The DISP key sends the Y of X.YYY.ZZZ on the display. Is there a way to read
the X and ZZZ parts too? You can get it to send X.YYY by changing bands, but
I'd prefer to be able to get a full readout without changing bands. The KX1
reads both sides of the VFO freq when the band button is
Can I use a CAT5 coupler and cat 5 cable to extend the distance between the
two? I'd like to keep the amp where my KPA500 is in the other room while
operating from my laziboy. :)
__
Elecraft mailing list
Home:
Hi Greg,
Really appreciate the detailed instructions! Still waiting for my 9000
and new Enloops, but I will follow these recommendations as soon as it
arrives. I didn't even think of the importance of Low Discharge verses
the high Ah rating, but it is clearly an important parameter.
Rich
Chris,
I am not certain what you are referring to as a CAT5 coupler, so the
answer is maybe.
If the CAT5 coupler is an RS-232 to Ethernet converter, it should
work, but if it simply takes the RS-232 signals and simply connects them
directly to the wires of a CAT5 cable, there will be a limit
A CAT5 coupler is a double female junction that allows two spans of
CAT5 cable to be butted together to form a longer cable. In general,
these don't hold the longer cable within CAT5 specs, but that may not
be important in this application.
The total maximum cable span is probably a question for
Hi David,
One thing to check that is fairly common is the 3.5mm serial jack which
plugs into the top of the XG3. Just make sure that it's fully inserted into
the top.
If you're still having trouble, please contact Elecraft support for
additional help.
73,
Paul
--
View this message in
The KWM-2 was IIRC 1500 Hz -- and my FPM-300 was 1750. *That* was too much, and
inspired a relay-switched front -panel RIT control. The design reason was
sound (no pun intended, for once) enough; the transmit IF filter had to
suppress harmonics of the keyed tone for a pure signal. This is
I then removed all 8 batteries and checked their voltage (no load, just
with an old Simpson VOM) and 4 batteries measured 1.2 V and the other 4
were at 0.0 V. I am not sure why they would be different, nor do I
understand the BATT ERROR message.
[Others have explained BATT ERROR.]
It
Let's try this a third time to get it right.text only!
Heil/Elecraft Proset K2 for sale.
Virtually new, used very little. Includes adapter or K2/K3, manualand
original boxand shipping carton.
$165.00 delivered by USPS/Canada Post anywhere in Canada or the lower 48.
PayPal only. Please
Thank you Don for your courteous and detailed reply.
My problem turned out to be that RX SHFT was on.
I was getting unexpected results when I performed the procedure
according to the manual. I failed to recognize the RX SHFT response as
an error code. After I duplicated your suggestion (as
Mint KX3 with original factory boxes and packing. Original manual. Purchased
new from Elecraft 12/2012.
KX3-F (factory assembled) SN3072KX3RET-FKX3FL3-F filterKX3-PCKT accessory cable
kitKXUSB
$900 plus shipping
73;steveny3an...@hotmail.com
11 matches
Mail list logo
