K2AV posted:
> Using slope 000 is likely most of your problem. With that
> setting all signals regardless of strength are set to the
> same level regardless of how loud they are coming in.
Actually AGC SLP 015 flattens the audio output. AGC SLP 000 is the minimum
AGC action but it still reduce
"The Smiths" asserted:
> Having the Slope set to 000 is like not having the AGC on at all.
Not really. AGC SLP 000 still produces significant AGC action. See K8ZOA's
paper. There is considerable white space between the Slope=0 curve and the
AGC = OFF line. That's why Dave proposed enhancing t
During the CQ 160 the K3 performed very well. Also in the (small) pile-ups.
Only mushy experience I had the following situation:
- Being on the DX cluster
- Everybody clicks to you through some bandmap
- Therefore everybody calls on exact the same freq
No wonder it sounds mushy.
(exception: K2'
Hi all,
I will be running the UK Elecraft Net at 09:00z on 3658 +/- QRM as usual on
Sunday. I hope to see you all there.
73 Ian
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/
Hi Ruben,
I use samlex 1223's for many years, mainly on my expeditions and also
with K3. You have to know that there are PS's made in BY which look
exactly like the original 1223 but they have no output filtering and
they have a different 12V connector. They do have a noise issue,
particularl
I have been noticing a similar anomaly since 3.76.
The only difference is it happens when I go to 2.9.
As I increase the width I see the filter switch at 2.8 (I have the 2.7 SSB
filter and 6.0 AM filter) and then at 2.9 it goes dead until I advance it to
3.0 and from then on it continues as it
This morning I turned on K3 #250 and got a ERR AT3 msg which was strange
as when I shut down the radio yesterday, everything was fine. I rarely
use the ATU as I have a Steppir beam and inverted L which I run thru an
external tuner.
I started troubleshooting and went thru the following sequences:
Hi Guy,
The problem reported has the classic characteristics of in-passband IMD
caused by a small dynamic range (IMDDR3) IF system, rather than being
something caused by the AGC sub-system. Yes changing the AGC's loop
characteristics will alter the effect, but the root cause is still
non-linea
Tom and All,
Sounds familiar! Your K3 serial number is low enough to be one that may be
affected (mine is #96) by a problem that is fairly easily corrected.
There's a cap that needs to be removed (if it hasn't been already, and
another small cap that needs to be added. I see you have copied G
K-3 selling on E-Bay 6 Feb (Item # 300394149258) fully loaded with all
filters main and sub-receiver and EVERYTHING else with "BUY NOW" price of
$1,600.00 and 12 bids to $1,200.00. I reported this obvious hacked scam ad
to E-Bay and the Ad disappeared within an hour this morning. I love a good
dea
Hi Scott,
Just a shot in the dark: Have you checked your filter configuration?
If you happen to have an empty slot enabled for those modes, you'll
get exactly the behavior you described. Use the K3 Utility to look
for a slot that you know to be empty but with the Bandwidth set to 2.8
an
Attempted to upload new firmware to the K3 this morning and got the "MCU
LD" error. Now the K3 is basically dumb. In the manual, it says to
unplug the power for 5 seconds, Hold the power button for approximately
10 seconds and then re-load the firmware.
My problem is that I can no longer get th
Use a USB to Serial adapter or an RS 232 cable, do not attempt to load
firmware through the microHAM router. It works sometimes, but this
mechanism is not reliable for firmware load.
Dick, K6KR
Sent from my iPhone
On Feb 6, 2010, at 8:14 AM, W4CCS wrote:
> Attempted to upload new firmware
The K3 bootstrap loader runs at 38400. After firmware loaf, the K3
Utility restores the speed it started with. However if the firmware
load fails, the K3 may stay at 38400.
Dick, K6KR
Sent from my iPhone
On Feb 6, 2010, at 8:14 AM, W4CCS wrote:
> Attempted to upload new firmware to the K3
Hello Julian,
I also noticed the other day that I was hearing a "whoosing" in the background
on
a CW station that I never heard before. I was afraid I had blown a preamp or
something. I finally found that I had set the NB on Wide 7, and as soon as I
turned it off or back to Nar 1, the proble
Thanks to all.. The 38400 setting and a straight cable corrected the
problem.. All firmware uploaded and we are back in business..
Again, Thanks
de W4CCS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
He
> The K3 bootstrap loader runs at 38400. After firmware loaf
Sliced? Or unsliced? 8-)
Will you be going to Visalia this year?
