I ordered one of these
http://r.ebay.com/wUk9wa
had to fool with it a bit to limit the amount of up down swing. its
heavy and does not move around much. the spring is strong so just
resting foot on it wont actuate but not hard to push, the spring is
easy to change for lighter or heavier o
Come on guys. Foot switches are like shoes. No one fits all. I made mine.
Never looked back. I think this thread is over due.
Mel, K6KBE
On Thursday, October 16, 2014 4:09 PM, Ken G Kopp
wrote:
I stick mine to the floor with double-sided tape so it's always where I
expect it t
QLF?
73, Guy
On Wed, Oct 15, 2014 at 2:18 PM, Fred Jensen wrote:
> A J-38 mounted to a piece of plywood will work very well, used it for
> years. Finally made a larger "knob" out of plastic to make finding it with
> my foot under the desk easier.
>
> 73,
>
> Fred K6DGW
> - Northern California
We will usually email you when we are about to ship or about to charge your
credit card.
You can also email us for shipping status at: sales3(at)elecraft.com
(Replace the (at) above with @ for the email address)
73,
Eric
elecraft.com
On 10/16/2014 2:00 AM, Kjell Johan wrote:
Is there a way t
I also had trouble with mine trying to escape and I did not like holding my
foot up.
I placed mine on plywood with a cutout for the switch so it is trapped and
is lower and not on the same level as my foot. Also stapled the non-skid
foam shelf stuff to keep my foot on the plywood.
With it at
Hello,
Can you please remove f9o...@wanadoo.fr from the elecraft
mailing list?
My dad Jimmy died on september 26th and can no more discuss about K3.
That was his hobby.
Please send all friendfull rememberings to all elecraft members from his
family.
Thanks a lot
Elisabeth DA
vk9dlk on 30m psk right now
On 10/16/2014 10:03 AM, ejk...@gmail.com wrote:
I have been unable to find any PSK63, spent some time yesterday looking.
I have been on sound card modes since early 80s never heard or worked PSK63.
Any tips or info on where to find activity would be appreciated. 73
With this recent discussion around frequency references, some on this reflector
may be interested in this GPS-locked agile frequency reference module that will
cost you less than $30 delivered:
https://sites.google.com/site/g4zfqradio/u-blox_neo-6-7
The output is programable from 1Hz up to 10MHz
CR1A Receiver has been spoken for pending arrival of funds.
Jim - W0EB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This lis
I ultimately went to the Boss FS-5U as well. My guitar player used the same
one for years and I figured if that dude couldn't break it, it would be good
enough for me. Normally Open. No modification. I love mine.
Terry, W0FM
-Original Message-
From: Mark Stennett [mailto:m...@stenn
I have for sale a Comm Radio CR1A General Coverage SDR receiver that
covers from low BC band up through the UHF bands (unfortunately minus 6
meters). I bought this 2 months ago for a special monitoring project
and wound up using something different so this is on the chopping block.
See http:
Thanks for all the info. For those who expressed concern for safety and
for myself, I initially erected the tower, and to the best of my
knowledge did all the right things. I've been climbing it regularly for
the whole 20 years with no mishaps. Time and season dictate that I have
a commercial r
PSK spots are here, the PSK63 ones are identified as such.
http://hamspots.net/psk/
wunder
K6WRU
CM87wj
http://observer.wunderwood.org/
On Oct 16, 2014, at 8:03 AM, wrote:
> I have been unable to find any PSK63, spent some time yesterday looking.
> I have been on sound card modes since early
I have been unable to find any PSK63, spent some time yesterday looking.
I have been on sound card modes since early 80s never heard or worked PSK63.
Any tips or info on where to find activity would be appreciated. 73
Thanks
Emory WM3M
gor Sokolov Wed, 15 Oct 2014 07:50:58 -0700
Thanks for addi
Kjell,
The encoder was changed and the speaker shield is no longer required.
You have the latest manual. The YouTube video is the outdated item.
73,
Don W3FPR
On 10/16/2014 5:36 AM, Kjell Johan wrote:
I found some difference between the assemly manual and the YouTube video by
Tim Tucker when
I am hearing that you have an external reference that takes some time to
warm up after you turn it on, and that causes the K3 to move frequency
with the warmup drift of the external reference.
If the external reference is stable when the K3 is turned on, there is
no need for the K3 to ignore t
I've been running with a Trimble Thunderbolt GPSDO and the Elecraft TCXO for
over a year now. I'm in a position to keep the Trimble powered up continuously,
but I can certainly understand the angst of those who can't. It's a trade-off.
I also
keep an old laptop running, and have Lady Heather runni
Don,
The issue isn't whether the TCXO is an improvement over the standard.
The issue is whether the TCXO is good enough for some of the wide range
of uses the K3 is put.
What you are hearing here is that it isn't. Elecraft has responded with
the external locking option. That option, being
Brian,
The High Stability TCXO (1 ppm) is not a separate Elecraft product - it
is an option for the K3 offering better specs than the stock TCXO (5ppm)
- yes, both are a TCXO.
The temperature stability was found to be far better than the 1ppm
specification without the temperature compensatio
Brian,
I'm aware of the TCXO ... it's the only option I don't have ... thought it
might be just a small step to synch it to a GPS receiver instead of some
form of after-market / surplus standard.
Each cellular site has a GPS receiver for clocking, but I have no idea of
the size of the unit, or if
Ken,
There is an Elecraft product called the TCXO. It is capable of
temperature stabilization BUT Elecraft has not implemented that function.
Perhaps though should be given to implementing the temperature
compensation capability. My understanding is that there is some
difficulty in doing th
I found some difference between the assemly manual and the YouTube video by
Tim Tucker when it comes to install the VFO encoder. He mentioned a shield
between the loadspeaker and the VFO encoder board, which is not mentioned in
the manual.
Do I have an old version of the manual (rev G5)?
73 de
Is there a way to check the status of my order, if it is in the post or not?
73 de LA9GJ / Kjell
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecr
23 matches
Mail list logo
