__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: htt
Good Evening all,
I have my K3/10 (SN 1396) with the Aux Receiver and general coverage filters
for sale. Here is what I have in the K3/10
K3/10,
KAT3, Auto-tuner
KFL3A-2.7, SSB Filter(note the 2.7k filters in both the K3, and KRX3 are
the stock 5pole filters)
KFL3A-
Changes to a version identified to any level of testing always causes the
version number to increment. Unless they blow it and just plain forget.
:>) They're up to at least 4.60. Versions in field testing are usually
distributed by ad hoc lists and only show up in the directories when deemed
re
After you set your preferred antennas to the bands you want etc...do tune
on say CW portion, then a couple of times through the SSB portions to
create 'store point in the kat500 memory bins'
>From this point on, no manual initiation of tuning is needed.
When the KAT500 reaches the threshold you s
For now you can attach a straight key and hold it down when you want
to do a manual tune and release it when the tuner stops tuning,
although I don't see the problem with two holds of the tune button.
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Sat, 17 Nov 2012 14:22:
Has the fixed beta been posted to the web site beta area? I see version 4.58
posted. Has the version number NOT changed?
Charlie, W4FI
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailma
Good Evening,
It has been very foggy this week. It is hard to tell the time of
day. If you walk too fast you get pretty wet :) Under the trees there
is a steady dripping which soaks into the fir needles very well. I saw
one elk disappear into the mist, a grouse who left a wake, and a de
Thanks to all that replied off list with suggestions. The problem is fixed.
It was actually two problems. The first and most severe was RF feedback
into the transmit audio. I put a ferrite on the mic cable from the Radio
RRC box to the K3 and that helped some, but reducing power to about 15 W
cu
Hi All,
I have a KFL3A-2.7K Filter for sale. All my main and sub receiver filter
slots are full, and this came with the rig when I bought it used. Probably
left over when the 2.8K filters were installed.
Contact me off-list and make me an offer if you're interested.
Thanks and good
The weekly Elecraft SSB net usually meets on Sundays at 1800Z on 14.3035 MHz
+/- QRM. The bands will taken over by the ARRL SS contest tomorrow, so
let's skip the hassle and cancel this week's net. See you next week..
73,
Phil, NS7P
__
For info.
Mike VP8NO
Winds have further increased during the later afternoon and evening,
During high tide the waves were crashing over the south perimeter rocks,
flooding the area around vertical No 2 (our 80 to 10 antenna for Station
2). One of the waves has ripped off the coax cable from t
Which Rigol model spectrum analyzer do you use and are you happy with it?
Mike AC6JA
In a message dated 11/17/2012 1:33:32 P.M. Pacific Standard Time,
n...@elecraft.com writes:
I've modified the K3 software to allow use of the FM filter for ESSB
transmit. (The current beta release, 4
On 11/17/2012 3:13 PM, km5ps wrote:
> Where can I look for more information on a ERR TXG error. I turned on
> the K3 today and was not getting any power out, did a tx calibration in
> K3 Utility and got this error ERR TXG. I am sure there has been
> postings before, but I don't know the link to
Well, I guess it is new to me. I did not know it was used so long ago.
Why not 8 tonesbecause I have trouble decoding 2 in my head.
I hope everyone enjoyed the diversion. I figured that this group, being a
good number of hard core CW operators, would appreciate it. I initially
thought of
3 Main features I would to see.
1 A via out put on the main k3 or a way to integrate the k3 lcd out into the p3
so you could adjust the filter on the large screen.
2 Voice button feed back like the smaller kx3 has.
3 an rather net jack for direct internet remote control.
Thanks Charles
__
Folks, let's end this OT thread for now.
Eric
List Modulator
www.elecraft.com
_..._
On Nov 17, 2012, at 12:49 PM, Larry Makoski wrote:
> On 11/17/2012 9:26 AM, Don Wilhelm wrote:
>> Get on the air for your last QSO!
>> QSLs are available, but whether or not they are sent depend on the
>> outc
Have a problem with my K3, Local amateur just 300yrds away from me,was
transmitting and beaming direct at my antenna,My AFC was off, his audio and
signal was so loud I think it has damaged part of the RF Stage,When I switch
the K3 on the received audio is ok for about 2 mimutes then I get a rush
FYI- I am #1877 and just received notice that the charger and paddle will be
shipping shortly.
Just need the amp and 2m and I'll be happy. Until I start bankrolling the K3
with the works. KPA500 included.
Mike Mardis
__
Elecraft maili
OK...maybe someone can answer this so I don't have to take the knob off
of my K3 (I have it set just the way I like it).
Is the VFO A knob hollow on the back side? Even better, if someone has
a knob lying around please e-mail me a picture of the back off the
reflector.
--
73,
Gary K9GS
G
Where can I look for more information on a ERR TXG error. I turned on
the K3 today and was not getting any power out, did a tx calibration in
K3 Utility and got this error ERR TXG. I am sure there has been
postings before, but I don't know the link to search for them.
