Bob I have a friend in CA. who is running that setup and I emailed him to
contact you on this. Sorry I can't help but I run a KPA500 sometimes and a
Alpha 9500 most of the time with my main K3.
73,
Fred/N0AZZ
BTW have enjoyed your books and still reread them from time to time, when
friends rememb
I just purchased an SPE 2K-FA linear. I have a cable I bought that is
supposed to have the K3 control the amplifier much like the cable
between the K3 and the KPA-500. The control is not working.
The linear manual is a bit lacking in clarity on the matter of the
cable, and I find a lot of conf
You can find a copy of V2005 at: http://www.w2blc.net/K3_EZ_V2005.zip
Perhaps that will help you.
Bill W2BLC K-Line
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
P
I need help installing K3_EZ. The zipped file I have is titled "K3_EZ2007" and
is 6, 618KB in size. I can't remember if I renamed the file to mark a 2007
version or not.
My problem is with the "ClickOnce Application Deployment Manifest", which for
me should be renamed "...Applicaiton Denial Man
Their website shows the CW and SSB transmit frequency of 50.107
Ed W0YK
Lance W7QJ wrote:
Vic, they told me they are not planning to do anything on 6m. However, if
you are
interested in contacting KH9 on 6m, WA2YUN has a great station set up there.
His
email is good on QRZ.com. He has be
Vic, they told me they are not planning to do anything on 6m. However, if you are
interested in contacting KH9 on 6m, WA2YUN has a great station set up there. His
email is good on QRZ.com. He has been there for a couple of years already GL
and VY 73, Lance
On 10/31/2013 4:55 PM, Vic
What is super, ultra, incredibly cool is this: since they are using Elecraft gear and I am
in California, this means that there is a chance...that I can work them on SIX METERS!
On 10/31/2013 9:37 AM, Fred Smith wrote:
Eric I saw that in the Daily DX my main amp is down so I will be using my
KP
In my view the manual is not wrong in that respect. It tells you to set the
TUN PWR menu item to NOR before you start.
However, I have always found a different problem. The last step of the
procedure tells you to hold TUNE and adjust the menu parameter (WMTR: LP or
HP) for exactly 5w or 50w. B
Eric I saw that in the Daily DX my main amp is down so I will be using my
KPA500 and make do with Less HP LOL. I only have K9W on 2 bands both SSB
will be trying to fill out on phone except for 160m, not a good enough
antenna for it..yet 8>)
It's times like these when I really enjoy my K3 wit
What is cool is they can get into SS - CW and give out PAC for a mult
Big CW weekend.
Lee - K0WA
In our day and age it seems that Common Sense is in short supply. If you don't
have any Common Sense - get some Common Sense and use it. If you can't find
any Common Sense, ask for help
I finally figured out what was happening. The procedure in the manual is wrong!
On step 5, the power is set by the FRONT PANEL POWER CONTROL
On step 7, TAP tune, do NOT hold it. If you hold it, you get the tune power
which
is a separate menu item.
To key the tx in CW I had to insert a shorted
I have a K3 with a second receiver that I use rarely but I enjoy having it for
DX pileups that work split. It has saved me buckets of time getting through the
pileups. I also plan to use it this winter for receive antennas for the lower
bands. However since I am into 6m I find having a visual to
Good to hear you have it solved Rob.
Glad I could help guide your troubleshooting steps.
73,
Don W3FPR
On 10/31/2013 7:48 AM, kc2vmp wrote:
Don,
Thank you for your guidance! It turned I had a short to ground at R88 and 2.7K
resistor at R89 from the UN-PCB supplement. While I know it is comm
Don,
Thank you for your guidance! It turned I had a short to ground at R88 and 2.7K
resistor at R89 from the UN-PCB supplement. While I know it is common to place
parts incorrectly, I was glad not to have made the mistake of simply not
soldering something.
Again, thank you for the quick and
There have been many very good answers the main reason I switched to the
K3's from the Yaesu FTDX-5000MP's a bit better main receiver on the Yaesu
at that. The reason the second receiver same as the first with the same
amount of filters if wanted. Not second rated ones like all the others top
of t
The numbers tell the real story about it they do not lie it is the #1 QRP
radio in the world without lugging around a computer with you and IMHO does
better than those. It shows in the tests also no wonder it has became de
facto standard for QRP radios around the world.
For an SDR it and the K3 se
I had been meaning to change the CW pitch on my K3 since I read about it
on the reflector a while back. I finally changed it this morning from
around 650 or 660 down to 440 Hz. All I can ask is, "Why did I have it
at 650 or 660 Hz and why did it take me so long to move it down?!"
I'm listening
17 matches
Mail list logo