73,
George T Daughters, K6GT
CU in the California QSO Party (CQP)
October 2-3, 2010
__
Elecraft mailing
I've been meaning to query the group about this for some time but the latest
episode has finally prodded me into asking.
I have noted before that when I ran the utility program after closing it and
then trying to use my logging program, the log couldn't connect using the
serial port. Apparentl
Hi,
Yes, I have the same problem and Elecraft has been made aware of it. I
almost never use the utility for anything else than downloading new
firmware, but I can believe that the program opens the com port whether it
needs it or not.
Knut - AB2TC
Wes Stewart wrote:
>
> I've been meaning to q
It's not a problem here.
Dunc, W5DC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Pl
Jeff: Thanks for the suggestion concerning the K3's filter configuration,
however, I'd already checked this. According to the K3 Configuration
Utility, FL3 is enabled for LSB, USB and AM in both receivers. Another point
to keep in mind is that FL3 is only selected at a BW setting of 2.7 kHz or
belo
Dave indicates that the problem occurred when the pileup consisted of four
or five loud stations. This leads me to wonder if the cause is the K3
hardware AGC threshold being too low, even after the mod introduced two
years ago. That mod was supposed to raise the threshold from S9+5 dB to
S9+25-30 d
Yes.
For non-portable use how about a "K3 Pro" or "K3 MK V++" that clips a few
circuit traces and has a daughter board that uses two or three filter slots to
house a stout IF amp, an H-mode second mixer and a PIN attenuator before the
DSP? The one remaining filter would only have to be good e
I have an issue whereby i cannot run cw from my k3 serial port and
logging software WT.
Bob N6TV has been looking into it for me but. Still cannot tx.
Was their a solution to get it released from the utility!
73's
Ken..G0ORH
Sent from my iPhone
On 6 Feb 2010, at 17:38, ab2tc wrote:
>
> H
I can recall seeing this a couple of times, but not recently. The utility
does open the com port and try to interrogate the radio to find out what
firmware is installed, regardless of whether you use it for anything. The
problem may be related to using the VSPE virtual serial port software, since
I'm trying to really learn how to use the KSDP2 to it's full advantage
and I'm more than a little frustrated with the operators portion of the
manual. Is there a good tutorial available for the KDSP2?
Thanks
David
KD0R
K2 6708
__
Elec
Neither here,I can open any program using same port and it will work fine,my
utilities program will never lock the port.
I am using the version 3.76 which also downloaded smooth and easy with no
problem,my K3 # 2192 has no problem at all so far.
AD4C
"For a refined ham it is compulsory to o
The K3 Utility closes the serial port at exit. Windows process
termination also closes open file handles. However the close process
invokes device drivers to actually release the hardware, and sometimes
that doesn't work as you might hope.
Dick, K6KR
Sent from my iPhone
On Feb 6, 2010, at
I always shut down LP-BRIDGE, a virtual port program used for sharing the K3
serial port, before starting up the K3 utility. If memory serves, this was
addressed early on and recommended.
Monty K2DLJ
>
> I can recall seeing this a couple of times, but not recently. The utility
> does open the
> I'm using the Microham router software to talk to the K3 and this has
> been working great until now.
DO NOT use microHAM Router to upload firmware to the K3.
It IS NOT SUPPORTED. Find a computer with a hardware
serial port or a dumb external USB to serial converter.
73,
... Joe, W4
You can use microHAM, but you have to select:
No radio and dissable router queries in the microHAM software.
El 06/02/2010 21:21, Joe Subich, W4TV escribió:
>
>
>> I'm using the Microham router software to talk to the K3 and this has
>> been working great until now.
>
> DO NOT use microHAM Router
My opinion --
Since Joe W4TV is an authority on microHAM gear, I would say "use it at
your own peril" if you insist. Yes, there have been reports of success,
but Joe says IT IS NOT SUPPORTED! Please do not complain that you broke
your K3 with a firmware load when you used the microHAM router.,
Setting "No radio" does not guarantee transparent operation
by microHAM Router. Again:
DO NOT PERFORM A FIRMWARE UPLOAD USING MICROHAM ROUTER
WITH ANY MICROHAM INTERFACE. NO EXCEPTIONS.
Even though I know my way around Router and the microHAM
interfaces well enough to generally ma
Hi Everybody.
It's time for something a bit different ... QRP SSB Contesting!