Any help would be great
On 11/17/2012 9:26 AM, Don Wilhelm wrote:
> Get on the air for your last QSO!
> QSLs are available, but whether or not they are sent depend on the
> outcome of the world after Dec 21, 2012.
>
> 73,
> Don W3FPR
>
> -
Zombie Shuffle is that night!
http://w2lj.blogspot.com/2012/11/2012-zombie-shuffl
I've modified the K3 software to allow use of the FM filter for ESSB
transmit. (The current beta release, 4.58, already allows AM transmit
with the FM filter.)
The AM filter (6 kHz BW) is still a much better choice for AM and ESSB
receive, because it provides better close-in dynamic range. B
Hello Pete!
Yep...the culprit is the logging program but not just N1MMLogger32
does the same thing. I posted to the Logger32 reflector and the program
author told me that when changing bands, Logger32 send a macro string
similar to this: FR0;FAfrequency;MDmode
The FR0 command is what rese
I've confirmed the K3 operates as advertised when you change bands using the
Band up/down button. Changing bands from N1MM resets the split.
I've posted a query on the N1MM reflector and asked for a software
modification which I rather suspect could impact any radio unless the code
only resets
That sort of integration is not implemented yet, but AUXBUS
communication will allow for it, so expect to see something along the
lines of what you describe in future firmware releases (both KAT500
and K3).
73,
~iain / N6ML
On Sat, Nov 17, 2012 at 11:22 AM, wrote:
> Just wondering if the
It's not implemented yet -- should be available in an upcoming release.
73, Matt VK2RQ
On 18/11/2012, at 3:00 AM, "Helmut Mayrhofer" wrote:
> Hi,
> I'm not sure if I'm doing wrong ?
>
> Menu Point: CW WGHT, as it is written in the Manual:
>
> **Additional functions of this menu entry, via
Has anyone set up their remote system with LP-Pan running on a PC at the
remote site?
How can the serial control path be configured so that the RemoteRig control
data and LP-Pan share the serial port on the K3? LP-Bridge is normally used
to accommodate other CAT control programs residing on t
Why only two tones? If we use an 8-tones "multi-FSK", we can get more
bandwidth. Here is an example of such a code (or in fact language) that is
meant to be human-readable:
http://en.wikipedia.org/wiki/Solresol
This is what inspired the alien musical language in the movie "Close Encounters
of t
On 11/17/2012 9:30 AM, VE3GNO Daniel wrote:
> Any discounts for Doomsday :-))? I am looking to complete my K3 line
> before the end of the world loool, being sure the K3 line will resist
> the cataclysm
"Dear 2012,
Hey, chill out about Dec 21. Some dirt bags invaded our country while
we were w
Outstanding, Ken. I think Howard also assisted me and one of his suggestions
was to verify how tight those screws were. Alas I didn't have your good fortune
;-), and ultimately I needed to send 'er in. But at least I knew Howard had
done everything possible to resolve the issues before we were l
Now and then I have used Jim K9YC's "A Ham's Guide to RFI, Ferrites, Baluns,
and
Audio Interfacing" as a reference but very recently I finally read the whole
thing straight through, and it finally dawned on me that Jim advocates putting
a
common-mode choke right at the feedpoint of the antenna
I'll break out my gas mask from Y2K, if I can find it down in the bomb
shelter ...
- 73 de Mike, K6MKF, W6NAG, VP NCDXC, Conway Reef 2012, Dachshund Rescue,
Maui
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Keith Heimbo
This is funny because I just posted the same thing. However, all I do is
change bands (using N1MM) and without doing anything else, go back to the
original band and the K3 is no longer in split mode.
I thought I understood the manual to say the K3 remembers the split mode and
frequency per band s
Just wondering if the K3 and KAT500 are capable of fully automatic TUNE
operation?
What I mean is, is there any way you can just push the TUNE button on the
K3 (or the KAT500 for that matter), have the K3 transmit a carrier (25-30w),
have the KAT500 tune the antenna, and then have the K3 AUTO
If I'm reading the manual correctly, when I have the config setting SPLT SV
set to YES, the K3 should save the split, XIT and RIT information on each
band. But, with this value set to YES, and I am split on say 30 meters then
change to 20 meters and go back to 30, the sub receiver is still at the
This O.T.'s brain, used to hearing several signals at once in the rx
passband, tries to decode each frequency simultaneously as a separate
signal. So one signal is sending only dits and the other is sending only
dashes!
I'd not want to train my gray matter to consider two different requencies as
o
According to the Mayans the date you refer to in our calendar system was the
end of one calendar period and the beginning of another for them. The Mayans
believed the world would never end.
So, bad news, you will have to pay your taxes next year after all!
