I'm looking through the "K3 & KX3 Pgmrs Ref, E11.pdf" and there doesn't
seem to be a way to send the "M1" message remotely. Am I searching for
the wrong string?
Thanks for any help.
--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 = latt
Whoa... for $30 ... super duper heavy duty.
== JHR ===
On 6/12/2014 8:46 PM, Rick Miller - AI1V wrote:
If you want something pretty bulletproof, try these surplus containers:
__
Elecraft maili
If you want something pretty bulletproof, try these surplus containers:
http://store.colemans.com/cart/aviators-kit-boxcontainer-aluminum-p-260.html
I have two of them. One I was able to fit a block of foam and cut it out so
the K3 fits very nicely. If you tried to drop kick one of these, you'd
OK - got it to work. At first I thought it didn't - but I have now
discovered there is a slight delay when toggling OFF. Now that I know
that - all is good.
Thank you,
Bill W2BLC K-Line
__
Elecraft mailing list
Home: http://mailman.
I learned from a customer that you can set PF1 to toggle SPKR+PH without a
specific macro:
HOLD MENU for CONFIG, then rotate VFO B to SPKR+PH. Then hold the RIT/PF1
button. That assigns PF1 to toggle the current menu selection. Exit the
menu, then try HOLDing RIT/PF1 a couple of times.
73 de Dic
Michael,
I cannot help other than to confirm that I had the same issues with my
K3 using MARS-ALE. I quit trying at that point and I didn't like all the
rapid relay switching with the band switching. What little information I
*did* find was from the MARS-ALE Yahoo Group.
Good luck.
73,
Joel
The AF Gain pot works both ways. It can be used to turn down the gain as well
as turn it up.
Sent from my iPhone
...nr4c. bill
> On Jun 12, 2014, at 1:19 PM, Bill W2BLC wrote:
>
> I need a toggle style macro to mute/unmute the RX audio on my K3.
>
> When I get a phone call or someone come
Bill, I have my PF1 loaded with the following macro:
MN097;DN;MN255;
It toggles SPKR+PH on and off. I leave headphones plugged in all the time
and usually use them, but you could still use this macro even if you don't
use headphones.
I have a similar macro in DXLab's Commander but I can use PF1
I need a toggle style macro to mute/unmute the RX audio on my K3.
When I get a phone call or someone comes in the radio room it is often
necessary that I turn the audio down on the K3. Currently I use a button
for setting AG000 - which effectively kills the RX audio - however, I
must manually
Greetings!
I’m hoping someone has configured their K3 to use PC-ALE or MARS-ALE and can
share their knowledge.
I have my K3 linked to my PC in 2 ways — via sound card (Signalink USB) and via
RS-232. It works fine with FLDIGI and with M110A.
Using the Kenwood radio settings I’ve progressed to
I use one of roses cases for the KX three, it is not a hard case but it makes
it really easy to move around.
Sent from my iPhone this time
> On Jun 11, 2014, at 11:27 AM, wb4...@knology.net wrote:
>
> I use two of these HF cases. One hold the K3 and mic, the other holds the
> P3, Powerwerx p
11 matches
Mail list logo