost 1 sec) delay while operating full duplex on
high orbit satellites AO-10, AO-13 and AO-40 was VERY annoying and often
made me misspeak, almost like my tongue tripped over itself.
Mike
Tom Boucher wrote:
> Does anyone else find the pro
>
> 2) Since the new DSP mods extends the bandwidth down to minus DC, implement
> phasing detection to improve the opposite sideband rejection. Even without
> the bandwidth extension, the SSB opposite sideband rejection is not the
> greatest.
>
> Wes N7WS
>
I think that has been altered
Snip
Cor, elecraft freebee hats, you guys do get spoilt over there. I once
got a Yaesu baseball cap at our HF convention years ago, but a K3 cap
would be real cool!
Ken..G0ORH
End Snip
Gee whiz, us Colonial Criminals don't even rate a JA manufacturer hat of any
kind...instead we get Beer C
I'll be the guy in the Yaewoodcom vest then. :-D
Mike
Bruce Beford wrote:
> Don't bet on free hats or tee shirts, or scantily-clad women handing them
> out. Unless Eric's head counts towards that last...
>
> Got one of those K3 buttons here, from when Eric attended the New England
> ARRL convent
Plant a seed, who knows?
Mike
Iain MacDonnell - N6ML wrote:
> On Fri, Jan 15, 2010 at 11:12 AM, Mike wrote:
>
>> Who from Elecraft is coming to the Orlando hamfest and what color are
>> the handout hats going to be?
>>
>
> Think you're getting confused with Yaesu there, OM :)
>
> I would
Please advise what advantages there are to purchasing a Factory Assembled
and Tested K-3 vs. a Kit? Such as, what sections of the K-3 will be better
aligned by the factory? Sorry if this is a repeat question, I couldn't
find related results searching the archives.
73,
Dick- K9OM
My other rig is... sold.
:-) de WW2PT
On Jan 15, 2010, at 3:04 PM, Iain MacDonnell - N6ML wrote:
> I would buy an Elecraft hat. I bought a T-shirt at Dayton last year.
> "My other rig is dusty". So true!
__
Elecraft mailing list
Ho
Don't know about hats, but T-shirts are available at:
http://webshop.studio100.be/k3/t-shirt-ik-was-er-bij.html
Just joking guys, over here in ON and PA, K3 is a
locally-known-world-famous-kiddies band. They actually have some good tunes
written by top producers.
Enjoy your weekend,
73 de Gle
Don't bet on free hats or tee shirts, or scantily-clad women handing them
out. Unless Eric's head counts towards that last...
Got one of those K3 buttons here, from when Eric attended the New England
ARRL convention in August '08. I hope Elecraft gets a booth up here again
this summer.
Have fun i
How about this T shirt : " I love my K3,my other radios are for sell" that is
not a joke,they were sold at Orlando hamfest 3 years ago,friend of mine was
earlier than me and purchased it,I don't have one but it look cool.
AD4C
"For a refined ham it is compulsory to own a k3"
_
> I've not noticed any significant delay in the TX monitor, and I know I
> would find it disconcerting if it was there. Not sure if TX EQ, or
> some other option, might introduce such a delay.
The delay is due to: audio input anti-aliasing filter in the A to D, TX
AF filtering, phase shift netwo
I think he would be better off throwing away the window line and eliminating
the tuner.
Cut the length of the dipole for resonance on 40M and then add a 20M dipole in
parallel at the feed point. There will be some interaction, which can be
lessened by orienting the dipoles at right angles to
On Fri, Jan 15, 2010 at 11:12 AM, Mike wrote:
> Who from Elecraft is coming to the Orlando hamfest and what color are
> the handout hats going to be?
Think you're getting confused with Yaesu there, OM :)
I would buy an Elecraft hat. I bought a T-shirt at Dayton last year.
"My other rig is d
Yes indeed,it will be the coolest gift from Elecraft,I still have some K3
badges,round,metal,in orange color they gave us two years ago at Orlando.
AD4C
"For a refined ham it is compulsory to own a k3"
--- On Fri, 1/15/10, Ken Chandler wrote:
From: Ken Chandler
Subject: Re: [Elecraft] H
Cor, elecraft freebee hats, you guys do get spoilt over there. I once
got a Yaesu baseball cap at our HF convention years ago, but a K3 cap
would be real cool!
Ken..G0ORH
Sent from my iPhone
On 15 Jan 2010, at 19:12, Mike wrote:
> Who from Elecraft is coming to the Orlando hamfest and w
Great,then I can pick up a hat with a big "K3" in it,I used to have ones for
the big three J brands but I gave them away,so hopefully our friend Wayne will
bring a big case full of them,please don't give them to non K3 users.
AD4C
"For a refined ham it is compulsory to own a k3"
--- On F
Dave,
Is that a 1:1 balun or a 4:1 balun. Usually a 1:1 works better, but
whichever balun you are using, try the other one and see what happens.