Mike, ks7d
Sent from my iPhone
On No
Only if you consider "patented in 1903" to be "new." It was one of the
methods used to key an arc converter for CW.
73,
Fred K6DGW
- Northern California Contest Club
- CU in the 2013 Cal QSO Party 5-6 Oct 2013
- www.cqp.org
On 11/17/2012 6:31 AM, Ken Nicely wrote:
> A new digital mode that can
Don, Keith,
Isn't that the event that moves us into the 5th Dimension where all QSO's
needing completion will need to use a K-Line or lesser K2?
:-)
Sirens are winding up now
Gary
On 18 November 2012 03:02, Keith Heimbold wrote:
> Doomsday net? What time and frequency? I am so there!
>
Will the QSL's be carved in limestone by a Mayan calendar maker?
73, Ron AC7AC
-Original Message-
Get on the air for your last QSO!
QSLs are available, but whether or not they are sent depend on the outcome
of the world after Dec 21, 2012.
73,
Don W3FPR
___
Hi Elecraft Team
Any discounts for Doomsday :-))? I am looking to complete my K3 line before the
end of the world loool, being sure the K3 line will resist the cataclysm
vy 73
VE3GNO Daniel
From: Don Wilhelm
To: 'Elecraft'
Sent: Saturday, November 17, 201
Looks like you've gone and broken it Don, the nowzerodays website has
exceeded its bandwidth allowance! What a great idea though...
73 Stephen G4SJP
On 17 November 2012 14:26, Don Wilhelm wrote:
> Get on the air for your last QSO!
> QSLs are available, but whether or not they are sent depen
Hi,
Thanks, that seems to fix that problem.
Knut - AB2TC
Phil&Debbie wrote
> “...But there are bugs. Here is the first one I can reproduce 100%”
>
> You need to go into the Utility and set up the preferred antenna (or last
> used) for each band.
> Phil – AD5X
>
--
View this message i
Hi,
I'm not sure if I'm doing wrong ?
Menu Point: CW WGHT, as it is written in the Manual:
**Additional functions of this menu entry, via numeric keypad:
Tap 1 to select SSB -CW (default) or SSB +CW (allows CW in SSB modes). **
Every time I Tap 1, I got N/A !!!
Sending CW from SSB mode would
Doomsday net? What time and frequency? I am so there!
Keith
AK6ZZ
Sent from my iPhone please excuse typos
On Nov 17, 2012, at 8:16 AM, "Don Wilhelm" wrote:
> Get on the air for your last QSO!
> QSLs are available, but whether or not they are sent depend on the
> outcome of the world after D
A new digital mode that can be sent and received without a computer. You
just have to learn it.
http://www.ke3c.com/ToneWave.php
Ken (KC) Nicely KE3C
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Get on the air for your last QSO!
QSLs are available, but whether or not they are sent depend on the
outcome of the world after Dec 21, 2012.
73,
Don W3FPR
Original Message
Subject:Doomsday - The End Of The World, Special Event
Date: Sat, 17 Nov 2012 08:22:05 -0500
Fr
not sure if this is the 'fix' or not
but check out the Config menu
under CW Wght
it says:
Tap 4 to select VOX NOR (default) or AUTO OFF. The AUTO OFF setting
turns CW VOX off on power-up, avoiding accidental keying by attached PCs,
etc.
hope it helps
--
View this message in context:
http://el
[...] Rene worked on my rig. He is a really nice guy, provided great
explanations and traced out my issues in fairly short order.[...] 73 Paula
k9ir
N4OI wrote
> [...] My intermittent power problem returned after reseating the boards...
> If it occurs at low power, I will check with the Elecraft
Sorry Chuck I saw that also and I thought you meant the Beta main release my
bad your post is what kept me from downloading it. Fingers before brain this
morning, I am glad you brought that bug up.
Fred/N0AZZ
-Original Message-
From: hawley, charles j jr [mailto:c-haw...@illinois.edu]
Se
Well it had a bug as to the K144XV use and Wayne said he just fixed it
yesterday...so I was waiting to update.
Sent from my iPad
Chuck, KE9UW
(Jack for BMW motorcycles)
On Nov 17, 2012, at 5:28 AM, "Fred Smith" wrote:
> Yes it has Wayne posted it a day or 2 ago it was ready.
>
> 73,
> Fred/N
Yes it has Wayne posted it a day or 2 ago it was ready.
73,
Fred/N0AZZ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of hawley, charles j jr
Sent: Saturday, November 17, 2012 5:23 AM
To: Wayne Burdick
Cc: Geoffrey Downs; elec
Has the revised beta been published yet on the web site?
Sent from my iPad
Chuck, KE9UW
(Jack for BMW motorcycles)
On Nov 16, 2012, at 10:08 AM, "Wayne Burdick" wrote:
> I just fixed this and will send you the new firmware to test. It
> should be up on the web site later today.
>
> Wayne
>
53 matches
Mail list logo