2010 QRP-ARCI Fireside SSB Sprint
Date/Time:
2000Z to 2359Z on 7 February 2010
Mode:
HF SSB only.
Exchange:
Members send: RS, State/Province/Country, ARCI member number
Non-Members send: RS, State/Province/Countr
Dave Hachadorian wrote:
>
> Tonight I used a pair of K3's in the Sprint practice. Several
> times I had a pileup of four or five loud stations calling me.
> With AGC turned on, they were all mushed together, and I couldn't
> copy any of them.
>
> So I turned the AGC OFF. Now this introduces
When is the next one for CW ?
AD4C
"For a refined ham it is compulsory to own a k3"
--- On Sat, 2/6/10, Jeff Hetherington wrote:
From: Jeff Hetherington
Subject: [Elecraft] ANNOUNCEMENT: QRP-ARCI FIRESIDE SSB SPRINT
To: qr...@mailman.qth.net
Cc: elecraft@mailman.qth.net, memb...@qrp-canada
I'd be interested in that too David, if you find one. Way too many functions
for so few buttons. Apparently it has a clock too. I've yet to see it!
73,
Ken Alexander
VE3HLS
--- On Sat, 2/6/10, David Heinsohn wrote:
> From: David Heinsohn
> Subject: [Elecraft] K2 KDSP2 Tutorial
> To: "Ele
Hi Bill
Thanks for the suggestions. I'm now working the issues with Gary Surrency.
73
jim ab3cv
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
Barry N1EU wrote:
>
> You need to maximize your rf/af dynamic range - that is what is going to
> turn that mush into a beautiful symphony of distinct signals of varying
> levels. What has worked well for me is AGC off (although AGC on works
> fine as well), high isolation headphones, and the ga
Hi gang,
I will be away from my station tomorrow, and Mark, K4SO, is buried by 2 feet
of snow and has no power.
So, we need someone to be NCS. I haven't heard from Roger, K7SJ. Perhaps
he will be able to step in. Otherwise, we need someone else to help out.
It isn't difficult. The pace is e
Ok so far I've only had the pleasure of operating on a gain antenna in
the HF bands for 2 days in my lifetime. I'm in the process of working
out a setup that will allow me to gain at least one day a year... ;)
I'm looking at a mast setup from Blue Sky Masts
(http://www.blueskymast.com) From the
Good Evening,
I try to keep my announcements and reports cheerful and filled with stories
about the outdoor occurrences in my area. This week is different. We have
lost one of the fine gentleman of amateur radio. On the afternoon of Thursday,
February 4th, I got an email headed with W6ZH -
Does anyone use the Ameritron ARI-500 with the K-3?
Thanks
Bob W6VY
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list h
It seems I read somewhere that there is a diode mod for the K2 so that a
straight key can be input into the unit along with a paddle and the K2
can tell the difference and one can use both keys?
Or was I dreaming :)
N1BBR
--
bw...@fastmail.net
__
On Sat, 2010-02-06 at 20:31 -0800, dw wrote:
> It seems I read somewhere that there is a diode mod for the K2 so that a
> straight key can be input into the unit along with a paddle and the K2
> can tell the difference and one can use both keys?
>
> Or was I dreaming :)
You were not dreaming! The
Rose's approach to customer service and quality are an extension of the
Elecraft model. She does great work and listens to the voice of her
customers. You can't do any better.
73
Greg
AB7R
On 2/5/2010 12:54 AM, David Ferrington, M0XDF wrote:
> Rose will also customise further, I have two ext
What happened to the Elecraft Amps? Did they get beyond 'proto: gee I want
one' stage?
--
View this message in context:
http://n2.nabble.com/What-became-of-the-Elecraft-s-KPA1500-and-KPA-800-tp4528292p4528292.html
Sent from the [OT] mailing list archive at Nabble.com.
__
My K3 was working fine last time I used it. Tonight I turned it on and
noticed a similar problem -- no audio in USB or LSB modes whenever I
set the width to 3.00 kHz or less. Tried downgrading from 3.76 to 3.63
but no change. Checked all filter settings in the config menu, nothing
out of pl
In a recent message, dw wrote ...
>It seems I read somewhere that there is a diode mod for the K2 so that a
>straight key can be input into the unit along with a paddle and the K2
>can tell the difference and one can use both keys?
>
I agree with Brian, this arrangement works quite well, although
49 matches
Mail list logo