Do you have an antenna analyzer? or can you borrow one? If so, what is
the impedance at the end of the coax? Both the resistive and reactive
compo
Hello,
I have been trying to troubleshoot my antenna system, and have been trying
to avoid the dreaded "high swr" post, but I've run out of ideas, so I'm
turning here.
First let me explain my system. 67' dipole fed by 16' of window line. That's
connected to an Elecraft balun. From the balun, th
I've not noticed any significant delay in the TX monitor, and I know I
would find it disconcerting if it was there. Not sure if TX EQ, or
some other option, might introduce such a delay.
By the way, I *do* get audio feedback if I use an external speaker and
the TX monitor.
~Iain / N6ML
On F
Never noticed it but I noticed the absence of feedback. So probably the delay
is large enough to avoid feedback but small enough to not be noticeable by
many (myself included).
Ignacy
Tom Boucher wrote:
>
> Does anyone else find the processing delay in the sidetone monitor most
> disconcerting
If it's not too late I would like to add another couple of requests.
1) Add Accukey emulation so I can send CW with the K3.
2) Since the new DSP mods extends the bandwidth down to minus DC, implement
phasing detection to improve the opposite sideband rejection. Even without the
bandwidth ext
Who from Elecraft is coming to the Orlando hamfest and what color are
the handout hats going to be?
73, Mike NF4L
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Pos
Yes they do You can send the rig to them and they can do all the
modes,...some are freeothers cost. Support can send you the details
Lee - K0WA
"Something I am going to do this summer"
In our day and age it seems that Common Sense is in short supply. If you
don't have any Commo
Does anyone else find the processing delay in the sidetone monitor most
disconcerting when using SSB?
73
Tom G3OLB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Po
Excellet! Thanks, Jim!
Randy
On Jan 15, 2010, at 11:06 AM, "Jim Brown"
wrote:
> On Fri, 15 Jan 2010 09:03:55 -0600, Randy Moore wrote:
>
>> Does anyone have the wiring for the CM500 to connect to the K2? Or
>> just the pin-out for the CM500 stereo connector?
>
> Connect the "tip" of the CM50
On Fri, 15 Jan 2010 09:03:55 -0600, Randy Moore wrote:
> Does anyone have the wiring for the CM500 to connect to the K2? Or
> just the pin-out for the CM500 stereo connector?
Connect the "tip" of the CM500 mic connector to the mic input pin of the
K2, connect the "ring" of the CM500 mic connecto
On Fri, 15 Jan 2010 11:05:41 -0500, wrote:
>Does Elecraft offer an update service that would install all updates required
>to bring an older radio up to the current configuration or as close as
>possible?
>
>I looked on the website but didn't see any mention of such a service.
>
[snip]
I'm sure
Does Elecraft offer an update service that would install all updates required
to bring an older radio up to the current configuration or as close as possible?
I looked on the website but didn't see any mention of such a service.
Thanks,
Jeff
___
Let me build a K2 for you. My prices are reasonable and you receive a new
radio with the options you want. I have built almost 300 of the little guys.
Please respond off of the reflector.
73
Alan
W1HYV
__
It's the mic connector I'm asking about. This is probably a dumb
question, but it's only the second mic I've ever owned in about 45
years of hamming!
Randy
On Jan 15, 2010, at 8:59 AM, Randy Moore wrote:
> Does anyone have the wiring for the CM500 to connect to the K2? Or
> just the pin-out
Does anyone have the wiring for the CM500 to connect to the K2? Or
just the pin-out for the CM500 stereo
connector?
Tnx es 73
Randy, KS4L
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailm
I have an Astron SS-30 power supply that was
Only used for 4 months for sale. I would take
$90 + shipping. I have switched to solar.
Thanks
Dan N0DT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: h
> Any chance of getting the old one archived out there? I didn't look too
> terribly hard in the FTP server for it... But it would be nice to be
> able to compare and see how the enhanced mic audio and what not are done
> as the series 1uF caps from W9AC are still in place...
Brett,
On Rev. D of
Appreciate your time pointing me there. I work in this stuff all day and
sometimes I just get lazy. At least I was willing to admit I was such. ;)
Again thank you sir.
~Brett (KC7OTG)
On Jan 15, 2010 12:15 AM, "David Pratt" wrote:
In a recent message, Brett Howard wrote ...
> > > Any chance
David Pratt wrote:
>In a recent message, Brett Howard wrote ...
>>
>>Any chance of getting the old one archived out there? I didn't look too
>>terribly hard in the FTP server for it... But it would be nice to be
>>able to compare and see how the enhanced mic audio and what not are done
>>as the s
Whats the difference between a KFL3B-FM filter and a KFL3A-FM filter?
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
In a recent message, Brett Howard wrote ...
>
>Any chance of getting the old one archived out there? I didn't look too
>terribly hard in the FTP server for it... But it would be nice to be
>able to compare and see how the enhanced mic audio and what not are done
>as the series 1uF caps from W9AC
89 matches
Mail list logo